No matter how many times I mod a Knockout, I come back to this video when it's time to reassemble the trigger mechanism. This is my sixth Knockout build. Thanks again Cap'n.
Captain! This video was a blaster saver! I finally got on the Knockout hype train and wanted to brass one. Upon butterflying the shell, it promptly exploded! All done now, 150 fps half darts with no spring upgrade. Thank you! Bangarang!
Good video. The newer ones have all of the same sized screws. Also, this was the first video that I saw a good picture of the trigger bar. The one on my son's blaster wasn't near as clean with the bends, this made the trigger extremely heavy (I was pulling it with two fingers). I figured it was the trigger bar after confirming it with this video I bent them clean and it fixed the problem.
I guess the new one also has a flaw in the orange spring holder. When the gun is fired it slams against the retainer screw with the wide flange and it breaks it. The solution is to add more padding to the top of the white piston where there already is padding but not thick enough.
Thank Captain - I had minor challenges after electing to make one blue with no Rival on either side and another with Rival on both sides after Ross had the dual pack with blue having Rival painted on left side - first ever.
I actually discovered something about this blaster a bit ago. There actually is a wrong way to put the rod that connects the trigger to the catch in, provided that you keep the trigger safety in. The u channel bent into the rod appears to be cut out so that the safety can slide back and forth
Thanks for the help, got mine yesterday and it fired the air restrictor out the front earlier so had to open it and put it back in (extrasensory hearing and knockout is loud as is lol) Edit:god damn it it fired back out again I give up lol, blaster still functions atleast so the video did what it aims to, probably just an issue with the parts themselves in this case. Atleast it's only the air restrictor
The issue I have is that pulling the big thing to prime the bullet will not load properly, to turn the icon orange. Pulling the lever to unlock the barrel also pops the primer out. Any ideas?
so I took out my air resticter and then reassembled it and after one shot the plunger handle went loose so i took it back apart checked out the plunger and the plastic attaching the handle to everything stapped can anyone explain this
@@CaptainXavier ok because I lost that piece then found my first knockout and took the piece from the old one and put it in my new one and now it works, thanks for the tutorial and I also subscribed.
Idea for a future build: you built a modular bigshock a long time ago, maybe you could try modularizing one of these? There’s certainly enough air volume for at least a few kinds of ammo....
@@CaptainXavier Am asking this question coz I can't buy spring for nerf . They are not sale in our country.So i can put it in my takedown by taking out the spring from my knockout. My Knockout velocity is more harder then my takedown. I guess I will put the spring hope it work.
@@CaptainXavier im thinking of selling my nerf arsinal its like 20 blasters and three stryfes and getting into paint ball with my dad still my favorite TH-camr though
@@CaptainXavier hi thanks for the reply but now I have another problem ...I managed to close the thing now the problem is the trigger locks up when primed
Sounds like the trigger lock is not disengaging. You are pushing the priming handle back up after priming, yes? Unlike most manually primed blasters this one requires you to manually push the priming handle back up before firing. If you are then the linkage that disengaged the lock is probably either misaligned or missing.
12:53 - the world needs to see this since blasterhub got the pic wrong and no one could re-assemble their blaster. Thank you for this.
Doh!
No matter how many times I mod a Knockout, I come back to this video when it's time to reassemble the trigger mechanism. This is my sixth Knockout build.
Thanks again Cap'n.
Wonderful video as always sir, this series is a wonderful resource for new modders and I am so grateful you're making it.
The dedication to show us every little detail that no one else would
Just wanted to work on some knockouts i got for some friends, this is way better than the mediocre picture guides i found everywhere else
Captain! This video was a blaster saver! I finally got on the Knockout hype train and wanted to brass one. Upon butterflying the shell, it promptly exploded! All done now, 150 fps half darts with no spring upgrade. Thank you! Bangarang!
Thanks dude! Got that tiny plastic bar with a spring in its home and it works. Anger level reduced by 30%.
Good video. The newer ones have all of the same sized screws. Also, this was the first video that I saw a good picture of the trigger bar. The one on my son's blaster wasn't near as clean with the bends, this made the trigger extremely heavy (I was pulling it with two fingers). I figured it was the trigger bar after confirming it with this video I bent them clean and it fixed the problem.
I guess the new one also has a flaw in the orange spring holder. When the gun is fired it slams against the retainer screw with the wide flange and it breaks it. The solution is to add more padding to the top of the white piston where there already is padding but not thick enough.
Thank Captain - I had minor challenges after electing to make one blue with no Rival on either side and another with Rival on both sides after Ross had the dual pack with blue having Rival painted on left side - first ever.
Thank you! Need this! Excellent Public Service!
I actually discovered something about this blaster a bit ago. There actually is a wrong way to put the rod that connects the trigger to the catch in, provided that you keep the trigger safety in. The u channel bent into the rod appears to be cut out so that the safety can slide back and forth
thank you, really helpful. Couldn't figure out where the piece at 15:35 fit before this video.
literally saved me from trashing my knockout, great tutorials.
This video was so helpful when I was modding the gun and parts just kept flying out.
I can finally call a rival knockout my own (not that easy in Germany 😉) thanks for this perfect video
Thanks for the help, got mine yesterday and it fired the air restrictor out the front earlier so had to open it and put it back in (extrasensory hearing and knockout is loud as is lol)
Edit:god damn it it fired back out again I give up lol, blaster still functions atleast so the video did what it aims to, probably just an issue with the parts themselves in this case. Atleast it's only the air restrictor
With the holiday sales this video is going to become training for many new moders.
This will be very useful, thanks.
The plunger head is a majorly domed piston, I had my suspicions
Just got a kit from XFoxGames and could NOT figure out why (after installation) the blaster wouldn’t fire. Thank you SO MUCH for this.
Thank you I got my one fixed thanks to you
Interesting. More complicated than I thought it would be (or maybe more complicated than it *had* to be)
thanks for uploading this video
Thank you for this! These videos are very helpful
Thx so much this really helped
Been waiting for this one, thanks!
Awesome
Thank you !!!
These videos are a life saver
These disassemblies are great, could you do one on the strongarm? Mine was disassembled and I cauldron never fix it
That's how you do a tutorial video 💪🤓
tks,really helped me
The issue I have is that pulling the big thing to prime the bullet will not load properly, to turn the icon orange. Pulling the lever to unlock the barrel also pops the primer out. Any ideas?
Thanks a lot
Hey Cap, I am currently covering my second (blue) knockout to short darts, how can I remove the AR/ball loader pusher arm thing?
With needle nose pliers, a flat head screwdriver and brute finesse.
Thanks you so very much for this video
This was super helpful!!
Tnx master
very helpful video, keep it up!
Have you considered the Titan AVS-1 and where the problems occur and how to fix them?
I have not, no.
Oh, Lord Captain Master Xavier, wilt thou please consider filming a tutorial on the Rival Finisher? I can't get mine back together. 😭😭😭
I swear these things break themselves in a single dry fire. I have dry fired two of them by accident and both struggle to catch now.
You got any knee pads or shin guards you would recommend
Not really. Still trying to find really nice shin guards myself. Might finally just make some.
@@CaptainXavier how is that magazine backpack going along
so I took out my air resticter and then reassembled it and after one shot the plunger handle went loose so i took it back apart checked out the plunger and the plastic attaching the handle to everything stapped can anyone explain this
12:37 if you don’t put that piece in will the blaster still shoot?
No. Not unless you also remove both of the trigger lock parts.
@@CaptainXavier ok because I lost that piece then found my first knockout and took the piece from the old one and put it in my new one and now it works, thanks for the tutorial and I also subscribed.
Woot
Do you know where I can get a new plunger assembly mine broke and my brother wants to play with it
From another Knockout. I don't know of anyone that sells them separately
@@CaptainXavier ok
Idea for a future build: you built a modular bigshock a long time ago, maybe you could try modularizing one of these? There’s certainly enough air volume for at least a few kinds of ammo....
Altho, you already have the breaking wind. Just remembered that
Hi Cap
Hi
@@CaptainXavier How are you Cap? Hope you had a great Thanksgiving
How ya doing?
8:20 reassembly for me 😂
Mine was jammed and stuck primed, opened it up and it shot open, snapped multiple pieces, complete toast
Saved my nerf gun
Same
My handle wont cocc bacc after letting my little nephew play with it.. any ideas?
It won't what?
Can i put the knockout spring on takedown?
Probably
@@CaptainXavier Am asking this question coz I can't buy spring for nerf . They are not sale in our country.So i can put it in my takedown by taking out the spring from my knockout. My Knockout velocity is more harder then my takedown. I guess I will put the spring hope it work.
I want to see a knockout with a internal magazine mod instead of 4 ammo holders
There are several kits that give it a 3 round inline clip. I have reviewed several of them.
Hi
Hi
Bro the little piece thats near the thing unpull down is broken 😭
All the screws keep stripping what do
Get a slightly bigger screw driver and push harder.
@@CaptainXavier using a 0 and 1 Philips should I go to a 2
Some haven't been stripped yet
Any tips on breaking the seal
Push hard, give it a sharp twist.
@@CaptainXavier figured it out, turns out mine are in BACKWARDS
Hello capitan
hi
Could you do a paintball episode of something??
No...I don't do paintball.
@@CaptainXavier im thinking of selling my nerf arsinal its like 20 blasters and three stryfes and getting into paint ball with my dad still my favorite TH-camr though
Sounds like fun. Stryfes should fetch a decent price.
@@CaptainXavier love the lego chanel you have inspierd me to make my own castle i ised to have the one form 2013 ( the line after the fantasy line)
Hey I have a nerf stampede would you like to buy it from me?
I also have more nerf guns that might be in your interest to purchase
Hi cap
Hi
Anyone else having the problem of the handle not clicking into place
Try pulling the priming handle just a bit.
@@CaptainXavier hi thanks for the reply but now I have another problem ...I managed to close the thing now the problem is the trigger locks up when primed
Sounds like the trigger lock is not disengaging. You are pushing the priming handle back up after priming, yes? Unlike most manually primed blasters this one requires you to manually push the priming handle back up before firing.
If you are then the linkage that disengaged the lock is probably either misaligned or missing.
@@CaptainXavier I didn't put the trigger lock back and it's just after priming the prime moves the metal bar and the trigger gets stuck
But idk how to move it I placed it 100% same as urs but mine keeps getting stuck for some reason
Hey can I get a shoutout I love ur videos
Send me a physical letter. That is how you get a shout out. :)
? What?
thanks a lot
Hi
Hi