Order the new sound kit all worked well during the bench test, then put unit on model, sound worked for a few trial runs, but once I engaged the shift servo, the sound quit. I did follow the instructions and watched the video, for hooking up the wires, (red is positive, brown is negative, and yellow is signal), also observed the proper polarity. Which of course is obvious, seeing as it was working. I at first thought my battery was undercharged, I’m using a 7.2 volt, like the one from my hunia 573.
Hi bro. at 7:20, correct yes need to bind everytime when switch on, BUT, just short press ONE bind button. Pressing BOTH button is only when you are switching between car 1 and car 2. :D
my C-24 and MN-D90 were really early with plastic everything, both now metal axle casings (13 bucks for both, each) and axle gears (11 bucks for both, each), metal drive shafts, B-36 gearbox in the C-24 and 260 motor+gearbox in D90.also A285004 oil filled shocks (12 bucks a set of 4). they can/do nickle and dime you until upgraded, but they're beasts now, getting 2-1/4" of 1 wheel lift (flex) from them, they're hard to stop... definitely not "junk" like the original early releases that they did used to be. for a "winch", a lighter leash makes a good passive one for about a dollar, they fit to the C-14, B-1, and MN-D90 pretty nicely. at 12-13 minutes... looks like a need for some front wheel weight and some cut/trimmed tires. down the center I clip out the rows of 3 dots, and nip the corners off the corresponding (narrower) lugs, gives them a lot more bite, especially with the "deep dish" stock rim mod I've described a few times already (its simple and cheap too).
I remember when WPL first came out. They were cheap too. I have the V2 sound system. It's okay, kinda qwerky. But, WPL is great for the money. I have the C14, C24, B34, B14 I think. JJRC 104? HEMMTT 6 X 6. Have upgraded most with 370 motors, 2-sp trans, metal drive shafts and axle housings with brass gears. When WPL first came out, I was getting for about $30 or so. Then I'd put $50 in upgrades it.
I started getting on the wpl kick,i bought 5 kits in dec and started building them the first 3 different b series i built were good but the c24 was missing a mirror and the c14 is missing the frame rails so it is useless,and i am over the kick of wanting wpl anything now.
You can get all the bits you need from the WPL store. And I’m sure you won’t get charged for the little bits you need. Did you complain to the supplier?
@@TomleyRC i contacted the supplier,basically told me to get bent.i talked to wpl on facebook and they were cool and said they would send me the frame rails if i ordered something from the store.So i need to figure out if i want to order something.they did hook me up with the mirror though,wish i would have opened the c14 before i contacted them about the mirrors.
How are you finding the leaf springs compared to the shocks? Waiting on my C44 KM to arrive direct from WPL...... Only thing is I ordered on 16th Jan right on the start of there holidays 🙄 did say it was shipped so hoping it arrives soon 🤞
I prefer the normal shocks, but like the realism of leaf springs. There is a really simple mod for the stock leafs to get some good flex by using a long screw on each of them (Run That RC, recently made a video), that's probably the best option rather than spending the money on these ones.
@@TomleyRC have to agree, the springs do look a lot more scale...... I've seen "Run that RC" ''s video on the mod...... Done nothing but scour you tube on videos about WPL models (as well as MN) before placing a order for my C44...... Really surprise at how much information there is on this small scale model 👍.
@@Grimm-1507 Yes, WPL is fast becoming a big name in small scale stuff. They are constantly innovating and making improvements, looking forward to this years products! Oh...and lets not forget how cheap some of the stuff is!
Build looking nice over all but the steering link, as u already said, hurts haha. Also Leafsprings looking fantastic but the offroad capabilities are kinda....meh u like more jumping over the rocks than driving =) Also the car is really low, i got a ground clearance of 2,5cm at the axles and 6cm at the middle also with a 2 gear box which i only use ion second gear cuz i got portal axles too and it already got sooo much power !!! And add some weight to the axles ^^ it looking really light, mines at about 1,2kg ready to drive, 52/48% weight front/back about =) makes alot difference. But on lower terrain and smoother surface this one really running better than mine, doing a really really good job there
Do you mind show or mention how you mounted the body on to that chassis, I recently purchased both am I’m trying to mount them without cutting up the bed. The back of the truck bed doesn’t it sit flush with the chassis, it actually sticks about and 1inch or so.
To me the only thing the wpl brand has going for them is their scale looks, they are great in that department but with my last wpl I literally had to replace everything except the body frame wheels and tires to make it a decent rig, I could have bought a red cat Everest 10 or something similar that would have been a way better vehicle for less money than I had to pay to get the wpl to run correctly and not brake parts every time I was out on the trail
@@hervinderpurewal4369 everything in that price point is "rubbish" and needs upgrades to be capable. I would love to see the exception. Point me to it please.
I purchased a WPL C14 after years away from the RC hobby. What lured me on to these trucks was the fact that they could be upgraded and possibilities seemed endless esp of you have a a smidgeon of creativity. Next came the C24 which the C14 donated a great deal of parts to over time. Then the MN99 and Fayee FY003 came most recently and they have also become one truck at this point. After watching this it's tempting to buy another C24 kit and do it all over again! 🙂
nice video, i own a heavy modifed c24-1, 3x c14 for my kids and wife and a D12 to chase other cars and make ppl smile =) wpl makes great cars i can say, u get ALOT fun for the money, alot !!! parts are cheap and there are alot tuning and upgrade parts to customize it your way. Even if i spend the most time with the C24-1 i gotta say the D12 is different, such a fun car for everyone i would say. WPL pls keep doing what u do good !! @Tomley RC great video buddy +1
I have a c24 kit and updated my axles but the front is really tight now can't figure it out almost like the new internals are to long so when wheels are straight it binds
The chip for the servo on the receiver for my C14 fried the second i turned it on. I bought a replacement board directly from WLToys and its lost at sea I guess', Its been a month and a half and Im having a hard time communicating with them and I dont know of anywhere else to get the recieiver, do you? or maybe somebody wants```` to sell their original board after upgrading? I puchased the c14 in October. Thats almost 5 months and I still havent drivin it yet!!! Can anyone HELP
Hello buddy, just notice you made an error with long steering link. The long steering link belong above the knuckles, not under to avoid getting caught with rocks or other stuff that are that height. Then get a spacer to put shorter servo link with a longer screw to reach outside knuckle.
A bit on the instructions said 'you may use your own connector that fits'. Does that mean the red "JST" connectors will work on the circuit board or does it have to be the black "JST SM" (I think that's what they're called) connectors? Nothing but bare 'male' pins on that circuit board so it looks sort of universal, at least for these smaller connectors...
My v2 setup was having power loss for the motor, cannot go forward and reverse, but the sound still there. Servo still works, what should I do? Many thanks
@@RainytheNB yup the motor is the problem, even though we just got it several week ago and played with it not that much. Order a new motor and now it run again, Thanks
A video answering the basics of the electronics would help and compliment the other How To video of the Land Rover getting a new servo etc for novices like me and save on trying to ask you questions all the time. How to correctly plug in the existing wires to the ESC so nothing's shorting/wrong way round, where and what to solder to new motors, what servos are compatible with the 7 4v Lipo battery pack WPL supply with their ESC kits...? I'm puzzled whether a 4.8v to 6v servo is compatible with the 7.4v Lipo battery you supplied with the ESC kit for one thing. And before you say it, I actually emailed WPL...for a company whose website state they provide aftersales support whether I have bought from other sellers or not all someone replied with was contact the seller...
A simple TH-cam search of ‘WPL Electronics’ should answer your questions. I would love to have the time to answer every question thoroughly, but I don’t unfortunately. Between TH-cam comments and Facebook messages it’s hard to keep up.
A285004 oil filled shocks, shorten the lower eyelet about 1/8", get lighter coil springs at a good hardware store (had to trim shorter and make ends smaller diameter to fit the shocks). they mount to the inboard holes so they're tilted in some, but getting 2-1/4" of 1 wheel lift using stock plastic C-frame 4 links.
Hey! Im planning on buying the C24-1. Im thinking on buying a 30A Mini Brush ESC. Questions: Do you need to upgrade the TX/RX when you install a ESC? Does the C24-1 already come with a ESC in its all stock form? Thanks, hopefully you can reply. New Viewer/Subscriber from the Philippines! Edit: The reason that i wanted to add a ESC because i thought of having more control in the speed.
Cool little truck you built up, but the sound still reminds me of a diesel when it drops to idle. Funny, quite a few of the Russian trucks use a gas motor till you get to the much bigger military versions and they like making those so maybe that's more of what they are used to hearing and seeing. US went to almost all diesel in our trucks but over there maybe the extreme cold has something to do with the mix of engines they use.
Yes, the low rumble of a V8 ‘gas’ does have some similarities to the Diesel knock. These sound better through the old Heng Long tank speaker, but that’s a bit big to hide!
That Hilux looks great 👍👍 I think WPL is one of the best things happened to this hobby and improvement of the quality and the customer service is fantastic.
love the truck but never can get the sound love hearing the rc thats what i think rc is all about not a bit of sound but the rc its self i just havent found the good desial sound for my redcat sherdder its a beast check out the redcat sherdder for me my friend i love you videos i am trying to watch them all they are all great videos an you tell it like you fill an i like that about you an thats is the way to be so please never change my friend but check out the redcat sherdder its a beast with a few upgrades later an keep on crawleing love your videos make more
These are definitely fun. Now you've got me curious about that electronics kit... Super cheap way to get into building RC cars for the uninitiated. And then you're in deep and making videos about all your in too deep mods
Normally really like your videos but I found the "run" a bit painful to watch. I really like the idea of the sound but in actual fact it's just a bit pants! And still sounds like a diesel? Maybe a little easier terrain next time to actually show off what the truck can do rather than what it can't 🤷♂️. Any way, I still love watching your channel and I will be back for more next time 😉
No worries dude, it's nice to see some constructive criticism, people are often too nice lol. Anyway, this was a brand new place i'd never been to before, so was a bit trial and error. Along with putting the steering link on wrong, it was the best I could do. I have always said these are decent 'trail trucks' rather than crawlers. Although I think the winch test will show a few people its capabilities. As for the sound, i guess the camera doesn't do it too much justice, and also because the speaker is now a lot smaller, you can't quite get the quality of something like the ESS Dual. Anyway, no offence taken ;)
I call them, tinkerers dreams, out of the box, even the kit version, has much room to grow, and nobody would ever claim that they were in any way a matchup to pricier big brands, but by the time you fully upgrade one of these to every feature it can have, your still under the big brand in the same scale, and can outperform them
Man if you're still in any kind of partnership with wpl why don't you get talking with them about becoming a UK distribution center for them? I bleeding hate waiting for China mail! You have the space for stock with your unit!! 🤣
Just got the metal shocks and drive shafts can’t wait to do my first non cosmetic mod to mine!
Stock shocks better in my opinion should waterproof yours
@@ps4tings545no way u prefer stock shocks instead of oil ones
Order the new sound kit all worked well during the bench test, then put unit on model, sound worked for a few trial runs, but once I engaged the shift servo, the sound quit. I did follow the instructions and watched the video, for hooking up the wires, (red is positive, brown is negative, and yellow is signal), also observed the proper polarity. Which of course is obvious, seeing as it was working. I at first thought my battery was undercharged, I’m using a 7.2 volt, like the one from my hunia 573.
That was awesome! I was amazed at how much the soundboard added to the crawler video experience. Nicely done.
I was just about to write about the steering arm when you said it yourself.
Awesome job moding the truck, dude! It looks fantastic! 😃
The board looks great as well!
Yes, so much more ‘tech’ than the early days!
bloody great value for low budget fun and big Fun at that , thanks for sharing and bringing to our attention Tomley , your the Wl toy man :-))
This is so exciting for some reason.
Hi bro. at 7:20, correct yes need to bind everytime when switch on, BUT, just short press ONE bind button.
Pressing BOTH button is only when you are switching between car 1 and car 2. :D
Cheers Edward... I think i was using the board set to 'Car 2'...
@@TomleyRC I see. Wokay
Great what you can get out of the mWPL :) I am also very satisfied with my Ural B36 :)
my C-24 and MN-D90 were really early with plastic everything, both now metal axle casings (13 bucks for both, each) and axle gears (11 bucks for both, each), metal drive shafts, B-36 gearbox in the C-24 and 260 motor+gearbox in D90.also A285004 oil filled shocks (12 bucks a set of 4). they can/do nickle and dime you until upgraded, but they're beasts now, getting 2-1/4" of 1 wheel lift (flex) from them, they're hard to stop... definitely not "junk" like the original early releases that they did used to be. for a "winch", a lighter leash makes a good passive one for about a dollar, they fit to the C-14, B-1, and MN-D90 pretty nicely.
at 12-13 minutes... looks like a need for some front wheel weight and some cut/trimmed tires. down the center I clip out the rows of 3 dots, and nip the corners off the corresponding (narrower) lugs, gives them a lot more bite, especially with the "deep dish" stock rim mod I've described a few times already (its simple and cheap too).
Yes, weights and more traction. I cut some B36 tyres, but wanted to go with the more scale ones on this build. But could do with a bit of work
Great video mate. It looks like the steering rod may be on the bottom tho. That should be on top
WPL SUPER FAN! I am indeed
Me too lol
I really like the body on these, because I love the classic style pickups, but I'm just not into the smaller scales.
I see you're a size queen...🤣
@@Hjerte_Verke Size isn't everything though, it depends how you use it.
Awesome review and information,great little RC.
I remember when WPL first came out. They were cheap too.
I have the V2 sound system. It's okay, kinda qwerky. But, WPL is great for the money.
I have the C14, C24, B34, B14 I think. JJRC 104? HEMMTT 6 X 6.
Have upgraded most with 370 motors, 2-sp trans, metal drive shafts and axle housings with brass gears.
When WPL first came out, I was getting for about $30 or so. Then I'd put $50 in upgrades it.
very cool little truck and sound kit. great video bud
Thank you
I like the little things I did get one when they first came out but to me that’s part of the fun upgrading them
exactly
Yes, upgrading and making them your own is where the fun really is
I started getting on the wpl kick,i bought 5 kits in dec and started building them the first 3 different b series i built were good but the c24 was missing a mirror and the c14 is missing the frame rails so it is useless,and i am over the kick of wanting wpl anything now.
You can get all the bits you need from the WPL store. And I’m sure you won’t get charged for the little bits you need. Did you complain to the supplier?
@@TomleyRC i contacted the supplier,basically told me to get bent.i talked to wpl on facebook and they were cool and said they would send me the frame rails if i ordered something from the store.So i need to figure out if i want to order something.they did hook me up with the mirror though,wish i would have opened the c14 before i contacted them about the mirrors.
siri have notice your leaf spring which is cool.do you have a video featuring the leaf spring in this truck?
th-cam.com/video/Ne9BH_l6LOc/w-d-xo.html&app=desktop
I love this c24 soo much. Trying to go all metal with one. Love em too
Man. WPL has really improved, there Game,in the years, nice review on ESC,
Looking forward to my first soon,, very soon, .
Yes, they are producing some decent rigs now!
Do you have a build video of your leaf spring set up? Trying to get mine setup with leafs. But not getting anywhere near the height or flex you have.
How are you finding the leaf springs compared to the shocks? Waiting on my C44 KM to arrive direct from WPL...... Only thing is I ordered on 16th Jan right on the start of there holidays 🙄 did say it was shipped so hoping it arrives soon 🤞
I prefer the normal shocks, but like the realism of leaf springs. There is a really simple mod for the stock leafs to get some good flex by using a long screw on each of them (Run That RC, recently made a video), that's probably the best option rather than spending the money on these ones.
@@TomleyRC have to agree, the springs do look a lot more scale...... I've seen "Run that RC" ''s video on the mod...... Done nothing but scour you tube on videos about WPL models (as well as MN) before placing a order for my C44...... Really surprise at how much information there is on this small scale model 👍.
@@Grimm-1507 Yes, WPL is fast becoming a big name in small scale stuff. They are constantly innovating and making improvements, looking forward to this years products! Oh...and lets not forget how cheap some of the stuff is!
Watching your old uploads 👊🏻👍🏻
Build looking nice over all but the steering link, as u already said, hurts haha. Also Leafsprings looking fantastic but the offroad capabilities are kinda....meh u like more jumping over the rocks than driving =)
Also the car is really low, i got a ground clearance of 2,5cm at the axles and 6cm at the middle also with a 2 gear box which i only use ion second gear cuz i got portal axles too and it already got sooo much power !!! And add some weight to the axles ^^ it looking really light, mines at about 1,2kg ready to drive, 52/48% weight front/back about =) makes alot difference.
But on lower terrain and smoother surface this one really running better than mine, doing a really really good job there
Do you mind show or mention how you mounted the body on to that chassis, I recently purchased both am I’m trying to mount them without cutting up the bed. The back of the truck bed doesn’t it sit flush with the chassis, it actually sticks about and 1inch or so.
To me the only thing the wpl brand has going for them is their scale looks, they are great in that department but with my last wpl I literally had to replace everything except the body frame wheels and tires to make it a decent rig, I could have bought a red cat Everest 10 or something similar that would have been a way better vehicle for less money than I had to pay to get the wpl to run correctly and not brake parts every time I was out on the trail
Must not have been a km kit. Those are pretty dope. Their rtr is junk tho, I agree.
The early kits were not perfect, but you shouldn’t need to spend loads of money on them. Better driveshafts and the metal gears are the essentials
@@hervinderpurewal4369 everything in that price point is "rubbish" and needs upgrades to be capable. I would love to see the exception. Point me to it please.
Hervinder Purewal Well I actually said ‘the early’ ones 😉👌
@@theskeptik1 exactly very well said man!
Is there any mechanical difference between the white one and the red and blue ones on eBay ?
White one has a better gearbox/gearing, and metal gears. The Blue & Red may also have metal gears.... but it depends if they are a new batch or not.
My new go to instead of the old 30a red esc and flysky receiver. Good stuff!
Yes, so easy now to throw the board in and go... all with ones Transmitter!
but the remote is ugly. if i have the time i retrofit the WPL remote electronics into a nicer looking remote like Austar haha
@@EdwardChew yes I prefer regular size transmitter. But it's not bad because it's easy to travel with a small tx
A nice setup!
I purchased a WPL C14 after years away from the RC hobby. What lured me on to these trucks was the fact that they could be upgraded and possibilities seemed endless esp of you have a a smidgeon of creativity. Next came the C24 which the C14 donated a great deal of parts to over time.
Then the MN99 and Fayee FY003 came most recently and they have also become one truck at this point.
After watching this it's tempting to buy another C24 kit and do it all over again! 🙂
100% agree mate.... it's not always about how they perform out the box, it's how enjoyment you get out of them
Hi tomley could you show me how you have mounted the wpl winch please
Love the build.
nice video, i own a heavy modifed c24-1, 3x c14 for my kids and wife and a D12 to chase other cars and make ppl smile =) wpl makes great cars i can say, u get ALOT fun for the money, alot !!! parts are cheap and there are alot tuning and upgrade parts to customize it your way. Even if i spend the most time with the C24-1 i gotta say the D12 is different, such a fun car for everyone i would say. WPL pls keep doing what u do good !! @Tomley RC great video buddy +1
I have a c24 kit and updated my axles but the front is really tight now can't figure it out almost like the new internals are to long so when wheels are straight it binds
I had to upgrade my esc after I installed a 370. The stock one kept stalling my truck after a few mins 😂
whats it like buying a wpl c14 kit from china because finding one in the uk for under £35 is almost impossible so what are the customs like
I've never been charged customs form Banggood
The chip for the servo on the receiver for my C14 fried the second i turned it on. I bought a replacement board directly from WLToys and its lost at sea I guess', Its been a month and a half and Im having a hard time communicating with them and I dont know of anywhere else to get the recieiver, do you? or maybe somebody wants```` to sell their original board after upgrading? I puchased the c14 in October. Thats almost 5 months and I still havent drivin it yet!!! Can anyone HELP
the grub screws for my C44 always come loose even with locktite
I’ve never had an Issue. Only when I forget to put loctite on the driveshaft ones
@@TomleyRCthe ones on the spool gears seem to try and back out with locktite. Luckily, diff cover is easily accessible with 4 screws.
Hello buddy, just notice you made an error with long steering link. The long steering link belong above the knuckles, not under to avoid getting caught with rocks or other stuff that are that height. Then get a spacer to put shorter servo link with a longer screw to reach outside knuckle.
Yes you are right... I changed it soon after and it made some much difference. I wish I'd realised at the time!
@@TomleyRC glad you caught your error 😁
@@Modifier-RCs me too haha
anywhere to get hold of this 3rd generation stuff?
Well, i want to say the official store, but that's closed for now
HEY CAN THAT SUSPENSION FIT ON MY WPL C24 CHASSIS???!!!!!! PLSSS ANSWER
This is a 'B' Chassis. Takes a bit of work to get it to fit
A bit on the instructions said 'you may use your own connector that fits'. Does that mean the red "JST" connectors will work on the circuit board or does it have to be the black "JST SM" (I think that's what they're called) connectors? Nothing but bare 'male' pins on that circuit board so it looks sort of universal, at least for these smaller connectors...
My v2 setup was having power loss for the motor, cannot go forward and reverse, but the sound still there. Servo still works, what should I do? Many thanks
hmmm not sure. Sounds like and issue on the board
Try swapping your motor out.
@@RainytheNB yup the motor is the problem, even though we just got it several week ago and played with it not that much. Order a new motor and now it run again, Thanks
@@perbowowicaksono252 No problem. I've had that problem before.
A video answering the basics of the electronics would help and compliment the other How To video of the Land Rover getting a new servo etc for novices like me and save on trying to ask you questions all the time.
How to correctly plug in the existing wires to the ESC so nothing's shorting/wrong way round, where and what to solder to new motors, what servos are compatible with the 7 4v Lipo battery pack WPL supply with their ESC kits...? I'm puzzled whether a 4.8v to 6v servo is compatible with the 7.4v Lipo battery you supplied with the ESC kit for one thing. And before you say it, I actually emailed WPL...for a company whose website state they provide aftersales support whether I have bought from other sellers or not all someone replied with was contact the seller...
A simple TH-cam search of ‘WPL Electronics’ should answer your questions. I would love to have the time to answer every question thoroughly, but I don’t unfortunately. Between TH-cam comments and Facebook messages it’s hard to keep up.
Great video bro 🥰🥰😍😍😊😊☺
Hey where did you mount the speaker on your c24?
As it's the small V3 one, it fits nicely in the cab out the way
Did you have to cut anything to put it there?
By the way love your channel its been very helpful.
Benjamin Moss It is very small, so fits in with no cutting needed
Awesome bro thanks 😆👍
Nice how much is this upgrade as not on eBay thanks Tommy regards pete.
I just ordered one will I get this new version do u think
Depends where you order from I think. Hopefully iy will be the newer one
How could we achieve some form of legit drag brake for this little rig, any ideas? wonder if you could mod it with a dig?
The V3 also has drag brake in first gear, and if your running a single speed setup, you can still access this by switching to first on the controller
Yes, cool design 👍🏻
Any way to disable the indicator sound?
Did you paint this in those colours?
Yes, primer grey with some weathering
Mate have an idea on some good suspension? Note the one that they have BTW I have a kit and it's awesome
A285004 oil filled shocks, shorten the lower eyelet about 1/8", get lighter coil springs at a good hardware store (had to trim shorter and make ends smaller diameter to fit the shocks). they mount to the inboard holes so they're tilted in some, but getting 2-1/4" of 1 wheel lift using stock plastic C-frame 4 links.
I tried the one transmitter with 3 boats trick ! Cost me a boat ! Still making me laugh now
It used to be the case that if you wanted a competent leaf-sprung hardbody HiLux, you had to go to Tamiya - and pay their prices.
Not any more!
Exactly Del, I mean they are no Tamiya High Lift.... but then they are not £300+
@@TomleyRC I can´t understand how anyone could object to there being more choice in the marketplace.
Where do you get a chassis only?
Hey! Im planning on buying the C24-1. Im thinking on buying a 30A Mini Brush ESC.
Questions:
Do you need to upgrade the TX/RX when you install a ESC?
Does the C24-1 already come with a ESC in its all stock form?
Thanks, hopefully you can reply. New Viewer/Subscriber from the Philippines!
Edit: The reason that i wanted to add a ESC because i thought of having more control in the speed.
You need a separate new tx/rx as the stock esc is integrated with rx
I know you mentioned it but what kind of winch did you use ¿¿
WPL
Cool little truck you built up, but the sound still reminds me of a diesel when it drops to idle. Funny, quite a few of the Russian trucks use a gas motor till you get to the much bigger military versions and they like making those so maybe that's more of what they are used to hearing and seeing. US went to almost all diesel in our trucks but over there maybe the extreme cold has something to do with the mix of engines they use.
Yes, the low rumble of a V8 ‘gas’ does have some similarities to the Diesel knock. These sound better through the old Heng Long tank speaker, but that’s a bit big to hide!
That's great. Love the sound card and the remote operating lights.
For the money they are good. Getting better every time as well
What WL toys u got there? Is that A949?
Mate, u using metal axles as well?
Is the c24-1 rtr fully proportional?
I turned everything on how to bind?
Have you got the car1/car2 set to car 1? Press the button on the controller as per the instructions
So are these water proof
They can be, but you need to put your own waterproofing on
My wife stripped the gears after a few minutes out of the box. I do have an all metal transmission on the way.
That's realism for ya. 1/1 trucks have breakdowns too, broken axles and destroyed differentials.
@@Hjerte_Verke I fear the little truck that couldn't met mister garbage can!
Great sound....like that...I really like the c24 body.
The MN s are also good 🤙🏽
Why does the body lean way to the left side all the time, even when you're not driving it?
That Hilux looks great 👍👍
I think WPL is one of the best things happened to this hobby and improvement of the quality and the customer service is fantastic.
Yes, they have given lots of people an entry level ‘scale’ rig. Still people are quick to dismiss them 🤷🏼♂️
Nice truck
Are the v.2 and v.3 transmitters finally full promotional with the v.2 or v.3 board??
V2 and V3 only work on the respective boards, and they are both fully proportional
@@TomleyRC thank you💯
love the truck but never can get the sound love hearing the rc thats what i think rc is all about not a bit of sound but the rc its self i just havent found the good desial sound for my redcat sherdder its a beast check out the redcat sherdder for me my friend i love you videos i am trying to watch them all they are all great videos an you tell it like you fill an i like that about you an thats is the way to be so please never change my friend but check out the redcat sherdder its a beast with a few upgrades later an keep on crawleing love your videos make more
Pasti-dip! One thing I was worried about was how fragile these were to moisture. It's a game changer with that external esc port.
Yes, it’s an awesome bit of new kit
Why would you need 2 ESCs? If the board has a built in ESC, why would you need an external ESC?
It's so you can use it just as a Sound Kit...
Just my opinion, but it seems WPL needs to do a bit better job of syncing the motor sound with what the wheels are actually doing.
Yes it’s a little off. No way of manually adjusting it either. But it’s better than no sound 👍🏻
It looks like the Stamford Legend Colin Furze's truck :D
Yes, I could deliver it to him, he’s only 30mins away from me 😎
@@TomleyRC Oh!, you're local to me as well then if that's the case!, Colin lives the other end of the same town.
@@daviddorson5111 N Hykeham
@@TomleyRC Not far at all then!
hello friend wonderful video
These are definitely fun. Now you've got me curious about that electronics kit...
Super cheap way to get into building RC cars for the uninitiated. And then you're in deep and making videos about all your in too deep mods
Haha...yes true. For $35 you have a lot of ‘tech’ 👍🏻
Good day for a "run"!
Yes....not from my legs haha
They are cool little rigs.
What is this truck speed
These lil guys run great when set up right
Yes, got make a few tweaks usually, but certainly nothing to hard
That 'engine' noise is awful, slightly stressful even. The truck looks good though.
I suspect the soft coating is TPE, which turns very sticky after a few years. I wish manufacturers would stop using this 'timebomb' material.
That looks good and I deffinetly think that the steeringvarm wasntvon right
Flocked finish on the controller
Looks like it, but it’s just soft touch plastic. Nice though 👍🏻
awesome! 👏👏👏👏
good job.
I boght mine off of amazon for 60 bucks im sure im gonna be satiisfied
fun rig
Looks great and fun to drive however I think the realism of the sound is kind of lacking, when applying throttle the sound dosent rev up.
Yes, I guess it may need the ability to calibrate to the transmitter. I'll feedback to the WPL guys.
Normally really like your videos but I found the "run" a bit painful to watch. I really like the idea of the sound but in actual fact it's just a bit pants! And still sounds like a diesel? Maybe a little easier terrain next time to actually show off what the truck can do rather than what it can't 🤷♂️. Any way, I still love watching your channel and I will be back for more next time 😉
No worries dude, it's nice to see some constructive criticism, people are often too nice lol. Anyway, this was a brand new place i'd never been to before, so was a bit trial and error. Along with putting the steering link on wrong, it was the best I could do. I have always said these are decent 'trail trucks' rather than crawlers. Although I think the winch test will show a few people its capabilities. As for the sound, i guess the camera doesn't do it too much justice, and also because the speaker is now a lot smaller, you can't quite get the quality of something like the ESS Dual. Anyway, no offence taken ;)
I call them, tinkerers dreams, out of the box, even the kit version, has much room to grow, and nobody would ever claim that they were in any way a matchup to pricier big brands, but by the time you fully upgrade one of these to every feature it can have, your still under the big brand in the same scale, and can outperform them
Man if you're still in any kind of partnership with wpl why don't you get talking with them about becoming a UK distribution center for them? I bleeding hate waiting for China mail! You have the space for stock with your unit!! 🤣
I so wish they came with a more stock sounding 4cyl engine. :(
4 cyl Diesel 👍
@@TomleyRC nah. I want gas 4cyl sound, like my 1:1 1980 had.
"With NEW LCG steering link!!!"