Clickbait. Fun fact: you could block the whole top side of the oil pickup screen and oil could still flow through the side exits. Testing has shown that RTV in the tube has no effect on oil pressure.
Yup. Its been proven over and over that the "oiling" issue is caused by long, high G, right hand turns. Of which only a few tracks out there have corners like this. If this was actually an issue, every single subaru made for the last decade would be failing.
3:05 that’s the timing cover not the valve cover. Having fujibond on the bolts that hold the oil pan is normal, pan has to be torqued down before it dries or could leak. Refer to all data or STIS for the procedure. Thats more silicone than factory. The bead has to be a certain diameter and it goes on the inside of the bolt hole only (not both sides) check your gf car if your buddy did it the exact way you did in the video
Clickbait. Fun fact: you could block the whole top side of the oil pickup screen and oil could still flow through the side exits. Testing has shown that RTV in the tube has no effect on oil pressure.
Yup. Its been proven over and over that the "oiling" issue is caused by long, high G, right hand turns. Of which only a few tracks out there have corners like this. If this was actually an issue, every single subaru made for the last decade would be failing.
3:05 that’s the timing cover not the valve cover. Having fujibond on the bolts that hold the oil pan is normal, pan has to be torqued down before it dries or could leak. Refer to all data or STIS for the procedure. Thats more silicone than factory. The bead has to be a certain diameter and it goes on the inside of the bolt hole only (not both sides) check your gf car if your buddy did it the exact way you did in the video
I’m sure you put way more than silicone than what is needed. I’m sure that pickup is clogged again.
There was over triple this between the pan and the bottom of the motor. It’ll be good
You put more RTV then the factory did, unbelievable
That is a motherload of rtv on re-assembly
imma jus go ahead an order a new oil pan... can't be that expensive. time is money
Add a baffle while you're at it!
@@sarcasticundertones3513 absolutely
Still talking about rtv huh?
6:30 LOOOOL so fukin funny 🤣honestly anyone would probably react the same. Thats a lot of silicone jesus
2024 as well?
This is just bad. Annoying really.