WPL RC Build Tips #4 - Installing the RES-V3 (previous known as Sound System V3
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- 🍟 "Buy Me a Coffee" if you find my video helpful!
www.buymeacoff...
🙌 Join the Official WPL RC FB Group 👉 bit.ly/3uL5YJ8
► Official store : www.wpl-rc.com/
► Link to RES-V3 - www.wpl-rc.com...
► Video for soldering capacitors to reduce intereference
• Soldering 104 Capacito...
► Official page - / wplrcofficial
► Official Group - / wplrcofficial
► Official D12 Group - / officiald12group
► Camera : Osmo Pocket
- Official Store : click.dji.com/...
► Get 10% off your holiday Booking.com via my discount link, : www.booking.co...
What an amazing piece of the the RES is!
I did not read the instructions. I followed your video to the T. Thank you. It works great, Diesel sound is amazing. Its not as fast to react on trigger as the original one but I have to get used to it.
yea diesel engines have longer stroke, heavy internals, lazy reaction
Hello, my friend! I am here because I am finally getting started on my truck 🎉 I have forgotten everything, so I'm here to watch all of the videos again, lol. (I'm building a C24 kit)
Well, I finished that C24 KM and it got stolen 3 days later, so I am staring over again, hhhh. I got stuck with the plain -1 kit this time and it sucks as compared to the KM.
Masa beli, perasan juga ada pengguna yg tak sengaja burned/fried papan ni. Bila dah sampai, tonton vid ni sebagai panduan. Syukur first try tanpa masalah😌 terima kasih👌
Very good and helpful video. It all makes sense now. I bought the ESC alone with no instructions.
Great explanation Edward. Thanks a lot, it is very helpful. Now I am going to open up my RES-V3 and to install it in my C44 😸😸
That's what mine is going in also👍
Hello
What about turn signal taillights and reversing lights, when there are only sockets for the front lighting? I have an MN Models MN99s gray 😸
This is so useful. Thankyou Edward.
This Is a really great and informative video.!! I want every second..!! Awesome stuff my friend..!!
MY C24-1 is perfect, I would like the sound an winch but i don;t need to go fast. Little more torque would be ok but really it climbs almost straight up an down hehehe. I freaking Love it.
Looking forward too my first WPL, soon, , nice work on the video very understandable, , 💯
Thanksss bro! Looking forward to that :)
Nice video! I just fried my v3 esc. 😂 I didnt notice that the switch and motor port were switched as i assembled it back to the truck. As i turn it on. It smoked. 😂😂 Gotta order an esc again.
Hahaa yes im worry about that one too
I Have a few questions
1. What improvements does this Res V3 & controller have, over the stock proportional receiver & remote for C54-1?
2. In terms of throttle modulation & sensitivity, when we pull/push the throttle trigger. Is it much smoother ?
3. Will it work with the stock counter rotate gearbox + 260 motor ?
4. What difference is the Diesel vs Petrol receiver set? In terms of performance/throttle response etc
Nice, I'm planning to install that on my c24
Wohooo
and this video for how to hide in inside c24
th-cam.com/video/LJz3Dl2knac/w-d-xo.html
Great video thanks a lot. Do I have to press the bidding button every time I switch on?
Yeap everytime bro and it's easy 😁
Very helpful video. Just bought mine and had a mild panic attack when I thought that this was only a receiver.
Thanks for the video. How does this board mount in a D12 chassis? The mounting hole doesn’t seem to line up anywhere…
this board does not have a hole at all. you can trim away the mounting pole on the d12 to fit this
Thank you for the video men big help for my kit
How would you go about connecting the 6-pin connector from a stock MN99s to the 4 pairs of JST PH connectors on this board?
Please do not use connectors from MN. they are reversed. you risk frying it
I'd like to get that full set up some day
Thanks Edward!
Do you see an alternative combo (Receiver, esc, Radio) on thr market for the wpl c24? I want to convert my non Proportional RTR into a proportional one. Souny, winch, 2gearbox not needed.)
Hmm if combo no man :-)
Only WPL make such combo, and at low price. Another months later we will have another powerful combo.
Hey. Nice name for the sound system! 😁
Please confirm orientation of servo lead plug-ins to the rail. it appears on your video, that you plug them in horizontally, however the diagram appears to show a vertical plug-in. Which direction is correct?
Please follow the instruction in the video as that's showing you that it works horizontally.
The "vertical plug-in" you mentioned in the diagram just accurately reflects the orientation of the pin plastic mount on the board, not the plug orientation, and there's no way to alter this on the physical board as it's a standard pin in the industry
does this work with mn99s? or can u suggest one and make a tutorial for it.. thanks in advance..
Nice vídeo bro 😂😁😎😍
Hey Edward! Where can we get the LEDs for the rear (and turn signal) lights that plug into the RES-V3 and have the proper 2 pin white plug? My C34 LED headlights have a large black servo connector plug and do not fit.
Excellent explanation!
Awesome piece of kit Ed, any idea when they will back in stock
chasing on that :-) Please click the NOTIFY WHEN AVAILABLE button on the right of the page ya
Insightful, thanks!
Can you trim the steering? Mine just steer way too far that the steering rod pops out so easily.
Ok send us a video at Sales@wpl-rc.com to have a look
good job
What voltage LED are to be used for those turn signal option? And size 3mm or 5mm? Thanks
I bought a replacement for my son b24. Upgrade using a cheap micro servo .. esc 20a and dumborc transmitter. Still trying to figure out how to fit in. When i found this.. i saw on your store i go like " why did i dont see this earlier !" Since i dont want the replacement go on wasted .. im still trying figure it out how to.
Dear WPL I recently received the new edition RES-V3. It looks a little different as the power inlet is clearly red, nice touch. My question is I would like to mount the board in the battery tray and battery in the bed of my old B1. Can I use some cushion under the board e.g. electric tape or foam and hot glue it in place? Thanks in advance.
Edward
yeap the red connector is due to the feedback. 🙂 of course you can.
Thank you Mr. Chew for your speedy answer. 🥳
Hi Edward, great video, well done.
I desperately need your advice, I have upgraded my WPL RTR B36 with all metal transmission, RES-V3 board, 2-speed gearbox and motor, speaker in roof of cab, but the new V3 board is larger than the old one and I cannot get the cab back onto the chassis rails it will not sit level on the rails, do I have to modify the cab to get it to fit snugly?
Look forward to your reply.
Hmm what is blocking it from closing? some connector? you may email us at sales@wpl-rc.com or post to the official fb group for help :-)
Just got mine in. Soon as I plugged in my battery the correct way boom up in smoke. Lol 🤣
That means it's not plugged in the right way
@@EdwardChew red to positive black to negative.
370 single speed motor can use this set?
Of course
Very nice.but can you made the light on/Off? Or stay all the time on? Thank you
Yes long press the top button. manual here :)
www.wpl-rc.com/pages/instruction-manual
Hey....i want to ask ...how many plug,s can be installed for led light?
Very informative..thanks
Can I connect one of yours 15A brushed ESC to the winch output on RES-V3 to power a more powerful winch?
Cannot bro. It does work that way
Cool video very useful… I have a question: can I use the V3 sound sistem with the 1500 mah battery from wpl?
Hallo Edward, ich finde das Res v3 und deine Videos echt super. Ich habe aber mal eine Frage. Gibt es eine Möglichkeit das vordere und das hintere Licht zu koppeln, also Licht an und vorne und hinten leuchtet? Ich baue am B36 Ural
can you parallel the light source from the front to the back. but it will be dimmer
Ich habe schon versucht an die Scheinwerfer ein paar LEDs für das Rücklicht anzuschließen aber dann leuchtete überhaupt nichts mehr. Gibt es noch eine andere Möglichkeit das Rücklicht anzuschließen?
Lg Klaus
Hi! im wondering if this works for MN86KS???
Can I connect a res-v3 with the180 motor gearbox directly?
first of all congratulations for the very complete and useful video, could you tell me if dual lithium batteries have an ampere limit? thank you
What do you mean "dual lithium batteries have an ampere limit" ?
@@EdwardChew forgive me, try to be clearer, can I use batteries with 2000 mAh?
@@5t3f4 yes u can
@@EdwardChew Great !!! thanks and keep it up !!! a greeting from Northern Italy
Hi edward , just bought another res v3, but this time the winch control isn't working properly , it keep turn on by itself , even when not binding to transmitter, any idea what's wrong with it ?
please email to sales@wpl-rc.com 🙂
send clear pics of how it's connected including a video. in most case it's connected wrongly.
Does those light plugs works on an original mn99s? Is it plug and play?
Is it safe to use 2 rechargeable 4.2v batteries to res v3 controller?
Cannot.
Thank you 😊 v3
i just buy the rtr b-24 i am wanting to change to sound system v3 as is much better can i too upgrade the motor from standard 180 to the 370 ?? will it fit inside the b24 ?? also second question is if now im going to replace the old electronic for this new v3 do i need to make modification for the steering servo to go inside or does it just screw in easy no modification required??? thanks edwardRC
if you want to upgrade to 370 motor, get the dual speed gearbox together ya, then yes it fits. if your b24 rtr is proportional then don't need to to change steering servo, use the one comes with it
Hi Edward, nice job explaining the installation of the V3 electronics.
Wanted to know if you had a video of installing the larger metal geared servo from wpl in the b16 truck?
As it is larger than the original and I wanted to know if there was any easy mod to get it fitted.
Thanks regards Ryan
Larger servo means the 25g one?
Nope. The 17g metal gear servo no issue and adequate for me 😁
Yes the 25g?
Thanks for responding
I didn't realize it was bigger than the stock when I ordered it.
Thanks 😊
hello sir. I have a question regarding my v3. when i turn on the switch my motor turn by it self without binding from the transmitter.
email the video to sales@wpl-rc.com ya
@@EdwardChew thank you sir. i already emailed.
Hi I see there is no esc? What is the point of the brushless esc that wpl recommends?
ESC is built into this receiver. it's an all in one receiver.
We didn't recommend brushless esc but this RES-V3 is able to control and external BL ESC and you still have the engine sound
@@EdwardChew okay thank you very much, makes sense now
Very nice. But can made the light on/off ? Thank you
yes you can
Res v3 ,is it compatible to tamiya rock socker rc 1/10 scale?
not recommended
Hi Ed could you help me please - my stock electronics for the d12 are losing signal is there anyway to fix this issue or do I need to buy a complete new board ?
open your remote, make sure the antenna is away from the board
open your d12 front cab, make sure antenna is away from the board
if that doesnt solve. may need a new receiver
Thanks for info 👍👍👍🇲🇾🇲🇾🇲🇾 10:42
May I know How do I connect additional spotlight to this circuit, since the headlight port will be taken?
run through an adjustable step down BEC from battery to output 3V for LED. or getting the right resistor resistance value.
Do you know how to pair a remote on a wpl with the xx-162r board
they auto pair. just them remote and receiver on
@@EdwardChew thanks, i just had to switch batteries and then the auto pair worked.
Can i use this transmitter for my mn86ks model? If not can you recommend somethinh similar to v3 (with petrol/diesel sounds)
theatrically yea but be careful with polarity when you are using any plug from MN. try checking in the MN fb group see if anyone has done it. I havent build mine :D
Thank you this is help me
Can you help me, i have all the commections correct and polarity are correct. But the motor is the only one that do not run and make any engine sound. I tried 2 kinds of motor one is 180 and one is 370 all connection worked we except for the motor. What is wrong?
Hi. no sound and no throttle?
Pm me here
facebook.com/wplrcofficial
hey my d12s transmitter is acting crazy so what happened was when i pressed the throttle back it went in reverse when you pull the throttle back it’s supposed to go forward can you help me figure it out i’m kinda confused
Just swap the motor wires bro
@@EdwardChew i can’t get any new wires tho
@@carmen_playz_2112 dont need new wires. just desolder the 2 wires on the motor terminal, swap it to each other terminal
Can i use another radio for use with this esc?
Nope
Hello, great video, was wondering where do you buy the wire that connects the motor to the circuit board, i only have jst plug wires, what type of wire did you use?
hi bro. here
www.wpl-rc.com/collections/electronics/products/wires-connectors
@@EdwardChew thanks man
Can I use it with different receiver.?
Nope
Is it possible to connect with 180 standard wpl moto? Or need to upgrade? Please advise
I read un the wpl web can make interferencia with other motor, Will be updated with 370.
Wow
How do you get the tail light port to work, mine has no voltage at any light ports except the headlight port, any idea?
tail light port is actually reverse light. So only has voltage when you push the throttle trigger for the 2nd time
Hello sir..how many meters away the remote can go?please enlightenment sir?
it varies to environment. How far you want to go with your crawler?
Tq sir👍
Hello. I just installed this. As i turn on the remote and car and bind, i have always to switch to other car. Why?
??? that means your Car Switch jumper on the receiver is on Car 2
@@EdwardChew no. I tryed both position. In every position of jumper after binding lights on the car goes off. Always need to press both buttons on remote to switch to "other" car and i have only one.
@@abzyberdy that's weird. u can send a video to sales@wpl-rc.com
Clearly showing the jumper position
Helo edward, a quick question, bcuz im using after market motor/dynamo, can i use the same capasitor 104 for them oww different capasitor? Im gonna use brushless 2435 motor.
brushless need no capacitors
@@EdwardChew oww owky, tq.. If theres anything tht i dont so sure about.. Ill ask u.. Ahaha tq
So if i use the 2435 motor with 3300kv.. It should be ok?
@@deeondaryl5968 ok or not depends if your esc can support it or not. and i dont know what car you gonna put this in.
@@EdwardChew Thank you for replying!
Im using a 60a esc and
Planning to install it on wpl c24 and mn98
It works with different radio?
Nope. WPL's own V3 only
Hey Edward, will a battery with a red JST connector work with the black connector included in the V3 kit?
Yeap you can. just watch for the polarity every single time you plug it in
@@EdwardChew Thanks for the reply. There's sooo many types of connectors now, it's mind boggling. Black, red, white and yellow, blue ones too I think.
Does it work with the stock remote?
No
Will this work w a drzv2?
That sound system waterproof or not ?
Not waterproof
mantap
Can I use it on D12?
Hi how to install it with brushless motor with 2 speed gearbox
Here
th-cam.com/video/Iizsy6xHW8k/w-d-xo.html
@@EdwardChew tnx
can i use lipo battery??
yeah sure. just make sure it's 2s or 3s
Will the connectors come with sound kit itself ?
Yes as of now 18th nov they will come with connectors. details here
www.wpl-rc.com/collections/electronics/products/r-e-s-v3
Sir will it work with 7.4v 2200 mah 25c /2s lipo battery?? Please reply
Did you find out ??
can it use 370 motor??
Yes
Hi Edward,
I just got my B36 RTR today, so can I use just the speaker on my quicrun 1060 that I'll install in ?
Quicrun 1060 has speaker?
If u mean installing speaker on quicrun 1060. Nooo. Speaker doesn't work that way
@@EdwardChew i mean install speaker on my fly sky receiver, that is installed on quicrun 1060. Thank you for the reply
@@ecrcmodels doesn't work that way
Where to put esc?
it has built in ESC
Hello. Is it possible to disable auto brake? I find it really annoying and it's made me look for different electronics.
I need the truck to roll when I release the accelerator not to brake automatically and constantly need power even on downhills..
Auto Brake/Drag Brake exist on the Low Speed Gear mode only.
On High Speed Gear there's no Auto brake/Drag brake.
Also check to make sure your drivetrain is smooth
Well for most we want the car to stay still even on downhill.
How to connect Rx_v1.8 ?
I need RES where is get it
www.wpl-rc.com/collections/radio-receiver
Read description
What if the steering servo doesn't turn on
email us the issue in detail sales@wpl-rc.com
Can I use d99s battery (7.4v) to wpl v3
i believe so
Hi edward.... I have problem.. Why my board v3 became hot and led fast blinking and i bind at transmitter be same problem
This will work on the D12?
Yeah if u want
can i use this on WPL D12 and 3S Lipo? Thx
Yeap
th-cam.com/video/6yOjuOFNyas/w-d-xo.html
But risk burning the motor though as it's already the high speed one
how to make this crazy van like a real car moving
Can you make vidio for install wpl v2
Here bro
th-cam.com/video/LJz3Dl2knac/w-d-xo.html
I already install but sometime the throttle jerking and sometime not function 😭
need to see video
@@EdwardChew already pm u at fb sir
@@syahmihobby8963 oh is you. cool! solved!
@@EdwardChew thanks man!!
hello.. i want to ask. i have problem with this v3 remote.. i using gearbox single motor 260.. when i play. the throttle will cut of after couple second.. i don't use esc right now.. maybe someone will help me.. tq
Voltage cut. Please use lipo. Make sure voltage is above 6.1V under load
ok sir tq
one more thing i want to ask.. about power source.. with this board and motor.. it is ok if i buy 7,4v and above.. 11.1v can support??