The biggest issue with this is that the factory 6x9's in the door are crossovered from the factory amp and they do not have any highs going to them. So they only play midbass and midrange. They are also rolled off on the low side so there is a large lack of bass. If you install a 6x9, it will not play any highs which negates the whole tweeter. The dash tweeters play the highs. We just scoped an Impala's speaker outputs and found this out. Check out the Impala video on our channel to gain a full understanding of this. A much better choice of a speaker set up would be a component set with a midbass driver and a separate tweeter. If you notice the factory door 6x9 doesn't have any tweeters in it, and that's why.
Thanks bro.... I used this video to do my front speakers on my 2014 impala limited. Not really different, just looks lil bit different. I'm amazed how much better it sounds. Now wanna do the back next. Thanks again buddy..... God bless you too!!
seen you vid many time before i got the balls to cut the factory speakers ,thanx .....! mod them for better quality speakers .. 750 2 channel amp . i have 6x9s in the back , component . 150,200 watt 6 1/2s in the front one channel for the front .. both 6x9s share one channel . the vol , gain control is barely on. no were close to a quarter way . bass setting on my factory radio always on the lowest setting ... more power than i need ... fun when these young kids roll up on me with all that bass ,no clarity ... they get lil pissed knowing my 6x9s hitting hard with the bass control at its lowest level .. i ran my front L channel to the back .. now im able to control my rear and front ,fade them out ..
I bought a 2017. Not sure if my speakers were previously upgraded as I have not pulled it apart. But I turned the bass all the way up in the audio settings and put the fade in the middle of the care and a few clicks back from the middle and I have tremendous bass
Good video....simple straight to the point type of thing....not like all these other videos that take forever like 10 -15 min just to start the project
Great video my G...helped me out a whole lot. But I'm have trouble putting the bitch back on correctly. It's all good until the little weather piece or w.e. it's called at the inside window. 2 doors that kinda fucked rite now cuz I can't figure it out.
I mean. The new Chevys DONT sounds bad at all. My brother had a 2013 Malibu. And that radio was stock and wasn’t the upgraded pioneer option. It was the regular GM speaker. And it sounded like a Chrysler300 but better. It sounded better than the pioneer LTZ trim on the other Malibu’s. I definitely prefer the stock speakers in new Chevy cars now.
I also have a 2016 and the way Chevy arranged the Impala's audio setup makes speaker replacement a complete pain in the ass. From my understanding, you should be good to use 3-ways replacing your rear 5 1/4's. However, the front 6x9's are wired for 2-ways. So if you want to maximize your 6x9's by using 3 or 4-ways, you would need to bypass the factory amp. That's an expensive process that I was pretty disappointed to discover.
Hiram Caballero you have an aftermarket stereo I see tho I’m trying to run same factory stereo tho just looking in to options if you have any recommendations please do soo
Hey how did you get your 6x9 to give you more than just bass. I bought pioneers speaker and I get great sound quality from the rear speakers but the front only give me bass any ideas thank you
What I did was went and got 4 kicker 6x9s went to the trunk and in hooked the front doors to the back doors at the amp. I used 4 because the factory speakers are 2 ohm. The amp likes to see that. Basically I ran 2 speakers a channel for a final load of 2 ohms. And did a aftermarket 12 for lows and it’s much louder now.
Awesome video, very good for showing how to take panels off for any reason. God bless you too brother
The biggest issue with this is that the factory 6x9's in the door are crossovered from the factory amp and they do not have any highs going to them. So they only play midbass and midrange. They are also rolled off on the low side so there is a large lack of bass.
If you install a 6x9, it will not play any highs which negates the whole tweeter. The dash tweeters play the highs.
We just scoped an Impala's speaker outputs and found this out. Check out the Impala video on our channel to gain a full understanding of this.
A much better choice of a speaker set up would be a component set with a midbass driver and a separate tweeter. If you notice the factory door 6x9 doesn't have any tweeters in it, and that's why.
Audio Designs & Custom Graphics what about if I hook up my front door 6x9s to a aftermarket amp??
@@kinggagedid u figure it out ?
@@anta1538 nah I just kept my factory speakers in
Late to the party. I'm actually doing this for a living at a dealer. I'm new. You just saved me a ton of time. Thanks
This man just made the video very simple steps with few words.. It was very good bro. 👍👍👍
Great video, thanks! Helped me out with replacing my side mirror.
Thanks bro.... I used this video to do my front speakers on my 2014 impala limited. Not really different, just looks lil bit different. I'm amazed how much better it sounds. Now wanna do the back next. Thanks again buddy..... God bless you too!!
Bro dies ur speaks sound low in the front
seen you vid many time before i got the balls to cut the factory speakers ,thanx .....! mod them for better quality speakers .. 750 2 channel amp . i have 6x9s in the back , component . 150,200 watt 6 1/2s in the front one channel for the front .. both 6x9s share one channel . the vol , gain control is barely on. no were close to a quarter way . bass setting on my factory radio always on the lowest setting ... more power than i need ... fun when these young kids roll up on me with all that bass ,no clarity ... they get lil pissed knowing my 6x9s hitting hard with the bass control at its lowest level .. i ran my front L channel to the back .. now im able to control my rear and front ,fade them out ..
Dennis Kingsley I bet it sounds clean
I bought a 2017. Not sure if my speakers were previously upgraded as I have not pulled it apart. But I turned the bass all the way up in the audio settings and put the fade in the middle of the care and a few clicks back from the middle and I have tremendous bass
Mine too, I hear complaints of no bass from this car and I DO NOT have the Bose but my speakers absolutely SLAM.
I like this because ur descriptions is VERY specific! thanks
Good video....simple straight to the point type of thing....not like all these other videos that take forever like 10 -15 min just to start the project
Very helpful. The guy at the audio shop told me I had 6.5 inch speakers in the front. Now I'm seeing 6x9s
I got 6.5" in the back doors
Appreciate it bro. My window came off the track. Very helpful 💯💯
It's about time GM or somebody brightened up and used a 6x9 for a door speaker so you get good sound.
Thanks man thanks to you I am motivated to work on my 2016 2lt your the best bro
You’re a pretty damn good teacher bro !! Thanks for the video !!
Awesome video . U make it look easy. I'm tempted to do ot my self
Thanks for the video, it helped me replace my mirror!
Great video. Thank you for being so specific about each step.
Straight to the point with some pointers nice
You explain things VERY WELL. 👍🏾👍🏾
Your vedio helped me today thanks
Man I love this set up
Awesomely done man looks great
Great video my G...helped me out a whole lot. But I'm have trouble putting the bitch back on correctly. It's all good until the little weather piece or w.e. it's called at the inside window. 2 doors that kinda fucked rite now cuz I can't figure it out.
Your creative. Can you show how to replace door mirror without removing door panel? If it can be done. Thanks
You don’t have to take every thing off just push the tiny clips and the speaker will come out I have the same car
Do u know how to take out the dash 1 inch speakers? Mines 2017 but I believe it's the same?
This video is gold. 🙏 Thank you!
Do a video on the front dash please
Hiram, is this what I need to do to replace my driver mirror?
i hav a 2013 impala.... where,what fuse did you connect the blue remote wire to.... how did you connect your blue remote to?
Is a 2019 LT 6x9 in the front too ?
Got a quick question my front door speakers on my impala sound really low then I changed them an the speakers are still low sounding
Hey man... got a 2015 Impala door wiring question.. anywhere I can shoot you a message?
Hey hows it going I have a 2014 Impala and was wondering if you do install got a new radio and wanted to switch it out will pay and meet Thanks
Bro thanks so much cause I have a 2017 and I was paying ppl to do everything but I’m now going to do shit my self!
I mean. The new Chevys DONT sounds bad at all. My brother had a 2013 Malibu. And that radio was stock and wasn’t the upgraded pioneer option. It was the regular GM speaker. And it sounded like a Chrysler300 but better. It sounded better than the pioneer LTZ trim on the other Malibu’s. I definitely prefer the stock speakers in new Chevy cars now.
Say bro can you do a video on rear door panel removal?
Is it possible to install 6.5 component speakers in the front doors?
Will those pioneers 6x9 fit without the cutout?
I want to replace my 6 OEM AC DELCO speakers with the 8 Bose OEM and Bose OEM amp. Do I have to make any modifications?
Yes to the factory amp
What size are the factory front door speakers and the speakers behind the rear seat please 🙏
samiroo Use www.crutchfield.com
It gives you the sizes on front door speaks and rear speakers and suggests speakers for you. Hope it helps you out bro
Dannyboi00 thank u👍
Is it the same for the bose system or do i need extra stuff
Very informative but still really scared to try to pull that plastic piece off the door. Don't wanna break it on my new car lol
Thanks for the tip but how did you install the amp RCA wire to the factory radio
I had an aftermarket radio so I did not have that issue .but there is a system where you can hook up to your factory radio and has pre-outs
Thank you for the info
I have a 2016 Chevy Impala LT and I was thinking of replacing the rear door speakers can I use a two way or a three-way on it and will it be okay
I also have a 2016 and the way Chevy arranged the Impala's audio setup makes speaker replacement a complete pain in the ass. From my understanding, you should be good to use 3-ways replacing your rear 5 1/4's. However, the front 6x9's are wired for 2-ways. So if you want to maximize your 6x9's by using 3 or 4-ways, you would need to bypass the factory amp. That's an expensive process that I was pretty disappointed to discover.
Llj custom makes a loop back harness for the amp to by pass for about 200$ lljcustom.com
Are those 6x9s bluetooth? I ain't see no wires connected
How did you wired your amps to the speakers if you have same original wires on The speakers
I ran all new wires from amp too speakers
Hiram Caballero you have an aftermarket stereo I see tho I’m trying to run same factory stereo tho just looking in to options if you have any recommendations please do soo
Hey how did you get your 6x9 to give you more than just bass. I bought pioneers speaker and I get great sound quality from the rear speakers but the front only give me bass any ideas thank you
They run from ur factory unit like that. But u can run all ur speakers to a aftermarket amp and really be banging.
+Hiram Caballero thanks you just gave me my fathers days gift idea
Nice video bro...
Anyone know if there’s a video to change rear door speakers
Do anybody know how to get to the speakers in the dash?
what size are the factory back door speakers?
I'm sure 6 1/2"
thank you
nice video thanks for help
But why would you do that to the door like it's really neat you now how to do all that but it doesn't look awesome neat
Yeah I wanted somthing small so when I opened the door they knew it wasn't stock.
Anyone know what the impedence is for these speakers-keep getting conflicting information as to whether it's 2 or 4 ohm...
For the non Bose system I mean...
dolbyfool80. on the factory idk. i
Hiram Caballero thx for responding at least! looks like the speakers you installed were 4ohm
dolbyfool80 yes the aftermarket ones were 4 ohm i believe.
Hiram Caballero ok cool! thanks again for responding
Thank you for sharing
What I did was went and got 4 kicker 6x9s went to the trunk and in hooked the front doors to the back doors at the amp. I used 4 because the factory speakers are 2 ohm. The amp likes to see that. Basically I ran 2 speakers a channel for a final load of 2 ohms. And did a aftermarket 12 for lows and it’s much louder now.
Make a video
Good work
good job man!!
very very nice..
Metal hammer on plastic trim piece = bonehead move.
Invest into a plastic trim piece prybar set. They are like $20.
Good video but yeah i aint messing with that lol