How to Replace Crankshaft Position Sensor 2009-2019 Ford Flex

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น •

  • @TRQ
    @TRQ  ปีที่แล้ว +3

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @GreatLakesAudits
    @GreatLakesAudits 9 หลายเดือนก่อน +3

    How the hell is he able to get both hands in there?
    How the hell is he able to get that right hand in there from behind?

  • @tinsleydrone6296
    @tinsleydrone6296 ปีที่แล้ว +15

    It is not easy to reinstall the sensor at all. You can not see where it goes and must do it blind! Good luck!!

  • @stevebarnhouse6794
    @stevebarnhouse6794 ปีที่แล้ว +7

    I’ve been trying to get it back in position for three days now…

  • @reyesreef3714
    @reyesreef3714 8 หลายเดือนก่อน +6

    If this problem is affecting your Ford. Just trade it in. Done with the brand for life. This car has been a nightmare

  • @donnyhacken1747
    @donnyhacken1747 17 วันที่ผ่านมา

    Did you have to remove anything to get to that sheild

  • @matthewmiller8049
    @matthewmiller8049 6 หลายเดือนก่อน +1

    Any tips on removing lost 7mm socket that fell in there?

  • @HenryCussimanio
    @HenryCussimanio 9 หลายเดือนก่อน +2

    What if I changed it (one of the hardest jobs I've done), and the car stalls out still? Does the sensor need to be "relaearned"? Could the sensor be faulty?
    I hate Ford! Never will I buy another Ford. Lemon since the 1st day.

  • @everybodyloveschris95
    @everybodyloveschris95 11 หลายเดือนก่อน +2

    Make sure you have a bore scope for this one. I've been on this for a few hours now and just said f-it and bought a cheap Amazon one. Like 30 bucks and I was finally able to see it wtf I was doing.

  • @phanhmeo1772
    @phanhmeo1772 หลายเดือนก่อน

    Is that drivers side or passenger side

  • @valentinofaraone3319
    @valentinofaraone3319 5 หลายเดือนก่อน

    How would you be able to remove mine fell in that hole trying to install it I don't know what to do now

  • @worldsworstyakanglerwa6286
    @worldsworstyakanglerwa6286 5 หลายเดือนก่อน

    Found the trick to reinstall, make sure the bolt has a "tapered" end "after markets bolts" do not. 2ND use a 2-3 in 1/4 in screwdriver bit with 7mm socket, next use 1/2 heat shrinking tube to hold the sensor bolt and socket together about 7/8 in long, just enough to cover the bolt and socket. This will give you the leverage you need to find and drive the tapered bolt into position. When done simply twist and pull the screwdriver bit out...whala!!! All done.

  • @jlthewiseman2560
    @jlthewiseman2560 4 หลายเดือนก่อน

    How much should a shop charge for this service if I take it to a mechanic?

  • @jamesjohnson6644
    @jamesjohnson6644 ปีที่แล้ว +2

    Dude, what kind of engine ?

  • @Stoopedfays
    @Stoopedfays 8 หลายเดือนก่อน

    After a few days of trying and rewatching this video multiple times, I've come to the conclusion there see step left out. There isn't enough room for me to get a 3 inch extension with a ratchet much less both hands. The cat heat shield is in the way of everything

  • @brancwp
    @brancwp ปีที่แล้ว +1

    This is the same location for the 2012 Ford Taurus 3.5.

  • @FernandoHernandez-y2d
    @FernandoHernandez-y2d ปีที่แล้ว +1

    Gracias excelente información

  • @J05hFontenot
    @J05hFontenot 9 หลายเดือนก่อน +1

    I don't want to criticize, but I just want to point out for those who aren't repair savvy: do NOT pull sensors off by the wire lol

    • @TRQ
      @TRQ  9 หลายเดือนก่อน

      +@J05hFontenot Thanks for the feedback! 1aau.to/m/Shop-TRQ

  • @aekorr
    @aekorr 9 หลายเดือนก่อน +1

    Prepare for finger cramps.

  • @enjoidvs05
    @enjoidvs05 4 หลายเดือนก่อน

    🚨WARNING🚨
    The comments are true!!! You cannot get the bolt back in place!!!
    Also, the bolt that came with my aftermarket part was slightly different and stripped the threads on the housing!!!
    Be aware/proceed with caution. I would highly recommend double checking everything else before this part and if you HAVE TO then get this done professionally.
    I love TRQ and 1A Auto, but this video is super misleading.

  • @wdomdorman
    @wdomdorman 7 หลายเดือนก่อน

    Installation is way harder than removing . There is no space for the fingers

  • @scruffstandlee1147
    @scruffstandlee1147 7 หลายเดือนก่อน

    takes longer than 6 1/2 mins for sure