My 2014 impala had 60.000 miles on it and started to hear what sounded like tire tread on the road. Ended up bad wheel bearing on the rear left so changed them both. Good as new now. Great video.
I was just as upset as you were at the end of the vid...I had to come back and read the comments...glad to know it was the other side . I was sure it was the bearings gone bad on my Impala as well...you scared me!!! Glad you got it figured out.
I have a 2014 chevy impala ltz.I had stabilitrack, abs and powerstering service codes come on in one day. Turned out to be a rear right wheel bearing. After I changed it everything worked fine.
Had the same issue as well on my 2016 make sure that your tcm is communicating as well the transmission control module because I did that as well as hub assembly and a stuck cailber
A little side note clean your wheel speed sensors too , one 10mm bolt it might stop your stabilitrak light as well while youre doing the hubs for a clear read 👌
Just watched your video👍and enjoyed that fact that you took breaks in video obviously to not show the angry episodes. LOL Anyway I did mine also and both were actually bad. Thought the noise was on right rear but it was both that were bad. So maybe try replacing other side
I have a 2018 impala and being you said you have uneven wearing on the tire it could be the rear control arm bushing being loose that’s what I’m dealing with right now in case you never figured out the problem or someone else needs advice
Bought my 2014 impala with 72000 miles on it. I’m at 108000 now and a third one has went bad. ALWAYS THE REAR. Ordered some Timkens. I’ve heard their good
I just had both rear ones done today. Second time, with 170k miles on my ‘14 Impala. This is the only car where I’ve had to replace bearings. Is there an issue here?
Both hub assembly for the rear were bad after I changed Both no more noise. Wanna know something funny from the date I made this video about 3 years ago there bad again.
Im getting ready to change one of mine. Not due to bad bearing but my abs ring. Im hearing its a common problem due to corrosion . I was driving and abs light came on stabiltrack warning popped up and i lost my steering power assist which dealer ship said the rear abs can cause it . Thanks for the video.
My 2014 impala had 60.000 miles on it and started to hear what sounded like tire tread on the road. Ended up bad wheel bearing on the rear left so changed them both. Good as new now. Great video.
I was just as upset as you were at the end of the vid...I had to come back and read the comments...glad to know it was the other side . I was sure it was the bearings gone bad on my Impala as well...you scared me!!! Glad you got it figured out.
I have a 2014 chevy impala ltz.I had stabilitrack, abs and powerstering service codes come on in one day. Turned out to be a rear right wheel bearing. After I changed it everything worked fine.
Had the same issue as well on my 2016 make sure that your tcm is communicating as well the transmission control module because I did that as well as hub assembly and a stuck cailber
Having that issue at 160,000 miles. Maybe the tires/ balance. I have to tackle it too. Good Job!!!
To check bearing raise wheel off ground and grab it at 12 +6 o'clock and check for play, if you ave any play you need to replace.
Lucky, yours came off alot easier than mine is.
A little side note clean your wheel speed sensors too , one 10mm bolt it might stop your stabilitrak light as well while youre doing the hubs for a clear read 👌
Just watched your video👍and enjoyed that fact that you took breaks in video obviously to not show the angry episodes. LOL Anyway I did mine also and both were actually bad. Thought the noise was on right rear but it was both that were bad. So maybe try replacing other side
❤Thanks for you input 👍
Thanks for the video...
How can I pinpoint the location of the noise? It sounds like it's in the rear but quits when I turn the wheel.
Good recovery 👏
I commend for completing the video and saying didnt fix the problem. Still snapped and did great with the worksmanship. Torx bits and metric sockets?
I have a 2018 impala and being you said you have uneven wearing on the tire it could be the rear control arm bushing being loose that’s what I’m dealing with right now in case you never figured out the problem or someone else needs advice
maybe it was the other side rear wheel bearing, best to change both
Was PTL a good company,and why did u leave if u don’t mind me asking....
Preciate the video needed this
If you use a swivel adapter on the top nut, it’ll come out without having to remove anything else.
Hi guys just watched my video again the wheel bearings are bad again gonna change them again 5 years later it's my daughters car now
I have a 2014 Chevy impala just like you’re and at 70,000 miles I needed 2 new wheel bearing hub assembly’s
It was making the same noise it’s not the tires
Same for me
What was the problem or noise on the impala
Bought my 2014 impala with 72000 miles on it. I’m at 108000 now and a third one has went bad. ALWAYS THE REAR. Ordered some Timkens. I’ve heard their good
I just had both rear ones done today. Second time, with 170k miles on my ‘14 Impala. This is the only car where I’ve had to replace bearings. Is there an issue here?
Do u see the problem
I messed up too and forgot the dust cover..
What was the problem I’m having the same issue
It was his other side wheel bearing. But if both bearings been replaced and it sounds like a bearing still.. it’s your rear tires
Where did the noise actually come from? Mine is doing the same.
Both hub assembly for the rear were bad after I changed Both no more noise. Wanna know something funny from the date I made this video about 3 years ago there bad again.
that hub you removed from the box is for the front wheel it is splined for the drive shaft
Same assembly for front and rear on this car.
Praise The Lord Trucking. I live not to far from their hub on Chickoree Mountain.
what was the problem?
I changed the wrong side
LOAD JOCKEY what side it was. ? Great video!
LOAD JOCKEY 😂😅
Always change in pairs
Oh yeah, your wheel bearing came off way too easy. I think mine is JB welded on
Pairs always (-;
Its probally the other side
+Tommy Millen man if its the other side then that would make me an idiot 😂😂😂
@@halejermichael i did the same thing lol
Hey it was the other side just finished changing it noise is gone thanks man
Im getting ready to change one of mine. Not due to bad bearing but my abs ring. Im hearing its a common problem due to corrosion . I was driving and abs light came on stabiltrack warning popped up and i lost my steering power assist which dealer ship said the rear abs can cause it . Thanks for the video.
Just like the brakes... change both at the same time
THE noise is on the front 🤦🏾♂️