I have a question for my nerf arsenal and i dont know alot about modding and it sounds like you do so In my Rival apollo there was an small orange piece with a spring located under the plunger tube that keeps coming out of the barrel the pice also has a curve on the side and the bottom has the hole for the spring and 2 rectiagle/square pieces on the bottom if i can figure a way to link an imagine i would it seems like the blaster works fine without it i just wanna makesure. Kind regards and thanks for any possible help
You could have left extra material from that bottom cut, then used a plastic welder to heat and form it closed using its own plastic, then weld a seam and sand it. Kinda how you make flaps for a box when it has none. Great video!
I want to remove ball storage for cosmetics but I have no clue what to seal it up with, any ideas? I’ve never worked with epoxy or anything like that so what would be the best choice?
You can buy short lengths of picatinny rails (the rails used on real guns) on Amazon for under $20. Most of them are plastic so they should be easy to cut if they’re too long and they should also bond pretty well to the gun with some epoxy or other strong glue
I bought a knockout from eBay and it’s not shooting and the air restricter is gone, and also when I prime it it’s kind of loose and the orange indicator doesn’t show, can you please help
Maybe use the right size. To check if it is the right one or not, if the screwdriver twists without resistance, it is too small. On the otherhand, if it is too big, it will spin, with small resistance and the screwdriver will go up and down. If it is the right size, it'll have lots of resistance and won't do either of those things.
The sound when he drilled the brass
The air restrictor on mine flew out on its own. I got a free mod without doing any work!
that's actually cool
I have a question for my nerf arsenal and i dont know alot about modding and it sounds like you do so In my Rival apollo there was an small orange piece with a spring located under the plunger tube that keeps coming out of the barrel the pice also has a curve on the side and the bottom has the hole for the spring and 2 rectiagle/square pieces on the bottom if i can figure a way to link an imagine i would it seems like the blaster works fine without it i just wanna makesure. Kind regards and thanks for any possible help
This is such an underrated video
You could have left extra material from that bottom cut, then used a plastic welder to heat and form it closed using its own plastic, then weld a seam and sand it.
Kinda how you make flaps for a box when it has none.
Great video!
Good analogy
love your channel guys keep it up
🤦 this was like watching a toddler play with an open jar of peanut butter…
Hey! Awesome video. I want to keep the rival rounds in mine. Will the air restrictor delete help with the fps for that?
ive noticed when removing the air restriction, you dont get much of a gain, if any at all.
XFoxGames Oh okay, thanks for the quick reply. Do you know of any mods that can be done to give it a boost?
@@cmercer89 The only one I can think of would be K26, not an insane increase but enough to give it more of an edge, 20 - 30 extra fps.
i wanna mod my knockout but i don't have any tool to trim the bullet holder, what tool should i use other then the tool used in the vid?
I used a Dremel if that's what you're talking about
Dude you can just put multiple rounds in at once and you won’t have to do anything to the gun it’s so fun I can fit like 5 round in at once
I'm curious on the rubber grommet idea, where abouts did you put it?
I heated up a screwdriver and melted it through the things holding on thr air restrictor. Showed that thing who's boss
Haha that's a way to do it lol👍👍
I want to remove ball storage for cosmetics but I have no clue what to seal it up with, any ideas? I’ve never worked with epoxy or anything like that so what would be the best choice?
You can buy short lengths of picatinny rails (the rails used on real guns) on Amazon for under $20. Most of them are plastic so they should be easy to cut if they’re too long and they should also bond pretty well to the gun with some epoxy or other strong glue
My gosh, why wouldn't you give the diameter of the sleeves?
I bought a knockout from eBay and it’s not shooting and the air restricter is gone, and also when I prime it it’s kind of loose and the orange indicator doesn’t show, can you please help
How many times did he say kinda
And its stock from the knockout can fire three elite style darts if you push them into the front of the barrel and then load it like normal
lmao i just tried this and i got a 3 inch grouping at about 10 feet they all went in my target
One of my screws is to ground up for the screwdriver to catch. I can't take it out or screw it in further. How should I deal with this?
drill it out
Your screw is stripped, meaning the metal was too weak, and it bent. There are tons of solutions on the internet, like what the person above me said
Maybe use the right size. To check if it is the right one or not, if the screwdriver twists without resistance, it is too small. On the otherhand, if it is too big, it will spin, with small resistance and the screwdriver will go up and down. If it is the right size, it'll have lots of resistance and won't do either of those things.
can you link the stl file from thingiverse?
I let my nephew play with mine now it won't cocc bacc any ideas?
as a dremel replacement, i used a pair of wire cutters i use with my 3d printer
the Knockout has an air restrictor?? that means its okay to dry fire right?
never had an issue with mine
@@xfoxgames sweet!
Can you do a video on putting it back together plz because when I opened mine everything popped out and I didn’t see where everything went
If i were to put a k26 in a knockout would it be real hard to prime?
I believe Captain Xavier tried that in one of his videos, the way the spring is set up it cannot take a K26
It can take a k25
I need help I took my knockout apart to do the short dart mod how not firing can you help
What's it not doing. Cocking, or trigger?
its cocking not firing
what is the white thing with spring and a flat orange piece 2m by 4m it came out of gun but not in now
do u have a video ...
@@troyrcman4220 try to post it to youtube
Can I take out the air restrictor with the stock barrel or do I need a new barrel
I'm going to upgrade mines
A mod without changing the gun just put multiple round in at once and it will go ballistic
Half dart
My air restritor fell out
cant get it 2 play ugh
Putting the sleeve on the breech be like: 👌🏻
*Breach
Al you had to do was put the front part on and call it a day 🤨
I broke my gun doing this 😤😭😭