Nissan Altima 2013-2018 CVT Fluid & Filter Replacement

Tools I Used:
Denzel Trolley Jack, 5-1/2-Inch - 13-1/4-Inch, 2Ton
amzn.eu/d/4i5uceJ
Vtools 3 Ton Adjustable Car Jack Stands,2 Piece Set
amzn.eu/d/ixip2GS
11 Pieces 3/8 Drive Ratchet and Socket Set
vtoolsme.com/hand-tools/socke...
ARCAN PROFESSIONAL TOOLS 1/2 Inch Drive Deep Impact Socket Set
amzn.eu/d/8sNiQIV
RYOBI - ONE+ HP 18V Brushless Cordless 4-Mode ½ in. Impact Wrench (Tool Only) - P262
a.co/d/hmrgRcf
Tekton 1/2 Inch Drive Click Torque Wrench (10-150 Ft.-Lb.) | 24335
amzn.eu/d/iyqmIy4
Veepeak OBDCheck BLE+ Bluetooth 4.0 OBD2 Scanner for iOS & Android, Car Diagnostic Code Reader Scan Tool
amzn.eu/d/7E6q1C5
CTA Tools 7428 ATF Filler Adapter - Compatible with Nissan 12 x 1.25
amzn.eu/d/dEQN9jW
GASTROPLAST 1000 ml. Squeeze Bottle Dispenser (Clear) for oil
amzn.eu/d/eYt6kfS
Slippery Pete Fluid Pump for Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid
amzn.eu/d/h2nFyrp
EPAuto 1/4-Inch Drive Click Torque Wrench (20-200 in.-lb. / 2.26~22.6 Nm), Black
a.co/d/dUtm476
Grease & Anti-Seize :
Liqui Moly Brake and Parts Cleaner Spray 500 ml
amzn.eu/d/aEI7Pjl
OEM Parts :
NISSAN CVT GEAR OIL NS-3 4L
amzn.eu/d/dqrwVcI
Nissan Transmission Pan Strainer Filter
Part No: 31728-1XFO3
Nissan Cartridge Filter
Part No: 31726-28X0A
Trans Pan Drain Plug Washer
Part No: 11026 01M02
Cartridges' Filter O-ring Seal
Part No: 31526-3VXOA
Transmission Pan Gasket
Part No: 31397-1XFOD
Supplier : PREMIER AUTO PARTS LLC RSD
Location : maps.app.goo.gl/3W8hdU4cvLV2e...
Contact : Mr. Manoj [phone]
Nissan Altima Factory Service Manual.
www.nicoclub.com/nissan-servi...
#ahadlivingspot #AhadLivingSpot #nissan #CVT #Nissan Altima CVT #altima 5th gen. #Altima 5th Generation CVT Replacement #altima #nissan #cvt #gear

[@MyAltima2013]

amazing 👍👍

[@md-Tuhin-mia]

Good job

[@ahadlivingspot]

Thank you

[@khaledanter6450]

good job 👍👍👍

[@ahadlivingspot]

Thank you! Cheers!

[@sidhiquekm7066]

Good 👍

[@ahadlivingspot]

Thank you! Cheers!

[@Azzan_Tech]

great job, where is your location on UAE

[@ahadlivingspot]

Thank you . Dubai

[@prasad9732]

Hello, good job. Is it necessary to use new gasket for pan? I am not getting new gasket here in india, my car is nissan sunny cvt. Ran 1,08000km. Never opened pan. Service centre people said, its life time fluid , no need to change. They are not willing to change it. One of he experienced mechanic out side nisaan Service is ready to do, but i cant get pan gasket. It is ok to reuse old gasket

[@deviance3235]

No you need a new one, I wouldn’t risk it reusing the old one. Might come off.

[@ahadlivingspot]

Sorry for the late reply. It is clearly mentioned in the Nissan service workshop manual that the gasket should never be reused. The video I have provided here is related to Nissan Altima 2013 cvt transmission. The CVT transmission is a very sensitive transmission and therefore can break down very quickly if not properly maintained. As far as I understand it is advisable to change the trans pan filter as well as the gasket in your Sunny around 1 lakh kms. If you re-use the gasket with silicone or any other component then it is more likely to leak.

[@prasad9732]

@@ahadlivingspotThank you. Ihave checked under the car, no gasket there. Its sealed transmission with bolts. And I am not getting filter. So I am planning to change 4L through drain plug. Amsoil cvt fluid I am going to use. How is your post experience with amsoil? What is the interval for amsoil cvt fluid?

[@hochi2884]

Provide me any garages in uae thats properly done.Cvt oil change

[@ahadlivingspot]

I have yet to come across a garage that does a correct CVT Fluid replacement as per NISSAN CSM, I think only dealerships do that or there are some Premium Service Garage especially in Al Quoz area ..

[@ibrahimahmed1798]

Can u give me location of your garage and contact details in UAE. I was actually looking for a genuine service centre to replace cvt fluid on my altima

[@ahadlivingspot]

Bro I don't have a garage I do all this in my room's parking lot and I'm not a professional mechanic. I'm just a student in this matter and just car mechanical enthusiast. but I can 100% help you with what you asked .. following my email just send hi, i will reply you along with my contact details . [e-mail]

[@ibrahimahmed1798]

@@ahadlivingspot thanks. Email sent

[@omegaman7241]

was the car level?

[@ahadlivingspot]

Sorry I don't understand what you mean

[@mohitprasher5093]

He means was the car completely flat when you measured the fluid? If you jacked it up from the front, it would not be level since the front is up higher than the rear, making the fluid come out less from the overflow bolt

[@SuperGhost453]

He copied off another video that goes into more detail. Not saying he did a bad job, but there are extra steps to take before starting this whole process.