Awesome video as always. I keep seeing these so I think I'm going to break down and get one. I ordered a 64 impala and actual got one so I might have to wait a little while to get a 6x6 lol. Have a wonderful day!!
I've a TRX-4 Bronco just now with 4s on a Hobbywing 880 ESC, a Surpass Hobby 12 turn 550, 5 slot motor, 9 tooth pinion gear and under drive in both axles. It does alright but ideally i'd like an Axe in there. I think with the more limited gearing on the 550 motors, i reckon i might go for the new 540L sized 2800KV version. Means i can still keep my ultra low gearing but still have a bit of wheel speed and hopefully it has a bit more torque than the older, shorter 2300kv version.
Nice video and test, this motor/esc combo its very tempting, im getting and Axial 6x6 today i might have to look into one of this, i already have fusion, mamba x with HH3500kv and a brushed set up in my other trucks.
Well Joe I got my card stuff worked out and I scooped this the TRX6 up along with the Yeah Racing aluminum axle housings. Bro I checked that description and used the link below. I think there’s only 2 more crawlers I need and my collection is complete
I've seen pinions that go down to 8t with a 5mm bore but they are log pinions and to get the small diameter the teeth are off the end of the motor shaft. There isn't room enough to space the motor back to make this work.
What a badass, that thing was so quick in the bash test. Blew my mind how well it handled as well. Once I get my bank card crap worked out I’m getting a TRX6 for sure, it’s in my cart at Amain just have to start new account thanks to low life’s. Does the rear drive shaft fall out between the bridge axle and rear?
I have never had an issue with it. be warned the stock traxxas electronics are pure garbage for the price but after you change that stuff its the ultimate truck
Joe, have you tried a Magnum in your Creep 6? Seems like it would be perfect with the Capra skid only taking 540 sized motors and the torque and smoothness
What 5mm pinion gear did you use, I don’t seem to be able to find one that fits a 5mm shaft and works with the spur gear. Traxxas said they don’t make one.
chris people never think of that, I sit here watching reviews and comes to the modulation they never dial that baby back to get the ultimate slow control in its full potential. I’m glad you said something. It’s finally out there.👍👍
100%. When i'm doing super slow crawling in close up videos or technical sections on rocks, i use the throttle trim instead with FOC for the ultimate in slowness and control.
Would you recommend it for the yeti 1/10? I like the best of both it offers but im not sure if it will be a bit short on speed. Possibly you could try it in a video that would be awesome. I currently have the hobbywing ezrun 3200kv but fancied something sensored hobbywing for trailing.
Do you think the 540L 2800kv would work on the 6x6? With a lower minimum RPM? I like the 3300kv speed to bash around but i like my low low speed more. Im looking for a motor esc combo for mine burshless, i was thinking on a Holmes puller pro v2 but i already have one on my TRX4 and i want to try something different
Guys I installed l the axe 550 R2 I paired my control and everything works but I noticed is 2 times faster in reverse also not to mention that my throttle in the control is switched you pull the trigger it goes back you push the trigger it goes forward using the axe 550 with the original traxxas control and receiver.. anyone any ideas ? I’m new to the hobby don’t know that much lol
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
The surpass hobby 3000kv brushless motor was a total WIN WIN. Thanks for the advice I did the install and it is kick butttttt awesome to no end. ❤️👊😀
Update for the Hobbywing Axe Foc R2 ist there. Now ITS really quiet. You predicted it correct.
Just ran my trx6 with that setup n I truly love it best money I spent on it
Awesome video as always. I keep seeing these so I think I'm going to break down and get one. I ordered a 64 impala and actual got one so I might have to wait a little while to get a 6x6 lol. Have a wonderful day!!
Patiently waiting for mine!
Man I wish that R2 esc would run the V1 motors. Great video as always man!
@ExocagedRC check this low CG chassis out for the 6x6
I've a TRX-4 Bronco just now with 4s on a Hobbywing 880 ESC, a Surpass Hobby 12 turn 550, 5 slot motor, 9 tooth pinion gear and under drive in both axles.
It does alright but ideally i'd like an Axe in there. I think with the more limited gearing on the 550 motors, i reckon i might go for the new 540L sized 2800KV version.
Means i can still keep my ultra low gearing but still have a bit of wheel speed and hopefully it has a bit more torque than the older, shorter 2300kv version.
yep
Nice video and test, this motor/esc combo its very tempting, im getting and Axial 6x6 today i might have to look into one of this, i already have fusion, mamba x with HH3500kv and a brushed set up in my other trucks.
Well Joe I got my card stuff worked out and I scooped this the TRX6 up along with the Yeah Racing aluminum axle housings. Bro I checked that description and used the link below. I think there’s only 2 more crawlers I need and my collection is complete
awesome man, thank you, the trx6 is amazing and super easy to make it super capable just like the Creep6
The stock esc with extra jst plug which connects to the power supply is now gone. Where can we now connect the lights?
Solder a JST on the battery plug off the esc.
Joe:
Redcat has a 9 tooth, 32 pitch, 5mm pinion gear. Like $6
Do you have a link? I've never seen a 9t, 32p pinion with a 5mm bore but i've been looking for one for ages.
@@scottishrc7857 same here!!!
www.rcplanet.com/rc-parts/r-c-car-truck-parts/redcat-racing-m1-0-9t-pinion-gear-5mm-shaft-tr-mt10e-redk6602-9/?gclid=CjwKCAiAlNf-BRB_EiwA2osbxU9tikGjTIMvOtJGLXsZkrK3wWIze0LL6n13m6pY-zKdKjCgLfLhfRoCD84QAvD_BwE
I've seen pinions that go down to 8t with a 5mm bore but they are log pinions and to get the small diameter the teeth are off the end of the motor shaft. There isn't room enough to space the motor back to make this work.
What a badass, that thing was so quick in the bash test. Blew my mind how well it handled as well. Once I get my bank card crap worked out I’m getting a TRX6 for sure, it’s in my cart at Amain just have to start new account thanks to low life’s. Does the rear drive shaft fall out between the bridge axle and rear?
I have never had an issue with it. be warned the stock traxxas electronics are pure garbage for the price but after you change that stuff its the ultimate truck
Like Chris said, that little shaft seems to stay in well.
We all know how axials 6x6 does so it had me wondering. Thanks guys
great video as always but which pinion do you use with this engine?
12t
This is exactly why I cut off the bumpers on my trx6.. they hang on everything !!
Joe, have you tried a Magnum in your Creep 6? Seems like it would be perfect with the Capra skid only taking 540 sized motors and the torque and smoothness
I have not, although it has the power, I think I'll have to keep the magnums in their current positions
Do u know why the r2 is noisy ?? Should we change the setting in its app?
I don't see any settings that would reduce that in the app.
@@ExocagedRC its so strange... hobbywing claim that r2 is super silent... but...
What 5mm pinion gear did you use, I don’t seem to be able to find one that fits a 5mm shaft and works with the spur gear. Traxxas said they don’t make one.
Does Hobbywing come with a Update there can reduce the noise maby?
Don't know but hopefully they see this and put one out.
you gotta use the throttle trim in combination with the foc you can crawl super slo
chris people never think of that, I sit here watching reviews and comes to the modulation they never dial that baby back to get the ultimate slow control in its full potential. I’m glad you said something. It’s finally out there.👍👍
100%. When i'm doing super slow crawling in close up videos or technical sections on rocks, i use the throttle trim instead with FOC for the ultimate in slowness and control.
I had the throttle bandwidth set to 6% and Expo at the radio, I was barely pulling the trigger and then the motor comes on as slow as it can be.
Exocaged RC after that it’s gearing plus pinion equals WOW!
@@ExocagedRC if your using the gt5 you have a throttle trim on the remote set that to about 29-30 and it will crawl super slow
Would you recommend it for the yeti 1/10? I like the best of both it offers but im not sure if it will be a bit short on speed. Possibly you could try it in a video that would be awesome. I currently have the hobbywing ezrun 3200kv but fancied something sensored hobbywing for trailing.
How’d you get that little hot wheels to stick?
E6000 glue
@@ExocagedRC thanks
Do you think the 540L 2800kv would work on the 6x6? With a lower minimum RPM? I like the 3300kv speed to bash around but i like my low low speed more. Im looking for a motor esc combo for mine burshless, i was thinking on a Holmes puller pro v2 but i already have one on my TRX4 and i want to try something different
yeah should run well in there
Are 3300kv also good for trx4sport?
Dont need the fan, you can put it off.
Guys I installed l the axe 550 R2 I paired my control and everything works but I noticed is 2 times faster in reverse also not to mention that my throttle in the control is switched you pull the trigger it goes back you push the trigger it goes forward using the axe 550 with the original traxxas control and receiver.. anyone any ideas ? I’m new to the hobby don’t know that much lol
Sam seems jealous you play with them trucks and not him. Hah.
Oh he gets attention too, well I should say he demands attention
@@ExocagedRC they all do bye
I just built a trx 6 from scratch...its boring...goes everywere effortlessly, goin back to my trx4 for the challenge.
First 😁👍 if your not first your last Ricky Bobby
J Hawk shake&bake
Sam seems accustomed to R/C.
He should be LOL his whole life has had them in there
Keeps the weight down low
Ooow it’s nosiey the new R2 🤔😔
Updated firmware for the Hobbywing Axe Foc R2 ist there. Now ITS really quiet. Perfect
@@runnerbaba sounds perfekt!! Thanks for the reply!!
Finde den 6x6 richtig schlecht da ist der Defender 5 mal besser im Gelände. Bin alle davon schon gefahren. Der ist mehr was für den Wald.