Thank you for watching and hope this helps with solving your jeep no start no crank issue. ✅Please like and subscribe. I undertand not all, no start no crank problems are the same. I think ground is one of the major issues I've come across when trouble shooting these no start conditions..
I finished watching your video about 2 hours ago while I went to the auto zone to buy the parts and if it worked for me I do not have a scanning machine or anything I put my faith in your video and it worked for me thank you very much for helping many people I was crying from despair sad 2 weeks ago I went to have my PCM computer replaced with the diller and it cost me $ 1,884 thanks again for your videos Blessings
I finished watching your video about 2 hours ago while I went to the auto zone to buy the parts and if it worked for me I do not have a scanning machine or anything I put my faith in your video and it worked for me thank you very much for helping many people I was crying from despair sad 2 weeks ago I went to have my PCM computer replaced with the diller and it cost me $ 1,884 thanks again for your videos Blessings
hi,i made a pretty bad short circuit and won t start anymore,you can only hear the click from the starter,i have this code and alternator not charging,fird focus 1.8 tdci,any ideea?
Hey, hope all is well... I have a 2011 Cherokee Overland and keep having issues that keep me off the road. At the moment my truck doesn't start. It's not silent like what u showed In the beginning of your video however, it also doesn't have that try to start try to start try to start sound either. It's more of a tryyyyyyyyyyyyyy sound and cuts of. I also saw that my ground wire was broken so I purchased one and replaced it but no go, won't start. I thought it might be the fuel pump relay under the TIPM and found that the truck already had the recall done because the external relay was installed. I purchased a new external relay and replaced it, again, no go, won't start. I am going to try and take out that other wire u showed, clean everything up and try again, fingers crossed. If u know of anything else it might be please let me know, thank u... Stay safe and stay healthy brotha, thanks again. Keep the videos coming, they're awesome.
Sounds like it turns over or the starter clicks but wont turn the engine over? Have you tried to read the obd codes from it, to see if it registered any codes to help narrow down the issue? Btw thank you for the kind words.
Unfortunately no, I don't have an OBD reader. I'm in the process of purchasing one on Amazon. I believe it's cold the blue drive, in reviewing it, I like the it's platform. Have u heard of it?
And absolutely, you're welcome the words of encouragement... I did try cleaning both wires and tiger other wire that's on the same spot as the black wire, but again, no go....
@@wliii1942 I've never had good luck with those bluetooth app based scanners like blue driver. I have how ever used a cheap bluetooth obd adaptor along with Torque App, till the bluetooth adaptor broke. Was probably made from Chinesium. If you're going to spend the money, add a little to get your self something that will give most bang for the buck, it should be able to see multiple modules. For example for $60 more, you can get Launch CRP 123E and be able to see faults in your ECM, ABS, SRS modules and probably few more. I personally use "launch X431" so far its been on par with high-end scan tools.
This took me forever and it didn’t start. That mesh cable was completely broken in half so I was excited to get it replaced. I used a battery wire... it has a double loop at each end. That should be finer to use right?
Thanks this saved me a expensive truck was internediately starting, after seeing this i checked the ground from the frame to the engine and sure enough rusted.,
Hey I have the same problem it’s a wonderful piece of shit lol I have replaced 2 tipms. I have a document that you would like maybe u can attach it to the video
Thank you for watching and hope this helps with solving your jeep no start no crank issue. ✅Please like and subscribe. I undertand not all, no start no crank problems are the same. I think ground is one of the major issues I've come across when trouble shooting these no start conditions..
I finished watching your video about 2 hours ago while I went to the auto zone to buy the parts and if it worked for me I do not have a scanning machine or anything I put my faith in your video and it worked for me thank you very much for helping many people I was crying from despair sad 2 weeks ago I went to have my PCM computer replaced with the diller and it cost me $ 1,884 thanks again for your videos Blessings
I finished watching your video about 2 hours ago while I went to the auto zone to buy the parts and if it worked for me I do not have a scanning machine or anything I put my faith in your video and it worked for me thank you very much for helping many people I was crying from despair sad 2 weeks ago I went to have my PCM computer replaced with the diller and it cost me $ 1,884 thanks again for your videos Blessings
Thanks this worked you just got your self a subscriber ,
Thank you!
hi,i made a pretty bad short circuit and won t start anymore,you can only hear the click from the starter,i have this code and alternator not charging,fird focus 1.8 tdci,any ideea?
I have this issue the cable appeared ok but added a piece if wire rope to manifold bolt. Still no go
Hey, hope all is well... I have a 2011 Cherokee Overland and keep having issues that keep me off the road. At the moment my truck doesn't start. It's not silent like what u showed In the beginning of your video however, it also doesn't have that try to start try to start try to start sound either. It's more of a tryyyyyyyyyyyyyy sound and cuts of. I also saw that my ground wire was broken so I purchased one and replaced it but no go, won't start. I thought it might be the fuel pump relay under the TIPM and found that the truck already had the recall done because the external relay was installed. I purchased a new external relay and replaced it, again, no go, won't start. I am going to try and take out that other wire u showed, clean everything up and try again, fingers crossed. If u know of anything else it might be please let me know, thank u... Stay safe and stay healthy brotha, thanks again. Keep the videos coming, they're awesome.
Sounds like it turns over or the starter clicks but wont turn the engine over? Have you tried to read the obd codes from it, to see if it registered any codes to help narrow down the issue? Btw thank you for the kind words.
Unfortunately no, I don't have an OBD reader. I'm in the process of purchasing one on Amazon. I believe it's cold the blue drive, in reviewing it, I like the it's platform. Have u heard of it?
And absolutely, you're welcome the words of encouragement... I did try cleaning both wires and tiger other wire that's on the same spot as the black wire, but again, no go....
@@wliii1942 I've never had good luck with those bluetooth app based scanners like blue driver.
I have how ever used a cheap bluetooth obd adaptor along with Torque App, till the bluetooth adaptor broke. Was probably made from Chinesium.
If you're going to spend the money, add a little to get your self something that will give most bang for the buck, it should be able to see multiple modules.
For example for $60 more, you can get Launch CRP 123E and be able to see faults in your ECM, ABS, SRS modules and probably few more.
I personally use "launch X431" so far its been on par with high-end scan tools.
Did you ever fix it
This took me forever and it didn’t start. That mesh cable was completely broken in half so I was excited to get it replaced. I used a battery wire... it has a double loop at each end. That should be finer to use right?
*fine @jeeper Gear
I can't find you on FB do you still have a page?
Great mine doing same thing i hope it fixes mine and i have same code ill let you know if it works for me
Haha we had our jeep do the same thing last summer, wish I'dve seen this before.,
Thanks this saved me a expensive truck was internediately starting, after seeing this i checked the ground from the frame to the engine and sure enough rusted.,
Glad this helped.
Would this work on the model?
Im not sure what you mean.
Where do I get that kind of griund cable? ,
Check in the video description. I posted a link to where you can buy it
Hey I have the same problem it’s a wonderful piece of shit lol I have replaced 2 tipms. I have a document that you would like maybe u can attach it to the video
100% ✓✓✓✓✓ thank you