I appreciate showing the fail and what contributing factors there may have been. Too many people don't appreciate that failure is part of success. Particularly during the learning process. Good job.
Just a bit of advise, a tack clothe works better when it’s fully opened and then lightly balled up, helps activate the adhesive in it. Also when sanding with high grit paper you should use wet, avoids the paper clogging up and causing pig tail scratches in your finish which can show up after polishing since it’s basically gouging into your topcoat.
As a fan of simple tools that make life easier, I think you would benefit from a few different sizes of 'notched' adhesive spreaders, for your gel coat. The notches are small and when the correct size is selected, it'll let you spread the gelcoat around a large area while leaving the right amount behind. This'll let you get the coating over the whole area quicker and prevent extra work needed to fix thin/thick pots.
Honestly what I'm impressed with the most is your ability to not have a gigantic mess, the few times I've delved into composites yielded good results but awful messes hahaha
I think you could make this a lot easier if you wetted the carbon fiber all the way through at first and then used a perforated film with a breather layer under vacuum to get all the excess resin out. Then just quick sanding and you got a nice even surface without these darker spots
it was amazing. i worked with epoxy resin for about 2 years and i always wanted to use carbon fiber in my projects. with watching this video, i am going to do it. thanks for sharing the video. just need to know about the epoxy you used on the pallet, can i use ordinary resin instead or it is special?
Too many people try the AvE editing method these days and just don't accomplish the humor he has with out being funny. That said, thanks for taking the time to film edit and upload this.
I really like your simple videos, no narration or music. Next time you want a mirror finish on a flat surface just use glass and then bond your laminate to the MDF board.
Or do as you say and lay up on the glass, then add the baseboard and wrap the carbon around it... It's how I would do it, and would use a clear gelcoat or initial layer of epoxy with lightweight glassfibre before laying in the carbon.
You should never have used gelcoat, instead a thin layer of epoxy to establish the wood surface. Once cured you then place the carbon cloth wet and align the weave.
Sei un genio !!!! Volevo un consiglio devo fare delle parti di carbonio alla mia Maserati ma vorrei mettere sotto la pellicola carbonio e sopra la resina che ne dici ? Potrebbe resistere?
Hi, buddy! th-cam.com/video/OrcN5b62mF4/w-d-xo.html Please watch this video. This url is working on carbon fiber interior. In carbon skinning, it is very important to apply epoxy resin and leveling the surface. You have to apply epoxy resin many times. When leveling the surface, be careful not to damage the carbon fiber cloth. I hope you can make a good carbon fiber parts. If you have question, please reply. Thank you for watching. ^^
드디어한국에도 이렇게 영상올리시는분이 나오네요 저는 대농인프라 김준석 상임연구원이고 탄소섬유대량생산 신기술 및 특수용액으로 코팅제 개발하여 우레탄 및 어떤 도색을해도 핀홀이 하나도없게 제작이 가능합니다 ㅎㅎ 저도 처음에 클리어코트 열나게 3번씩 갈아내고 핀홀잡았던 기억이나네요 ㅎㅎ
@@ECOLAPStudio 저희는 대기업 및 한국탄소융합기술원 같이 대량생산이 필요한 곳에 맞춰 연구하다보니 개발이 완료되었습니다 ㅎㅎ 또한 아시다시피 클리어 코팅 수지로 코팅하시면 광택도 광택이지만 작업이 한번에 끝나는 것이 아닌 황변이 너무 심하며 충격에 왔을때 크랙이 온다는 점이 문제점입니다. 우레탄 클리어는 uv차단효과와 황변억제가 되어있으며 깨지지않는다는 장점이 있죠 ㅎㅎ 아시다시피 우레탄 도색을 올리고 싶어도 올리기 어려운게 현상황입니다. 그러다보니 3년동안 연구해서 도막을 형성해주는 특수 물질을 개발하였고 아마 우레탄 도색과 같은 클리어 페인트로 마감 되신다면 굉장히 편한 작업성을 느끼실 겁니다 ㅎㅎ 아직판매는 안하고있구요 저도 유튜버님처럼 열정을 가지고 탄소섬유 제작하시는 분들을 응원해드리고 싶습니다 ㅎㅎ xlfkshek1004@naver.com으로 연락주시면 재밌는 이야기 많이 나눠볼 수 있을 것 같습니다
Hello, Buddy! If you have epoxy resin and gel coat, it doesn't cost much. Carbon fiber and MDF plates cost approximately $ 100 or less. I hope you helpful.
Great channel, just subscribed. I understand that you had too much gelcoat the first time. But why did you even bother putting on gelcoat? Couldn't you just have put epoxy resin on top?
Hello, Buddy! It could also work with epoxy resin. However, it is recommended to use a gelcoat. There are several reasons to use a gelcoat. First, the gel coat is very viscous and does not flow down. And, the base color of the parts can be covered with black epoxy gelcoat. I hope you helpful. Thank you for watching.
Knudsen Allan yes your right, it’s cheaper just to make your own “Gel Coat” or thicker resin. He could’ve added black pigment to the resin. And to thicken it a bit also he could’ve added glass microspheres to it. It’s pretty much the same instead of spending extra money surface coat
Nice work I love the videos keep up the good work. If I was to make the same thing I would do one the methods some the companies use to make flat sheats and use a sheet of glass or 2 to keep it truly flat and no MDF so it's just carbon. And use carbon tubes for the legs and or aluminum.
@@drumbum7999 I'm with embino, and I do have an idea of how composite objects are made. At first I thought he was running a very thin piece as a core, but this is more of a laminate that is true carbon fiber. Or that he was using that piece to create a mold. I'm not disappointed, it is a nice looking table, but you get all of the cool looks of carbon fiber but without the lightweight benefits of carbon fiber. Granted he didn't have to lay multiple layers, add in core material, create support structures and bracing, so from a time and cost perspective, it was the best route.
Best Kiteboarding Official why in the world would you need any of that stuff just to do an overlay? He started out ok until he put that bag over it to try and compress it, definitely didn’t need the bag.
I have a couple questions you gave me the idea to a flat door panel and I am thinking of using you method since is practically all I need to do is use this same format. What kind of gel coat is that.
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/
Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html
Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best
Hello, Buddy! When working on carbon fiber, the smell of epoxy resin is always a concern. I'm making carbon fiber at home. I care about ventilation. After using the epoxy resin, be sure to open the windows and ventilate. It is best to open the windows because there is no ventilation system. and If you let me know your email, I will send the canard file to you. Thank you for watching.
Sure that theirs things for everybody’s tastes, but I find the look of natural carbon fibres with gloss absolutely WOW, but the cost is so high, you really have to be a maniacs of it, my sportbike is full of it, I even got some parts in my s.u.v., might say I’m an addict 😂😂😂😍👍
Hello, Buddy! I do not reuse brushes. I buy and use several cheap brushes (approximately 5 cents). If you want to reuse the brush, you can wash it with acetone. However, it cannot be reused much.
Hello, Buddy! Small parts are top-coated and covered with a box. However, for larger parts, apply several top coats and polish after leveling. Large parts are difficult to avoid dust.
You don’t. For large items if you’re doing this at home you take 1000 grit to remove dust nibs just as you would if you’re painting a car in your garage dust and bugs will typically land on the clear coat while it dries
I would make it other way. Take a glass as a base. Lay epoxy, then carbon. Use roller to remove bubbles. Then put board on top and vacuum it. You should get nice clean surface.
Hello, Buddy! I am using several epoxy resins. Epoxy gel coat, laminating epoxy resin, and top coat epoxy resin were used. The epoxy resin used varies depending on the composition.
If you were to make a 3/4" thick table of carbon fiber it would cost about 2000 usd... the skin is very thin, and decorative, not able to hold any additional weight... probably 250gm/m2 carbon and likely cost him about a hundred dollars us to make a a skin...
![How to Make a Forged Carbon Fiber Table Top [DIY] (Forged Carbon Fiber Skinning)](http://i.ytimg.com/vi/D8ywlhSQ2cM/mqdefault.jpg)
![How to Make a Forged Carbon Fiber Table Top [DIY] (Forged Carbon Fiber Skinning)](/img/tr.png)
![Carbon Fiber Plate with Epoxy Resin [DIY]](http://i.ytimg.com/vi/ri1JnCoswOE/mqdefault.jpg)
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
I appreciate showing the fail and what contributing factors there may have been. Too many people don't appreciate that failure is part of success. Particularly during the learning process. Good job.
Just a bit of advise, a tack clothe works better when it’s fully opened and then lightly balled up, helps activate the adhesive in it. Also when sanding with high grit paper you should use wet, avoids the paper clogging up and causing pig tail scratches in your finish which can show up after polishing since it’s basically gouging into your topcoat.
As a fan of simple tools that make life easier, I think you would benefit from a few different sizes of 'notched' adhesive spreaders, for your gel coat. The notches are small and when the correct size is selected, it'll let you spread the gelcoat around a large area while leaving the right amount behind. This'll let you get the coating over the whole area quicker and prevent extra work needed to fix thin/thick pots.
Honestly what I'm impressed with the most is your ability to not have a gigantic mess, the few times I've delved into composites yielded good results but awful messes hahaha
I think you could make this a lot easier if you wetted the carbon fiber all the way through at first and then used a perforated film with a breather layer under vacuum to get all the excess resin out. Then just quick sanding and you got a nice even surface without these darker spots
it was amazing.
i worked with epoxy resin for about 2 years and i always wanted to use carbon fiber in my projects. with watching this video, i am going to do it. thanks for sharing the video.
just need to know about the epoxy you used on the pallet, can i use ordinary resin instead or it is special?
Too many people try the AvE editing method these days and just don't accomplish the humor he has with out being funny. That said, thanks for taking the time to film edit and upload this.
Please, we need a video tutorial on how to make a carbon fiber car steering wheel. There is none on the internet
If I get a chance, I'll make it.
Thank you for the good idea.
and Thank you for watching. ^^
this guy has no clue how to make carbon fiber parts and you want a steering wheel..
Good luck..
@@ECOLAPStudio dove posso trovare quei sacchetti per mettere sotto vuoto? Grazie
Nabi, what do you mean?
There is one on TH-cam if you look
This shit is relaxing..with me being quarantined inside the house i might start carbon fiber everything now
I really like your simple videos, no narration or music. Next time you want a mirror finish on a flat surface just use glass and then bond your laminate to the MDF board.
Or do as you say and lay up on the glass, then add the baseboard and wrap the carbon around it... It's how I would do it, and would use a clear gelcoat or initial layer of epoxy with lightweight glassfibre before laying in the carbon.
Change the color of your car with carbon without dyeing
th-cam.com/video/aL5hFhQ6Dqk/w-d-xo.html
Boy, IKEA is really making their table’s assembly complicated now.
At least you'll have the trusty IKEA man to pictographically guide you through the process.
指先が…
いろいろと物語るところが、
すばらしい！
Feel very satisfied watching the end of video 😆😆😆
You need to apply ppf on it to protect against scratches ;D
What's ppf? Thanks inadvance👍
You should never have used gelcoat, instead a thin layer of epoxy to establish the wood surface. Once cured you then place the carbon cloth wet and align the weave.
Paint the board black then let set. Then use clear epoxy to adhere and cover the CF cloth. Then you have no black bleed through visible
Change the color of your car with carbon without dyeing
th-cam.com/video/aL5hFhQ6Dqk/w-d-xo.html
this feels like it's trying to give off the vibes of that one knife making channel, and i have to admit it does it quite well
새로운 취미를 찾던 도중에 카본diy를 보고 있었는데 넘나 잘봤습니다~~~~~
Good God that first sanding bit gave me the goosebumps lol
Shows in detail how to fail, speeds up 1000x how not to fail
You learn more from mistakes. My problem was the slow motion baby wipe dispensing.
I love carbon fiber parts 😍😍
Sei un genio !!!! Volevo un consiglio devo fare delle parti di carbonio alla mia Maserati ma vorrei mettere sotto la pellicola carbonio e sopra la resina che ne dici ? Potrebbe resistere?
Hi, buddy!
th-cam.com/video/OrcN5b62mF4/w-d-xo.html
Please watch this video. This url is working on carbon fiber interior.
In carbon skinning, it is very important to apply epoxy resin and leveling the surface.
You have to apply epoxy resin many times.
When leveling the surface, be careful not to damage the carbon fiber cloth.
I hope you can make a good carbon fiber parts.
If you have question, please reply.
Thank you for watching. ^^
Love all the videos man 🤙
Hello, Buddy!
Thank you for your comment.
I will make more interesting and informative videos, so stay tuned to my channel.
Thank you for watching.
This dude is carbon God😆🔥
Love it, it must be super light also.
Not really because it's just made of wood. The carbon is just for looks
From France..Respect !!!
これは満足感高いですね。カーボン好きにはたまらないアイテムですね。
Change the color of your car with carbon without dyeing.
th-cam.com/video/aL5hFhQ6Dqk/w-d-xo.html
드디어한국에도 이렇게 영상올리시는분이 나오네요
저는 대농인프라 김준석 상임연구원이고
탄소섬유대량생산 신기술 및 특수용액으로 코팅제 개발하여 우레탄 및 어떤 도색을해도 핀홀이 하나도없게 제작이 가능합니다 ㅎㅎ 저도 처음에 클리어코트 열나게 3번씩 갈아내고 핀홀잡았던 기억이나네요 ㅎㅎ
안녕하세요!
마무리를 할 때 최대한 깨끗한 면을 만들기 위해서 노력하지만 완벽한 마무리를 위해서는 어쩔 수 없이 샌딩과 폴리싱을 할 수밖에는 없었는데 핀홀이 없이 가능하다니 매우 흥미롭고 놀랍네요.
피니시용 코팅제를 별도로 판매도 하시는 건가요?
@@ECOLAPStudio 저희는 대기업 및 한국탄소융합기술원 같이 대량생산이 필요한 곳에 맞춰 연구하다보니 개발이 완료되었습니다 ㅎㅎ 또한 아시다시피 클리어 코팅 수지로 코팅하시면 광택도 광택이지만 작업이 한번에 끝나는 것이 아닌 황변이 너무 심하며 충격에 왔을때 크랙이 온다는 점이 문제점입니다. 우레탄 클리어는 uv차단효과와 황변억제가 되어있으며 깨지지않는다는 장점이 있죠 ㅎㅎ 아시다시피 우레탄 도색을 올리고 싶어도 올리기 어려운게 현상황입니다.
그러다보니 3년동안 연구해서 도막을 형성해주는 특수 물질을 개발하였고 아마 우레탄 도색과 같은 클리어 페인트로 마감 되신다면 굉장히 편한 작업성을 느끼실 겁니다 ㅎㅎ 아직판매는 안하고있구요 저도 유튜버님처럼 열정을 가지고 탄소섬유 제작하시는 분들을 응원해드리고 싶습니다 ㅎㅎ xlfkshek1004@naver.com으로 연락주시면 재밌는 이야기 많이 나눠볼 수 있을 것 같습니다
I would like this man do my car all carbon fibre 👍👍
I miss Korea, thanks for the vids!!
Have you ever reshaped a steering wheel, making it flat bottom?
Hello, Buddy!
I'm sorry I don't speak English well so I don't know if I understood it well.
The floor surface is not flat.
It has a finger grip.
ECO-LAP Studio he means making steering wheel shaped just like D
Great video
영상만 보고 해외분인지 알았네요.^^; 금손이십니다. 질문이 있는데 에폭시 경화 후에 집안에서 쓰기에 독성이 있지 않나요? 경화 돼도 냄새는 많이 나더라구요. 그리고 기포 제거 하실 때 반 경화 상태에서 하신건가요?
The sound gesek gesek is very ngeress. Hatiku merinding gaes..
And a Legend was born.
nice table
Fantastic Channel!
That thing is gonna show every finger print ever
Great job!!! 🙌🏽
I'm going to try some this week. So this is called skinning? How much is the cut of carbon fiber? I'm in the USA
Very nice, what is the approximate material cost?
Hello, Buddy!
If you have epoxy resin and gel coat, it doesn't cost much.
Carbon fiber and MDF plates cost approximately $ 100 or less.
I hope you helpful.
@@ECOLAPStudio Awesome, really enjoy your videos, keep up the good work!
@@TheFlyingPLiner Thank you.
I will make fun and informative videos.
Please, look forward to next video.
Thank you for watching.
Love your videos bro. You have a funny sense of humor as well lol. We want to see more projects lol😂
Great channel, just subscribed. I understand that you had too much gelcoat the first time. But why did you even bother putting on gelcoat? Couldn't you just have put epoxy resin on top?
Hello, Buddy!
It could also work with epoxy resin.
However, it is recommended to use a gelcoat.
There are several reasons to use a gelcoat.
First, the gel coat is very viscous and does not flow down.
And, the base color of the parts can be covered with black epoxy gelcoat.
I hope you helpful.
Thank you for watching.
Knudsen Allan yes your right, it’s cheaper just to make your own “Gel Coat” or thicker resin. He could’ve added black pigment to the resin. And to thicken it a bit also he could’ve added glass microspheres to it. It’s pretty much the same instead of spending extra money surface coat
진짜 카본 테이블 만들어보고 싶었는데.. 여기에 있다니
시간되시면 재료등은 어디서 구입했는지 알려주세요..
그리고 재료측량하실때 .. 저도 참고 하고싶은데 무게측정하는 부분에서 그냥 넘어가서 ... 배합비율등이 궁금합니다.
영상 잘 봤습니다
What you put in the table in first place, the black thing
Nice work I love the videos keep up the good work.
If I was to make the same thing I would do one the methods some the companies use to make flat sheats and use a sheet of glass or 2 to keep it truly flat and no MDF so it's just carbon.
And use carbon tubes for the legs and or aluminum.
Wow, beautiful work!
Good job !
Nice job
Well, technically it's carbon skinning but still super cool.
I dunno what im doing here
Do you discard the brush or any other materials that you used after the project?
브러쉬는 보통 한번 사용하고 버립니다.
그렇지 때문에 비싼 브러쉬를 사용하지 않고 저렴한 브러쉬를 50~100개씩 구입해서 사용하고 있습니다.
에폭시 레진을 바를 때 사용하는 브러쉬는 솔이 너무 강하지 않은 것을 사용하는 것이 작업성이 좋습니다.
What a cool channel, keep it up👍🏼
Hello, Buddy!
Thank you for watching.
I will make fun and informative videos.
Please lookfoward to next video.
Thank you.
아니 형 못하는게 뭐야?!!!!
I always wondered, how do you learn to manipulate carbon fiber and where do you buy your stuff lol
미국에서 잘보고 있어요. 배우고 싶네요... 코로나때문에 집에만 있으니 죽겠습니다
진짜 금손이 여기있으셨네요!
감사합니다!
아직 혼자 이것저것 시도해보고 공부하고 있습니다.
아직 많이 부족하지만 지켜봐주세요!
시청해주셔서 감사합니다.
7:31 where do you buy the pump
This was a carbon-fiber wrapped table; not really a carbon fiber table.
Good job man. Thanks
Hello, Buddy!
Thanks for the compliment ~
I will make more interesting and informative videos, so stay tuned to my channel.
Thank you for watching.
That looks great, thanks for sharing
Well I was expecting a carbon fiber table, not fibreboard wrapped with carbon fibre sheet....
that's because you don't understand how composite objects are made or at least you didn't
@@drumbum7999 I'm with embino, and I do have an idea of how composite objects are made. At first I thought he was running a very thin piece as a core, but this is more of a laminate that is true carbon fiber. Or that he was using that piece to create a mold. I'm not disappointed, it is a nice looking table, but you get all of the cool looks of carbon fiber but without the lightweight benefits of carbon fiber. Granted he didn't have to lay multiple layers, add in core material, create support structures and bracing, so from a time and cost perspective, it was the best route.
Reason for failure, no peel ply or breather absorber and not enough squeeze to even out the resin.
Best Kiteboarding Official why in the world would you need any of that stuff just to do an overlay? He started out ok until he put that bag over it to try and compress it, definitely didn’t need the bag.
Hi, what brand
of bag kit use for the vacuum ?
ASMR for carbon fiber lovers 😆
🤚🏽here
amazing table !!!
Geile Arbeit👍👍👍👍👌👌👌👌👌👌
이정도면 변기 카바도 카본으로 만드실분이라는걸 잘 알갰습니다
ㅎㅎㅎ
I just built my own carbon fiber table. Do you have issues with it scratching and if so, how do you prevent them or remove them?
I have a couple questions you gave me the idea to a flat door panel and I am thinking of using you method since is practically all I need to do is use this same format. What kind of gel coat is that.
What kind of pump are you using? I want one!!
Hello, Buddy!
I used vacuum bags and pump for clothing and food.
It will be available to you too.
@@ECOLAPStudio oh.. I thought your vacuum pump is for carbon specific only. Haha. Nice hack. Thank you for sharing!!
Dick pump
Ciao, sei un artista 😍dove posso comprare tutto l occorrente per realizzare questi lavori, c’è un sito italiano specializzato ? Grazie in anticipo
Strongem è coreano, quindi non penso possa risponderti. Guarda sui siti inglesi, di solito loro hanno siti più completi e spesso con prezzi migliori.
Klent Wanties ah grazie mille, i titoli li visualizzavo in italiano 😢🤣, comunque grazie spresti elencarmi qualche sito per favore ? Grazie mille 😊
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
www.easycomposites.co.uk/
Very nice
0:20 so you usually sit on the roof of your car to eat some snacks?
Hello, Buddy!
Sometimes the wing can be used as a coffee table. ^^
@@ECOLAPStudio S2000?
@@karson1214 looks like an M3
Was it different type of epoxy when apply for top coat? Or same thing as normal one?
탑코트에 사용된 에폭시 레진은 마무리용 탑코트 에폭시 레진으로 고광택 클리어 에폭시 레진입니다. ^^
Sir can u list these items
Also plz can u share the epoxy mixing
Hello, Buddy!
I purchased materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html
Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html
top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html
carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html
대단하세요 ~♡
저~~질문좀 드리겠습니다.
첫번째 실패 원인은 무엇일까요 ~?
안녕하세요.
지나치게 많은 에폭시 겔코트의 양과 경화시간을 너무 짧게 가져가서 겔코트가 카본 원단 사이로 삐져나왔습니다.
그래서 겔코트 얼룩이 심하게 남게 되었습니다.
@@ECOLAPStudio 답변 주셔서 감사합니다.
좋은 하루 되세요 ~
Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best
how do you deal with the smell ? looks like you do this at home.
Hello, Buddy!
When working on carbon fiber, the smell of epoxy resin is always a concern.
I'm making carbon fiber at home. I care about ventilation.
After using the epoxy resin, be sure to open the windows and ventilate.
It is best to open the windows because there is no ventilation system.
and If you let me know your email, I will send the canard file to you.
Thank you for watching.
amazing carbon fiber 😍
Thank you so much~
Sure that theirs things for everybody’s tastes, but I find the look of natural carbon fibres with gloss absolutely WOW, but the cost is so high, you really have to be a maniacs of it, my sportbike is full of it, I even got some parts in my s.u.v., might say I’m an addict 😂😂😂😍👍
Change the color of your car with carbon without dyeing
th-cam.com/video/aL5hFhQ6Dqk/w-d-xo.html
You are the best ♠️
Hello, Buddy!
Thank you so much.
Please look forward to next video.
I will make fun and informative video.
Thanks for watching.
I would like to know.. how we want to take care the brush after use the epoxy... Because if just wash.. it will be harden
Hello, Buddy!
I do not reuse brushes.
I buy and use several cheap brushes (approximately 5 cents).
If you want to reuse the brush, you can wash it with acetone.
However, it cannot be reused much.
5:17 so satisfying 😅
잘보고갑니다!ㅋ 집에서 작업하시는거에요!?
안녕하세요!
네 집에서 퇴근 후에 조금씩 작업하고 있습니다.
집에해서 하다보니 어려움이 좀 있지만 이것저것 많이 시도해보려고 합니다.
시청해주셔서 감사합니다.
ウチのボロテーブルにもカーボン貼ってみようかな〜
うまくできるかは分かりませんけど
Do you mind showing us how to do an interior carbon fiber trim ?
Change the color of your car with carbon without dyeing
th-cam.com/video/aL5hFhQ6Dqk/w-d-xo.html
wow nice.
Maybe paint the board black then let set. Then use clear epoxy to adhere and cover the CF cloth. Then you have no black bleed through visible.
장인정신.... 멋지세요
최정혁 카본장인이 되어보겠습니다!
How do you keep it dust free when top layer resin is drying?
Hello, Buddy!
Small parts are top-coated and covered with a box.
However, for larger parts, apply several top coats and polish after leveling.
Large parts are difficult to avoid dust.
You don’t. For large items if you’re doing this at home you take 1000 grit to remove dust nibs just as you would if you’re painting a car in your garage dust and bugs will typically land on the clear coat while it dries
실패시의 손연기가 약했던거 말곤 정말 시간가는줄 모르고 봤네요 ㅋㅋ
안녕하세요~
즐겁게 봐주셔서 감사합니다^^
아직 여러면에 많이 부족합니다.
더 열심히 노력해서 더 재미있고 유익한 영상을 만들테니 기대주세요~
잘만드시내요😄👍👍👍
Impressive, the polishing could have been better but i digress.
Change the color of your car with carbon without dyeing
th-cam.com/video/aL5hFhQ6Dqk/w-d-xo.html
Didn't know I was watching a asmr video lol
I actually fall asleep while watching it
😂😂📺😴
😂🤣😂🤣
I would make it other way. Take a glass as a base. Lay epoxy, then carbon. Use roller to remove bubbles. Then put board on top and vacuum it. You should get nice clean surface.
안녕하세요 !! 손기술이
너무 좋으시네요 가까운 곳이면 직접 뵙고 한번 배워보고싶습니다 ㅠㅠ
Why did you add heat to the top coat on this one but not the steering wheel or shifter?
Can we do this without the vacuum seal bag?
손연기가 대상감입니다 ㅎㅎ
손놀림에서 빵빵 터지고 갑니다
+Hosik Yoon 재미있게 봐주셔서 감사합니다!!
더 재미있는 영상 만들 수 있도록 노력하겠습니다~^^
Are you guys using different resins fir every steps
Hello, Buddy!
I am using several epoxy resins.
Epoxy gel coat, laminating epoxy resin, and top coat epoxy resin were used.
The epoxy resin used varies depending on the composition.
Why didn't he removed the plywood?
MDF
If you were to make a 3/4" thick table of carbon fiber it would cost about 2000 usd... the skin is very thin, and decorative, not able to hold any additional weight... probably 250gm/m2 carbon and likely cost him about a hundred dollars us to make a a skin...
what was the second polishing attachment he put after the first one? The red color one.