Hello, Buddy! That's right. Making carbon fiber parts takes a lot of time and devotion. And it is a difficult task. However, I want to share the knowledge I know with people. Thank you for watching.
Hello, Buddy! Thanks for the compliment. I'm using several methods to get rid of air bubbles. Using hot water is very simple and easy. We also use gas torch and heating gun. Thank you for watching.
Loving the videos so much that it’s inspired me to try it out! Could you please include the exact ingredients and amount used with each step in the description in future videos?
Hello, Buddy! The mixing ratio of epoxy resin varies depending on the manufacturer and product. I will try to add more details in the other parts. Thank you for watching.
4 ปีที่แล้ว
Thank you. X5 owner, have lacked courage, now I'll try it.
Wow...real carbon fiber...not that plastic stuff.... impressed. Bet that will last. How well does it survive in a hot environment. My plastic over wood melted in Arizona...sadly it would be too difficult for me to use this method to fix my situation.
Hello, Buddy! Thank you so much!! It's okay if my channel isn't a million subscribers. I just want to share fun and information with many people. Please, Look forward to the next video. Thanks for watching.
Hi, great video! I wanted to know if theres any difference between Epoxy Gelcoat that you use and Epoxy basecoat. Or are they the same things with different names?
Another amazing job! I see on your video you leave the carbon fibre 'hanging' over the edges of the trim piece and then cut the excess off with a knife whereas on other videos I have seen they tuck the cloth underneath the trim piece and tape it and then cut it off with a knife or Dremel like tool. Which way is easier or better?
Hello, Buddy! I use both knives and dremel depending on the situation. I usually use knives and Dremel for those that cannot be cut with a knife. I hope you helpful.
olá, muito legal seu trabalho, parabéns! só gostaria de saber , qual é o material que vc utilizou na primeira camada ,antes de colocar o tecido carbono . vi que ele tem a cor aparentemente preto ? E faz com que, o tecido carbono adere com facilidade. agradeço, caso vc possa me dizer.! abraço!
Loving your work buddy! Learning few tricks here and there. Gonna do one tomorrow. Hope everything goes well. Anyway, just wondering how do you clean/wash the brushes from epoxy resin & hardener? Care to share?
Olá moro aqui no Brasil, e queria revestir o acabamento central do painel do meu carro de carbono,e procurei vários tutoriais até chegar no seus vídeos,em fim notei que você sempre usa pra um ótimo acabamento da fibra na peça o gel coat epóxi o preto que você passa e aguarda até que ele fique pregando certo? Procurei aqui no Brasil em várias lojas mas não tem o produto! Você me indicaria qual pra usar no lugar dele pra que o substituísse?
How essential is the gel coat to your projects? Can it be skipped most of the time, or maybe use resin instead? Do you ever bake your carbon or just let it dry at room temp. Do you clear coat the parts or always use uv resin as top layer?
Hello, Buddy~ The gelcoat is very important in carbon fiber skinning. In carbon fiber skinning, It can attachment replace to epoxy resins or spray adhesives. But, The black gelcoat can cover the surface of the parts in black. If the base color of the parts is not black or darkness color, the base color may look fine after carbon fiber skinning. Also, the gelcoat is very strong. The finish of the surface uses epoxy resin topcoat or clear car spray. I think the best surface finish is the epoxy resin topcoat. Because epoxy resins make a stronger surface than clear sprays. I hope you helpful.
+Ahmed Sebaei Hello buddy!! Thank you for watching! I hope you watch other videos on the channel. And I'll make a good video so look forward to it! Thank you!!
+Ahmed Sebaei I am using a gelcoat resoltech product Epoxy resins are produced in Korea. I can tell you about the UK website because what is sold in Korea cannot be shipped overseas. Maybe you can find what you want. www.easycomposites.co.uk/
Very good video. I want to know the brand of the resin and epoxy you're using. I want to order them and try out sometime. If you dont mind to link all the materials that you are using. Thanks
Hello, Buddy! I'm buying the materials from online shop in Korea. However, Korean online shops do not ship overseas. So I introduce you UK online shop. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk/
Hello, Buddy! When skinning carbon fiber, it is important to scratch the surface of the plastic parts by using very rough sandpaper. The gel coat is absorbed by the strong scratches and helps to firmly attach the carbon fiber cloth.
@@ECOLAPStudio hi,I recommend that the surface needs sandblasting at least ,Because the black glue is difficult to adhere at the chrome surface。 Sanding with sandpaper does‘t achieve sufficient roughness
I saw your video, but you only said the material you used, but not the brand so I can see if I have the same or similar in my region... can you tell me? I'll have to make one, because Chevrolet doesn't just sell the Shift Knob? Chevrolet is forcing you to sell the complete automatic transmission.
Hello, Buddy! The skinning of small parts is also not very different. I think trimming is an important part of skinning small parts. If I get a chance, I'll make a video. Thank you for watching.
I am looking forward to the next video! I already purchased the cheap vacuum bags and pump to do my project on my motorcycles. Your videos gave me lots of ideas to do a good job on the budget! Have you ever done a dry infusion with the equipment you use in the videos? That would be an awesome experiment!
I didn't work on infusion. Of course I want to do Infusion. But I work at home (apartment), so I'm a little worried about the noise of the vacuum pump. So I'm thinking about Infusion. I'll try it if I get a chance! I will give you another good idea! Thanks you.
Great Videos! Apreciate that you dont use stupid music :) Another question. My BMW M2 has this raw Carbon Fiber. How do I skin this? Just step 1 after gel coat, but what about the edges? They will come lose and dont be smooth.
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/
Zzafari7 I can’t seem to get the black piece with the R,N, D, d/s off the top of the shifter. The video made it look so easy with a screwdriver but I can’t manage to pry it off. 😅
Hello, Buddy! I am not a carbon fiber seller. I study carbon fiber myself and do various tests. My knowledge may not be perfect, but I would like to share my knowledge with many people.
Hello, Buddy! When skinning, carbon fiber uses one layer. It is very thin and is approximately 0.3-0.5 mm thick. It's just skinning, so it doesn't care about thickness, weight, and stiffness.
Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.
Hello, Buddy! My car has installed Varis diffuser and BMW M Performance diffuser. Varis diffuser is tough design. I hope you helpful. Thank you for watching.
+Christian Perles The varis made in Taiwan. I got via Korean importer. I think you can find out on ebay or aliexpress. But I'm not sure that's quality.
The carbon has thousands of fibers that catch light from different angles, vinyl will never be able to reproduce that... sure you can epoxy over vinyl to get the thickness and smoothness, but the light will show the difference... and if you are going to epoxy over vinyl, why not just use carbon, you can practice with regular fiberglass to learn techniques if you feel the real carbon is too expensive. Of course you can just use carbon vinyl wrap and know that it's not real carbon.
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/
Hello, Buddy! A new epoxy resin should be mixed every 2-3 hours. The gear knob and the gear plate did not have many curved surfaces, so it was possible without a vacuum bag. I also wanted to make trimming easier. For parts with many curved surfaces, it is recommended to attach a carbon fiber cloth using a vacuum bag.
@@ECOLAPStudio when do i use the vacuum bag...in what step exactly ? Do you use sandpaper between every epoxy resin painting, or only first time and then just paint and paint....Happy eastern
![How to Simply Change your Car Parts to Real Carbon Fiber (Carbon fiber Skinning) [DIY]](http://i.ytimg.com/vi/zKGwHYBcs-U/mqdefault.jpg)
![How to Simply Change your Car Parts to Real Carbon Fiber (Carbon fiber Skinning) [DIY]](/img/tr.png)
![How to Bake Prepreg Carbon Fiber Brake Cooling Ducts in an Oven [DIY]](http://i.ytimg.com/vi/d3SY8l3jbTo/mqdefault.jpg)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](http://i.ytimg.com/vi/YNWu1-r5HGo/mqdefault.jpg)
This guy has made a very hard task look easy. Dont be fooled, its really hard. Thumbs up.
Hello, Buddy!
That's right.
Making carbon fiber parts takes a lot of time and devotion.
And it is a difficult task.
However, I want to share the knowledge I know with people.
Thank you for watching.
good idea to remove air bubbles i usually warm up the epoxy before mix, but this is great too!
Hello, Buddy!
Thanks for the compliment.
I'm using several methods to get rid of air bubbles.
Using hot water is very simple and easy.
We also use gas torch and heating gun.
Thank you for watching.
Loving the videos so much that it’s inspired me to try it out!
Could you please include the exact ingredients and amount used with each step in the description in future videos?
Hello, Buddy!
The mixing ratio of epoxy resin varies depending on the manufacturer and product.
I will try to add more details in the other parts.
Thank you for watching.
Thank you. X5 owner, have lacked courage, now I'll try it.
I feel like this is the knife making guy, who just got really rich from the knife making videos, and now he turns everything to carbon
Wish it was me
Same, thought it was him but seems this guy just copies his style
What’s this knife making guys TH-cam channel??
My mate done this on a few old mini parts and it shocked me. Top job and balls being fairly new car👌
Wow...real carbon fiber...not that plastic stuff.... impressed. Bet that will last. How well does it survive in a hot environment. My plastic over wood melted in Arizona...sadly it would be too difficult for me to use this method to fix my situation.
That hot water trick is great!
Fantastico, bravo quando hai scartavetrato il pomello e il supporto del cambio però stavo male bel lavoro Complimenti
Hello, Buddy!
Thank you so much.
I'm will make a fun and informative video.
Stay tuned to my channel.
Thank you for watching.
@@ECOLAPStudio absolutely, for my rc plane and Alfa 156 😁😁🏋🏋🏋💪💪
Great video! Really inspired me to do some carbon skinning too, thank you very much!
You should put everything used in the description
Dude hell yeah!! Keep up the good work , you’ll be at a million followers in no time !!
Hello, Buddy!
Thank you so much!!
It's okay if my channel isn't a million subscribers.
I just want to share fun and information with many people.
Please, Look forward to the next video.
Thanks for watching.
you are the real diy BOSS
かっこいい！日本からのコメントでした！
It was a cool comment from Japan!
Outstanding job my friend. I've been watching a lot of your videos and you do such a great job all the time.
I wonder if anyone ever gave it a go after watching this video? Nice work mate btw!
대단하시네요. 기계 공구도 없이 수작업으로만 저런 퀄리티가 나온다니...
카본 원단자체가 워낙 비싸다고 들었는데...
It’s actually not really expensive, prices are between 25-50$ per yard
Real Man Used Carbon 👍🔥🔥
M’ha encantat aquest vídeo, molt ben fet i a l’hora divertit. Felicitats
와 진짜 멋져요.. 다이 끝판왕이네요
So, do you ever have that moment before you start sanding the original BMW covers, where you stop and question if you want to continue?
Hi, great video! I wanted to know if theres any difference between Epoxy Gelcoat that you use and Epoxy basecoat. Or are they the same things with different names?
E hecho mis propias piezas con fibra de carbono
Gracias a tus vídeos
Saludos desde México
Deberías hacer video para un difusor o alerón amigo
Another amazing job! I see on your video you leave the carbon fibre 'hanging' over the edges of the trim piece and then cut the excess off with a knife whereas on other videos I have seen they tuck the cloth underneath the trim piece and tape it and then cut it off with a knife or Dremel like tool. Which way is easier or better?
Hello, Buddy!
I use both knives and dremel depending on the situation.
I usually use knives and Dremel for those that cannot be cut with a knife.
I hope you helpful.
olá, muito legal seu trabalho, parabéns!
só gostaria de saber , qual é o material que vc utilizou na primeira camada ,antes de colocar o tecido carbono . vi que ele tem
a cor aparentemente preto ?
E faz com que, o tecido carbono adere com facilidade.
agradeço, caso vc possa me dizer.!
abraço!
Loving your work buddy! Learning few tricks here and there. Gonna do one tomorrow. Hope everything goes well. Anyway, just wondering how do you clean/wash the brushes from epoxy resin & hardener? Care to share?
Hello!
From Brazil
I like see your videos, your style that make videos.
Bel lavoro complimenti.
재료 한글로 좀 부탁드립니다 ㅎㅎ
주말에 밖에도 못 나가는데..
이것나 한번해봐야겠네요 ㅎㅎ..
맨날 시트지만 했는데 ㅋㅋ
신세계입니다^^
Wow It’s really nice
Olá moro aqui no Brasil, e queria revestir o acabamento central do painel do meu carro de carbono,e procurei vários tutoriais até chegar no seus vídeos,em fim notei que você sempre usa pra um ótimo acabamento da fibra na peça o gel coat epóxi o preto que você passa e aguarda até que ele fique pregando certo? Procurei aqui no Brasil em várias lojas mas não tem o produto! Você me indicaria qual pra usar no lugar dele pra que o substituísse?
Hi Mate, Looks very smart & professionally done! Cant you tell me the name on the song at the start..? I seem to recognise it from somewhere, Cheers!!
Ouch, sanding bavarias finest vacuum metalised parts. Worth it though as it looks great at the end. Good job mate.
You Are un artist !
Woww...very nice and beautiful..
How essential is the gel coat to your projects? Can it be skipped most of the time, or maybe use resin instead?
Do you ever bake your carbon or just let it dry at room temp.
Do you clear coat the parts or always use uv resin as top layer?
Hello, Buddy~
The gelcoat is very important in carbon fiber skinning.
In carbon fiber skinning, It can attachment replace to epoxy resins or spray adhesives.
But, The black gelcoat can cover the surface of the parts in black.
If the base color of the parts is not black or darkness color, the base color may look fine after carbon fiber skinning.
Also, the gelcoat is very strong.
The finish of the surface uses epoxy resin topcoat or clear car spray.
I think the best surface finish is the epoxy resin topcoat.
Because epoxy resins make a stronger surface than clear sprays.
I hope you helpful.
professional work 😍
Gr8 work .. fabulous finishing
+Ahmed Sebaei Hello buddy!!
Thank you for watching!
I hope you watch other videos on the channel.
And I'll make a good video so look forward to it!
Thank you!!
Can you share the type of epoxy used for your products
+Ahmed Sebaei I am using a gelcoat resoltech product
Epoxy resins are produced in Korea.
I can tell you about the UK website because what is sold in Korea cannot be shipped overseas.
Maybe you can find what you want.
www.easycomposites.co.uk/
Top demais cara! Parabéns, vou chegar nesse nivel ainda!
Please, we need a video tutorial on how to make a carbon fiber car steering wheel. There is none on the internet
Love your videos, can I substitute the gel coat with spray glue? Just to stick the carbon fiber cloth to the product. Thanks!
Hello, Buddy!
it's possible.
However, apply epoxy resin after the spray adhesive has cured completely.
I hope you helpful.
@@ECOLAPStudio Thank you!
Very good video. I want to know the brand of the resin and epoxy you're using. I want to order them and try out sometime. If you dont mind to link all the materials that you are using. Thanks
Hello, Buddy!
I'm buying the materials from online shop in Korea.
However, Korean online shops do not ship overseas.
So I introduce you UK online shop.
Maybe you can find what you want.
I hope you helpful.
www.easycomposites.co.uk/
@@ECOLAPStudio alright thanks buddy
Do you know how to tell the difference between carbon fiber and black kevlar
im curious how well the epoxy bonds to the plastic surfaces, especially considering these are areas that get handled often.
Hello, Buddy!
When skinning carbon fiber, it is important to scratch the surface of the plastic parts by using very rough sandpaper.
The gel coat is absorbed by the strong scratches and helps to firmly attach the carbon fiber cloth.
@@ECOLAPStudio
hi,I recommend that the surface needs sandblasting at least ,Because the black glue is difficult to adhere at the chrome surface。
Sanding with sandpaper does‘t achieve sufficient roughness
Hello i like your video and i want to know the brand of the hardner you use (the black hardner) thank you!
I saw your video, but you only said the material you used, but not the brand so I can see if I have the same or similar in my region... can you tell me? I'll have to make one, because Chevrolet doesn't just sell the Shift Knob? Chevrolet is forcing you to sell the complete automatic transmission.
Very nice tutorial, keep going 👍🏿👍🏾👍🏼
Hello, Buddy!
Thank you so much.
I will make fun and informative videos.
Please, lookfoward to next video.
Thank you for watching.
Can you do one video for plastic around buttons on steering wheel or something very small like details? Pumped up for next video!
Hello, Buddy!
The skinning of small parts is also not very different.
I think trimming is an important part of skinning small parts.
If I get a chance, I'll make a video.
Thank you for watching.
Gut gemacht, danke!
Wow turned out really nice... thank you for sharing
Super. Thanks
Owww. Another great video!!!
Hello, Buddy!
Thank you so much.
I will make fun and informative videos.
Please, look forward to next video.
Thank you for watching.
I am looking forward to the next video! I already purchased the cheap vacuum bags and pump to do my project on my motorcycles. Your videos gave me lots of ideas to do a good job on the budget! Have you ever done a dry infusion with the equipment you use in the videos? That would be an awesome experiment!
I didn't work on infusion.
Of course I want to do Infusion.
But I work at home (apartment), so I'm a little worried about the noise of the vacuum pump.
So I'm thinking about Infusion.
I'll try it if I get a chance!
I will give you another good idea!
Thanks you.
금손이시네요~
볼때마다 놀랍습니다.^^
헐대박... 기어봉 라이트구멍 뚫는거 궁금했는데 안나오네요 ㅠㅠ 깔끔한 작업기 잘봤습니다!
이거 만질때마다 기분좋겠네요
안녕하세요!
정품과 비교했을 때 완벽하다고 볼 수는 없지만
직접 만들었다는 게 볼 때마다 뿌듯함이 느껴집니다^^
시청해주셔서 감사합니다.
bmw純正のカーボンパネルと遜色ないクオリティ！やってみたくなる！
Great Videos! Apreciate that you dont use stupid music :) Another question. My BMW M2 has this raw Carbon Fiber. How do I skin this? Just step 1 after gel coat, but what about the edges? They will come lose and dont be smooth.
Классная работа, ты использовал гелькоут с эпоксидной смолой как состав для адгезии? Какие пропорции смешивания?
Hello, Buddy!
All epoxy resins and gel coats vary by manufacturer.
The mixing ratio is usually indicated on the epoxy.
Hi, quick question, when you applied the clear coat, how many layers you apply and did you do something extra to get that gloss?. Thanks.
I have the same question
Probably 4. You sand it smooth but want as few layers as possible. Really it's up to you. Don't sand through to t carbon fiber.
Vor dem trimming mit welchen schleifpapier hast du geschliffen? Und was meinst mit leveling? 400,600,800er schleifen
That was a very helpful vid thanks man 👍
I hope i can sand that fast like you
looks so easy...
Amazing work! I'm going to try this on my s5 interior aha where did you get the 3m carbon fiber cloth material?
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
Also, if you want skinning, I recommend 240g carbon fiber cloth.
www.easycomposites.co.uk/
I'm doing the same 😂 Audi S5 you mean or ?
@@ECOLAPStudio ï
Amazing job
Very nice video! Looks good! How did you get the carbon fiber cloth? Keep up the nice video's
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
Also, if you want skinning, I recommend 240g carbon fiber cloth.
www.easycomposites.co.uk/
@@ECOLAPStudio thanks. I will take a look at it!
看完對碳纖維的伸展性有更了解. 很有趣.
Hello! amazing work my friend, I did something similar for the carbon fiber instead of wood grain on my f30
Hello, Buddy!
Wood Grain !! You did a wonderful job.
Did it use real wood?
I'm interested.
@@ECOLAPStudio Hello! yes the wood grain on my f30 was burl walnut and it wasa very thin piece of wood with a heavy sort of plastic epoxy overlay
Hi how did you get the black plate of off the shifter so easily?
Matt Nardo use a trim tool to get under the edge that’s triangle shaped, right next to the traction control button that entire piece comes out
Zzafari7 I can’t seem to get the black piece with the R,N, D, d/s off the top of the shifter. The video made it look so easy with a screwdriver but I can’t manage to pry it off. 😅
Ficou muito bom seu trabalho belo acabamento, parabéns.
Do you have the links for all the things to include the carbon fiber to purchase the items needed ?
Great result! Where did you buy vinyl velour ? Thank
Artiste..!
good job I like ...🇮🇩🇮🇩🇮🇩🇮🇩
I to jest KURWA CARBON!!!A nie jakieś zjebane folie👍👍👍👍👍
You deserve much more subscribers!
Edit: i like this style of video
Hello Buddy~
I got a lot of hope and courage after reading your comments.
I will try harder for subscribers.
Thank you so much!!
Hi bro, what is the difference between 200gsm and 240gsm twill carbon fiber fabric?
Epic Video
Thank you for watching.
I will make a more fun and helpful video.
Please look forward to the next video!!
Can we remove the iron part with only carbon fibre ?
Beautiful work do you do this for customers?
Hello, Buddy!
I am not a carbon fiber seller.
I study carbon fiber myself and do various tests.
My knowledge may not be perfect, but I would like to share my knowledge with many people.
Hi, great videos, when you skin car trim pieces in carbon fibre, how much thickness does it add to the piece? Thanks
Hello, Buddy!
When skinning, carbon fiber uses one layer.
It is very thin and is approximately 0.3-0.5 mm thick.
It's just skinning, so it doesn't care about thickness, weight, and stiffness.
What epoxy resin do you prefer to work with? I don't want to buy bad epoxy resin and regret it all. THNKS
Hello, Buddy!
I purchased materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html
Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html
top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html
carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html
I hope you helpful.
Hi! Do you sand 400 grit and finish with uv top coat? It very glossy nice finish but you do different finish in other video!
Hello friend.
Sand with P400~ P600 or P1000 sandpaper and spray with clear spray.
This is in Korea & he's a smart Korean guy.
Looks like you used weblock carbon fiber in the video?
Is there a reason you didn't vacuum bag these parts?
Молча, тихо, но всё понятно. лайк
Wow very impressive. What rear diffuser do you have?
Hello, Buddy!
My car has installed Varis diffuser and BMW M Performance diffuser.
Varis diffuser is tough design.
I hope you helpful.
Thank you for watching.
ECO-LAP Studio thanks man! Is it authentic varis or rep?
+Christian Perles Varis is rep. M performance is genuine. ^^
ECO-LAP Studio nice! Do you remember where u got it from?
+Christian Perles The varis made in Taiwan. I got via Korean importer.
I think you can find out on ebay or aliexpress.
But I'm not sure that's quality.
Super contenue !
just a question.. could i use vivid carbon fiber vinyl wrap and add epoxy to give it that feel and texture and shine?
The carbon has thousands of fibers that catch light from different angles, vinyl will never be able to reproduce that... sure you can epoxy over vinyl to get the thickness and smoothness, but the light will show the difference... and if you are going to epoxy over vinyl, why not just use carbon, you can practice with regular fiberglass to learn techniques if you feel the real carbon is too expensive. Of course you can just use carbon vinyl wrap and know that it's not real carbon.
Hola podrias indicar donde consigues los materiales? Quiero empezar ha frabricarme alguna cosa en carbono también. Gracias un saludo
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
Also, if you want skinning, I recommend 240g carbon fiber cloth.
www.easycomposites.co.uk/
Very nice indeed :)
Hello can you tell me where you got the products from? The epoxy resin?
Hello, do you do any of that jobs to out or it's just for yourself???
めちゃめちゃかっこいいm4だな
와.......이런 고퀄 작업기 광고는 언제 나오나요? 언능 붙었음 좋겠습니다^^
수익창출 조건은 갖춰졌는데 최근 코로나 바이러스로 인해서 승인절차가 늦어진다고 하네요 ^^
기다리면 좋은 날이 오리라 생각합니다.
감사합니다 ^^
굿입니다요..~~
정말 한땀한땀 대단합니다~ ^^
Are mixing every 2 hours new epoxy resin Or do you use the same mixed stuff all the time. Why arent you using the vacuum pump this time ?
Hello, Buddy!
A new epoxy resin should be mixed every 2-3 hours.
The gear knob and the gear plate did not have many curved surfaces, so it was possible without a vacuum bag.
I also wanted to make trimming easier.
For parts with many curved surfaces, it is recommended to attach a carbon fiber cloth using a vacuum bag.
@@ECOLAPStudio when do i use the vacuum bag...in what step exactly ?
Do you use sandpaper between every epoxy resin painting, or only first time and then just paint and paint....Happy eastern
겔코트는 원단의 접착력을 위해서 바르는건가요?
Luvlyyyyyy