Power Steering Pump Replacement Dodge Dakota Durango 2000-2004
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2024
- This 2004 Dodge Dakota 4.7L had a broken power steering pulley which caused the belt to shred and make a mess. Hope you enjoy the video, be sure to Like and Subscribe!
Thank you for watching FixItPhillip!
Ps pump for:
2000 2001 2002 2003 2004 Dakota 4.7 V8
2004 Dakota 3.7L V6
2000 2001 2002 2003 Durango 4.7L V8
With FixItPhillip, You can fix it! - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.82[2/2] เมาท์มอยกับ 3 สาวเพื่อนซี้ ที่พร้อมขยี้พ่อหมีได้ทุกเมื่อ](http://i.ytimg.com/vi/Wwn7WnylNtQ/mqdefault.jpg)
There are several of these on TH-cam, but yours is by far the best. Removing the water reservoir and the coolant hose makes this *so much easier* - thanks!
One of the best car repair videos I've ever seen.
Thank you
Brother, thank you. I used this today, step by step, (although my belt was still intact) to replace my pump. Top notch!
You're welcome brotha
Very informative video I especially noticed how you told everyone watching what size socket to use.
Thank you for sharing , most defiantly on of the Best repair videos online.
Thank you
Thanks man, you gave me the confidence to do my power steering pump and hoses, everything went great. I really do appreciate it so much.
Thank you! Please be sure to subscribe, much appreciated! I'm happy you were able to knock it out
Thanks for a great video, all the info without the babble!!!! A 10 out of 10!
Your welcome. Please be sure to subscribe, much appreciated!
Greatly appreciated. O ring info was of importance.
Brand replacement?
Well done, well lit, clear descriptions, very helpful
Thank you I'm happy it helped, please be sure to subscribe, much appreciated!
Good job
To purge the air I believe the FSM says to raise front and turn the wheels lock to lock 10 times without starting the vehicle. Then you check fluid and start engine.
Really good video, thank you.
To bleed the system you just put it in the air turn it on and turn the wheels back and fourth a couple times correct? Then shut it off and let the air come out then it should be good?
Yes, some of these dodge pumps you may have to use vacuum to the reservoir also with the vehicle off in order to get all the air out. They are picky sometimes in my experience
@@FixItPhillip ok thank you very much!
What type of light is that you're using? Nice video, I have to replace my 2000 dakota pump and fortunately it looks pretty straight forward.
Awesome thank you it’s more visual easy to use stand. But where can I get a drill like yours? I want one.
I have the 2000 Dodge Durango 5.9….is it the same process as this video? My reservoir isn’t plastic it’s I think like rusted out aluminum. How would I know if it’s my steering pump that failed or my rack and pinion?
Great video
Thank you! Please be sure to subscribe, much appreciated!
I seen you used ATF +4 transmission fluid. Is ATF +4 transmission fluid what's recommend to fill the power steering?
For this vehicle atf+4 is what it calls for for the power steering
That's transmission fluid or power steering fluid
Atf+4 is trans fluid, which for this model and year is for the power steering fluid
Hello..do you know the part number of the o ring and the other little gasket?becuase my power steering pum is good is just leaking from the joint between the pump and the receivor.
Let's say the Seals on the Pump is bad only.. Is there a Rebuild kit for the pump..?
Technically im sure it can be done, ive never rebuilt ps pump internally, for the price of the new or rebuilt aftermarket pump nowadays is usually pretty inexpensive and usually has a lifetime warranty.
if your leak is from the actual pump itself i would change it, if its leaking from a oring like from the fluid reservoir to pump, or from a pressure line to pump oring you can change thise out if you like.
@@FixItPhillip Throwing Oil from the Front shaft seal... looked for a reseal kit none on line... New Unit $123.00 with Reservoir..
If it was me in would replace it
Good luck brotha thank you for the question, please be sure to Subscribe, much appreciated!
@@FixItPhillip After 19 years and just over 150.000 miles I have the Original Factory Accessory Drive Belt When I bought the Truck New... All I have ever done is change the pulley Bearings or pulleys... Tension or Idler... Has cracks in the grooves but no chunks missing..
What was the cause of the replacement did u have a bad leak
How did you manage to take the radiator hose off like that with out dumping coolant everywhere
Its the upper hose. Not much will come out of it it being at a higher point not much will come out usually
Used this video just now the pump worked at first but now it is not turning at all did i do something wrong
Dont suppose the bolts are in same location on an 07 as they are on 2000-04?
I believe its similar design but possibly not exact. I do know the ps pump on a 07 still has the 3 main bolt design behind the pulley that connect the ps pump to the engine. If i had a 07 here i would check for you lol
FixItPhillip yeah there’s hardly anything on 3rd gen Dakotas on here, mines got that getrag238 in it and I had to do the clutch no vidyaos on doin a clutch on one these trucks but it’s straightforward enough as if it’s any other manual transmission... joined a group of 3rd gen Dakota n them guys that do their own work or post issues with theirs would be great to be slapped up on TH-cam as well... I have always been a fan of these little trucks even though they have problematic, take that back my 3rd gen has been problematic vs the 1st gen and 2nd gens I have owned. Would have been nice to get some aftermarket parts for these trucks too they been out long enough
@@SmudgyContent i will definitely post some 3rd gen repairs if i get them in brotha. Be sure to Subscribe please. Good Luck with your truck brotha and thank u for watching
Awesome video. But... what's up with all that screaming in the background?
IV had 3 different ppl put on 3 different pumps and it still leaks out what's going on here
What is that tool that you are using to drive the bolts?? And how much does it tend to cost?
A Milwaukee 3/8 ratchet and a Milwaukee 3/8 impact gun. The ratchet uses the m12 batteries and the impact is the m18. Plz be sure to Subscribe, much appreciated!
They are roughly 200 to 300 each
The pulley is made of plastic? What the hell Dodge?!
too dark. can not see
Please fly down to where I live and replace my power steering pump for free and at your own expense (buy all parts yourself), and do it all with your bare hands (no tools), thanks in advance.