At TDC the crank is at 12 not 6 o'clock and the camgroove is 180 degrees out instead of level for the locking tool. I assume the remedy is reinstall the cams right?
Hi! Will you give me advice please. I have an little oil leak from under the timing chain cover (AJ34S XKR 2008). Mechanic says to replace timing chain cover gasket. For this action do I need to take out the engine? And do I need to disconnect the supercharger?
@@goharrisautomotive yes, I’ve TDCed everything with crank lock tool and cam holder locks perfect on drivers side but passenger side won’t line up. Had no codes or check engine light. Just annoying rattle
![[TH] 2024 PMSL SEA W2D5 | Fall | พลาดวันนี้ จะต้องเสียใจ](http://i.ytimg.com/vi/A5-Cuo12p6A/mqdefault.jpg)
Nobody takes the time to explain cam timing. Excellent video and informative as heck! Good video my friend.
Outstanding video, you are a lifesaver. In the middle of tearing into a 3.0 SC. It's actually not too bad. Just need to have the timing tools.
very professional experience job explaining the timing chains and settings thanks
Thank you
Great explanation Sir. Thank you!
You are welcome!
Good
At TDC the crank is at 12 not 6 o'clock and the camgroove is 180 degrees out instead of level for the locking tool. I assume the remedy is reinstall the cams right?
Brilliant . nicely explained I have 4.2 sc 87 k now am wondreing how long before i need to confront
Glad it helped
Hi! Will you give me advice please. I have an little oil leak from under the timing chain cover (AJ34S XKR 2008). Mechanic says to replace timing chain cover gasket. For this action do I need to take out the engine? And do I need to disconnect the supercharger?
Yes your super charger will have to come off
@@goharrisautomotive Thanks! But what about the engine, come off too , or there is no need to replace the timing cover gasket?
Can I take off 1 chain at a time? I can’t get both cam locking tools on at the same time
Yes you can. Are you sure your cams are not 180 out?
@@goharrisautomotive yes, I’ve TDCed everything with crank lock tool and cam holder locks perfect on drivers side but passenger side won’t line up. Had no codes or check engine light. Just annoying rattle
@@goharrisautomotive is there a way to contact you
This is process for the 3.0 supercharged right? And can it be done in car?
Same. And yes it can be done in the car
Good bro