I love the STI. But i hate crunching and scraping my front end in daily driving through the months. I barely drive it anymore. and i am still on stock suspension. chargespeed bodykit.
@SubiSpeed how would you recommend to line up the subaru lettering on the left side if it is currently removed off my car? how many inches up from the trunk and off the side to keep it in line with the wrx on the right side. thanks
Probably never. I have checked their site since 2015 and not one set has showed up. Its apparently rocket science to create them because I haven't seen any on other websites either. Everyone just wants to sell shitty overlays.
I wish I could of seen the removal of the rear Subaru emblem because I am trying to remove mine on my 2012 Impreza , it is in a recessed area and hard to get anything behind it.
Cool and all but my fender emblem and rear WRX, Subaru and AWD emblems I already plasti dipped black. And I just use the overlays you guys sell. Looks good though. I like the black on blue.
Why don't you guys offer this in Carbon Fiber, every other emblem you seem to offer is in Carbon Fiber, but this Subaru / Symmetrical AWD Gloss Black Trunk Emblem - 2015+ WRX / 2015+ STI..
Good Gone is GREAT STUFF!! The only thing I would do that he doesn't do is to use a 3M adhesive promoter!! Just like on the side badges. Also, if you don't have a heat gun, you can probably get away with a hair dryer!!
Hey, I got the front and back emblems, and I've been trying to take the stock off. I can't find a plastic pry tool like the one in the video. All the ones online seem to be for either phones or paint or upholstery. What pry tool should I use?
did you line up the foam piece on the car and tape that off? Or did you tape off the letters on the car and try to align the letters in the foam piece with the car?
Justin, did you reach out to our support staff? Please do so and we can see if this was a defect and take care of you on it. www.subispeed.com/contacts/
Same here. I have a 2017 STi and the front emblem didn't fit my car. I'm not sure if the adhesive was old stock or too thin that it won't reach the bumper for it to stick. I'm also very very disappointed.
+Ditta & Dumont Should have checked the site first, here it is for anyone still looking. Hoping these will be released soon. Absolutely have to place an order on these tail lights! www.subispeed.com/2015-subaru-sti/lighting/subispeed-tr-tail-lights-2015-wrx-2015-sti#.Vor0ZfF4iQk
+ SubiSpeed Any tips on removing the rear subaru emblem? There aren't any gaps between the emblem and car to get fishing line/floss into or any tools for that matter. I'm trying to replace the chrome frames with these: www.subispeed.com/2015-subaru-wrx/vinyl/front-and-rear-emblem-frames-matte-black-2015-wrx-2015-sti#.VoBnGPkrKM8 Any help is appreciated.
+SUBIE_CUHH That's exactly what I was thinking as soon as he replaced the front emblem... Some of the overlays even look better, they have a little bit of shine to them.
+subie_cuhh you def can. however.. look closely at the overlays. its just star stickers sitting on a black background. i could literally walk up to the car and peel the stars off with my thumb nail. you get what you pay for cuhh.
***** time for you to go back to your bullshit video games little buddy. or making more wack ass videos that have 0 likes. lmao at your whole shit channel. what a scrub.
sublyme29 ive emailed them about it and from what i know its something to do with their distributors not having good batches when they make them.. idk though id really like to have these badges over the stupid carbon fiber ones...
+motomuscl3 The rear was actually a lot easier than the front since it is smaller. If you search "plastic pry tool" in Google, that'll give you exactly what you need.
+SubiSpeed shoooot! I ended up going to the store and getting a putty knife and using floss to give me a grip to pry it off. I put the front on before I installed yalls JDM grill on the 16 wrx! . either way a learning experience ha
Had someone buy me these emblems from you guys and the rear one doesn't have nearly enough tape. You guys should do a better job selling products that aren't half *****.
These emblems suck, they look super cheap up close. Its literally a plastic mold with a sticker on top. I wish a company made oem style emblems that had different colors.
I don't recommend anybody buy this product. They are super cheap and flimsy in comparison to OEM and they don't even use the right tape. Mine were heated and the area was cleaned but they did not stick. I had to remove and add my own tape.
I love how videos like this always skip right over the actual difficult parts 🤥
What the difficult part of this??? About as easy as car mods get
@@jimsmith8797 🤥🤥🤥
This is probably the easiest car mod other than putting a sticker on your car 😂
Please, if you can't do something THIS SIMPLE, you obviously don't even change your own oil and filter!!🤣
I can see this looking good on my Lightning Red. Will order soon!
That's really cool looking, but are you kidding me with those prices?
Get a job
You spent over 30k on a car. U don’t have 100 or so bucks for emblems???
I got defeated ones for 10$ 😅
Thanks for yet another nice product! Do you guys think you could produce a black chrome emblems?
Nice video and very helpful. Taillights...
What's with the new tail lights haha!
Where can I get those tail lights? They're awesome!
Where are those tail lights from? They're sick af
I love the STI. But i hate crunching and scraping my front end in daily driving through the months. I barely drive it anymore. and i am still on stock suspension. chargespeed bodykit.
where did you get that exact pry tool
i know u commented this 5 years ago but you can get some pry tools like this with different sizes and thicknesses at Harbor Freight Tools for liek $5
What are those lights on the back of that white subaru @ 5:01? :D
Anyone know where i can find the blank base that the badge attaches to? it's the piece on the grill at 1:32
@SubiSpeed how would you recommend to line up the subaru lettering on the left side if it is currently removed off my car? how many inches up from the trunk and off the side to keep it in line with the wrx on the right side. thanks
what temperature would you recommend for the heat gun?
Do you guys have the matte black STI fender emblems with white inlays?
do these come with blue stars???????
I really hope the Levrog comes the the US.
Can you guys PLEASE DO A REVIEW ON THE TAKEDA INTAKE, sound etc, it looks promising
+Oscar Dao As soon as they become available we will. They have yet to even ship from AFE. :(
+SubiSpeed omg dude so keen! Please include as much detail as possible :D
Will 2015+ emblems fit a 2014 wrx?
When are you going to get more black and red front and rear emblems?
Probably never. I have checked their site since 2015 and not one set has showed up. Its apparently rocket science to create them because I haven't seen any on other websites either. Everyone just wants to sell shitty overlays.
I wish I could of seen the removal of the rear Subaru emblem because I am trying to remove mine on my 2012 Impreza , it is in a recessed area and hard to get anything behind it.
dude, I'm in the same boat! We need answers!
I wish you had a black with black carbon fiber. I like black/red but black/black would be awesome.
Subispeed lol i have to ask again when will the aftermarket tail lights on that 2015 sti be out ?
+cristian marchante NEEVVVAAAAARRR - just kidding. Looking at early 2016 sometime.
Cool and all but my fender emblem and rear WRX, Subaru and AWD emblems I already plasti dipped black. And I just use the overlays you guys sell.
Looks good though. I like the black on blue.
You guys are in Minnesota?! I didn't even know that.. Which means I won't have to ship parts?
There should of been a black and blue side emblems that would looks amazing. Will those tail lights be for the WRX as well? lol sorry
@subispeed the pry tool looks like a spreader you would use to spread bondo, would one of those work for this?
Yeppers
+SubiSpeed will the trunk letters ever be released in red?
Why don't you guys offer this in Carbon Fiber, every other emblem you
seem to offer is in Carbon Fiber, but this Subaru / Symmetrical AWD
Gloss Black Trunk Emblem - 2015+ WRX / 2015+ STI..
Which emblems are these on your site I order the gloss ones by accident..
Good Gone is GREAT STUFF!! The only thing I would do that he doesn't do is to use a 3M adhesive promoter!! Just like on the side badges. Also, if you don't have a heat gun, you can probably get away with a hair dryer!!
Hey, I got the front and back emblems, and I've been trying to take the stock off. I can't find a plastic pry tool like the one in the video. All the ones online seem to be for either phones or paint or upholstery. What pry tool should I use?
This "lil Chizler" is exactly what we use.
www.amazon.com/Lil-Chizler-Vinyl-Wraps-Decals/dp/B0065LTR98
Do you guys offer the fender wrx emblems in carbon fiber with black text ?
Do these badges come with a stencil now?
what else can we use in place in a heat gun if we don't have one?
How did you guys line up the SUBARU AWD letters. just looking for a good method.
+karn1voree Painters tape around the edges.
+SubiSpeed but what about the space in between the letters of subaru? Just fill gaps with tape?
thedurpdurp60 The emblems come in a prealigned piece of foam so you don't have to worry about spacing.
did you line up the foam piece on the car and tape that off? Or did you tape off the letters on the car and try to align the letters in the foam piece with the car?
I bought some off the website and the front emblem didn't fit for my 2017 WRX was very disappointed.
Justin, did you reach out to our support staff? Please do so and we can see if this was a defect and take care of you on it.
www.subispeed.com/contacts/
Same here. I have a 2017 STi and the front emblem didn't fit my car. I'm not sure if the adhesive was old stock or too thin that it won't reach the bumper for it to stick. I'm also very very disappointed.
Same here. Adhesive seems too thin.
I cant understand how this is $100 for one little plastic WRX emblem
+Absolute Value Unfortunately molds aren't cheap :(
Got some on ebay for like $18 they look the same lol
Does it come in high gloss Cf instead of flat?
What kind is that front lip kit?
TIA
so where did ya get them tail lights
Any update on those tail lights on the white sti?
+Ditta & Dumont Should have checked the site first, here it is for anyone still looking. Hoping these will be released soon. Absolutely have to place an order on these tail lights!
www.subispeed.com/2015-subaru-sti/lighting/subispeed-tr-tail-lights-2015-wrx-2015-sti#.Vor0ZfF4iQk
what did you guys use to cover up those holes on the front bumper?
+clyde coloma www.subispeed.com/hcd-paint-matched-bumper-plugs-2015-wrx-2015-sti#.ViMbX0JeDlI
Will these fit on my 2018
Will these fit a 14 Sti
where can i get a pry tool like that?
Are "Pink"/Cherry Blossom Red JDM emblems available for the VA WRX/STI?
+Benito Samia (Bb) Yes, but they are very expensive and more than most people are willing to spend on a set of emblems.
so what tail lights are they talking about? looks the same to me..
Where can I get the front emblem?
why wont the front/rear emblems work on another model year? are they really that different?
+ahhdem Different sizes
Does anyone know what tail lights are on the white STI?
Whats the song when the white sti comes out?
+Walter Elkin Waiting for Love - Avicii
Thank you. :)
That hueburger motors is where I bought my car lol
need those tail lights wtf how do I get them
But does it fit for a 2012 erx..surely but i wanna be sure
Whiplash's Junkyard did you find out if it fits?
I've been looking everywhere for some kanji emblems. I think they'd look sick. Someone send me a link lol
+ SubiSpeed Any tips on removing the rear subaru emblem? There aren't any gaps between the emblem and car to get fishing line/floss into or any tools for that matter. I'm trying to replace the chrome frames with these: www.subispeed.com/2015-subaru-wrx/vinyl/front-and-rear-emblem-frames-matte-black-2015-wrx-2015-sti#.VoBnGPkrKM8
Any help is appreciated.
+Jonathan Price We applied heat and were able to wedge our pry tool and begin separating the emblem from the trunk.
Where can I get those tail lights on that STI?
+julio Palacios Our website in 2016. Still in prototype stage.
+SubiSpeed are yall looking at any prototype headlights soon too? i dont feel safe baking my headlights to paint them. thanks hopefully i get a reply.
+guybob123 yea same here.
would it fit the 2011-2014 wrx?
Barry Cabrera hey, did you ever find out if they fit
can't you just use overlays and plastic dip for the emblems lol
+SUBIE_CUHH
That's exactly what I was thinking as soon as he replaced the front emblem...
Some of the overlays even look better, they have a little bit of shine to them.
+subie_cuhh you def can. however.. look closely at the overlays. its just star stickers sitting on a black background. i could literally walk up to the car and peel the stars off with my thumb nail. you get what you pay for cuhh.
sublyme29 true but i can assure you that you wouldnt get near my car,, lets just leave it at that
sublyme29 rough day kid? its ok, people have fucked up lives like you.
***** time for you to go back to your bullshit video games little buddy. or making more wack ass videos that have 0 likes. lmao at your whole shit channel. what a scrub.
I'm a fan of chrome as long as it's done in moderation
not really feelin the different badge emblem or the blacked out wording. only like the side panel black trim emblem
I like them, just not $60 like them.
Great video , what's the song name ?
putting these in my 16 rex today..wish me luck, lol
Defenderofthe2nd1979 hey man. Saw you did this a year ago, how were the results?
im not going to lie i own a 2010 wrx and i watch these videos and feel super sad its only 2015 up mods
+Yb ok Well when you upgrade we got you covered. ;)
yeah yeah haha
never in stock
ive been checking their website since May and they have not been in stock once. not sure why they even have them for sale..
sublyme29 ive emailed them about it and from what i know its something to do with their distributors not having good batches when they make them.. idk though id really like to have these badges over the stupid carbon fiber ones...
lmao they didnt do the rear cause its a pain in the ass. been searching or a "plastic pry tool"...whatever thaat means
+motomuscl3 The rear was actually a lot easier than the front since it is smaller. If you search "plastic pry tool" in Google, that'll give you exactly what you need.
+SubiSpeed shoooot! I ended up going to the store and getting a putty knife and using floss to give me a grip to pry it off. I put the front on before I installed yalls JDM grill on the 16 wrx! . either way a learning experience ha
I'm so scared to damage paint I'll just dip them.
🔝
De-badge it, dammit!
Had someone buy me these emblems from you guys and the rear one doesn't have nearly enough tape. You guys should do a better job selling products that aren't half *****.
skipped the back emblem removal lol
Exact same process …..
absolutely no way... mine were a complete bitch to come off
Waste of $
+Richard Burns So true. For the side badges and rear lettering I just used plastidip. $7 can and $3 roll of tape. $10 compared to $140 +
You can find them on eBay for so much cheaper
Looks just like plastic dip
Worst quality it wont stick
Most of that is pointless. a little touch of paint and those emblems will be black
No
These emblems suck, they look super cheap up close. Its literally a plastic mold with a sticker on top. I wish a company made oem style emblems that had different colors.
taillights
Yup, a total waste of money.
way over priced,
I don't recommend anybody buy this product. They are super cheap and flimsy in comparison to OEM and they don't even use the right tape. Mine were heated and the area was cleaned but they did not stick. I had to remove and add my own tape.
Where did you get the front lip?
Will 2015 emblems fit on a 2013 ?
where can i get that plastic pry tool from
Does the rear fit a 14 hatch?