ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
1975 Mercury 20hp Part 3 Water pump - Gearbox - Run
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2022
- In this video we get this old 20hp about ready for the open water.
Follow the links below for some of the items used in this video:
AMSOIL FULL SYNTHETIC Gear Oil 75W-90 1 Quart amzn.to/3xyjq3d
Heavy Duty Push Button Momentary Start Switch amzn.to/3cUjYso
Petrol Engine Cylinder Compression Tester Kit amzn.to/3iVme6C
marine grade wiring amzn.to/3qfOWAK
Super Clean 101723 1gal. Super Clean Degreaser amzn.to/3iSZp38
Electric starter
amzn.to/3qx0PlJ
CRANK N CHARGE Starter Solenoid Replacement For Johnson, OMC, Evinrude Outboard Motor
amzn.to/3dhgr7o
wiring connector kit: amzn.to/2Um5N91
Lucas Marine Grease amzn.to/3yiKncn
Carb kits:
amzn.to/3f06H33
Impeller:
amzn.to/2S2IXls
Johnson/Evinrude/OMC New OEM GASKET fuel pump
amzn.to/33PdzK0
Aluminum 3 Blade Propeller - RH, 10.5" Diameter x 11" Pitch x 14-Spline
amzn.to/3wjFkH3
Aluminum 3-Blade Propeller - RH, 10.1" Diameter x 13" Pitch x 14-Spline:
amzn.to/3x18avX
Aluminum 3-Blade Propeller - RH, 10" Diameter x 15" Pitch x 14-Spline:
amzn.to/3clMEtM
Video equipment used
Canon EOS M50 Mirrorless Vlogging Camera Kit with EF-M 15-45mm Lens, Black
amzn.to/3tcSCTE
Comica BoomX-D D2 2.4G Wireless Lavalier Microphone System Digital 1-Trigger-2 Wireless Microphone Transmitter & Receiver SLR Clip-on Micro phone,Lav Mic for Smartphone Camera Podcast Interview
amzn.to/3edmYB4
email me at
rm3dcreations@gmail.com
mail me at
RMD Creations
PO Box 387
Wellman, IA 52356
Thank you very much. Rebuilding a 1974 and this was very helpful.
I know it's been a year, but I just bought a 1975 Mercury 20 horse like you have there in this video. My question is: Do you remember where you got the impeller kit for that motor? I'm having a rough time finding parts.
Hi, e bay . I got from there to. I need help with oil change for this engine. Thanks for any answers.
Was telling someone yesterday how I would love your shop setup. Looks great
Wow, thanks, much appreciated. Thanks for watching.
Great videos. Thank you. I too must have missed the interior crack repair on the gear box. I have n '80 Merc 200 with the exact same crack.
Right on, thanks for watching
Good job
Hi , appreciate your explanation. Di you can explain how to change oil engine on same engine of this motor . I just got one , impeller issue but i want to change the vital engine oil. Thanks a lot.
👍👍 Enjoyed watching .Definitely curious about why no water out p hole. I think the skeg looks good . My Buddy and I just repaired his skeg about 4” piece and added a river running prop guard . 👍👍Drone 👍👍.As always Sir thanks for the ride along
We will find out about that for sure, thanks for watching
Buenas noches maestro éste motor en marcha La elice gira a La izquierda o alá derecha.mirando uno dé frente La elice ocea parado atrás dé La elice en marcha gira alá izquierda o derecha muchísimas gracias
If you come across another one that you decide to part out, I'd be a buyer for some parts!
ok, thanks for watching
I have this same motor. Where would you adjust the linkage to keep it from wanting to pop into forward gear? Thanks in advance.
I had a similar sound on an old mercury 35, turns out the spring near the top of the starter had broken and was allowing the starter teeth sprocket to make contact with the flywheel intermittently.
I will check that out, thanks for the tip, and thanks for watching
Friend, I bought a 1978 Mercury 200 20 hp long leg, I would like to know where the screws are to remove the leg or the system where the propeller is because I have to do some work on it, my gearbox is stuck, could you please help me?
If the pump hose has gotten stiff and all that has gone through it is Amsoil synthetic!?!?!? Hmmmm???? Wonder what it does to the seals in the gear case? Just wondering
Keep those videos rolling Michael. I really enjoy watching them and have learned so much. I watch a lot of different types of videos but gotta admit that your stuff is my favorite. What is the name of the body of water that you show boating on & in what state? Thanks so much & have a beautiful day!!! Illinois
Coralville Lake in Iowa, the river shots would be the Mississippi River when you see those.
I got a 20hp same motor i had a guy go trough it he got it going i brought it to the lake got it id forward and once boat started to plane out i got a bad vibration in lower unit almost like it kicked out of forward id have to almost come to a stop and go again and it would be ok intell little over half throttle any reason for that u could come up with or how to fix it ?
As Mr. Jackson would say "I'm going to buy me a Mercury & cruise it up & down the road"
Most folks won't know the K.C.Douglas version.
The Steve Miller band is the version that I am most familiar with. Guess I just dated myself.
I'm familiar with the song for sure, thanks for watching.
I had the pee hole plugged by a mud daubber wasp 2x over the last 2 seasons- poked with a wire while running and it pushed through!
dang daubber anyway. Thanks for watching
I have a 1970 20hp merc and it’s leaking between gear housing and drive shaft house spitting out oil any clue what it could be or how to fix it ?
It's your seals between the water pump and gear box.
Tengo ese mismo motor con una helic de dos palas , quiero poner una de tres palas cual tengo q poner? Gracias
hey michael... great site..i grew up with '54 and '56 7.5 and 15 horse evinrudes running on the wapsie up by Littleton. ( I'm from Waterloo ..I see you are from Wellman.. great to see another Iowan!) ..anyway was looking for something in the 20 horse range don't know if you sell 'em as well as work on them... I'm not afraid to work on anything..am in the the process of making one of one of your stands.. Anyway let me know if you could and keep up the good work!
Thanks.. Craig
I have the same engine with a
two-bladed propeller. I want to put one with three blades. Which do I have to put? Thanks!!
So I have a 20hp mercury 200 series electric and having trouble finding the year of it... has silver stripes with some red in it. Anybody know about what year it is?
Where's a good place to order parts for these order models
What water pump kit did you use in this video? I’ve got a Mercury 200 20hp late 70s model and since it hasn’t ran in years I’m planing on replacing the water pump on it. I wanted to get new gaskets, impeller, and housing to give it a complete refresh.
Check out oldmercs.com for you part fitment.
Hey does anyone know where the thermostat is located on these motors?
Somehow I missed the CRACK repair...assumed THAT would be part 2.....OH and they are two different drive shafts....one has a groove for a o-ring and one don't....not the same. Where does that fan fit on the outboard??
Fan? thanks for watching
Nice video Michael. Were you getting water when it was in gear. I found with my 4.5 hp Mercury when it was in neutral water flow was minimal to none. Possibly a Mercury quirk?
Cheers
no water in gear, it was puffing air but no water, betting it is thermostat blockage, thanks for watching.
I put grease on my impeller like that once and it would not pump water. I took it back apart cleaned it off and it pumped fine
Where is the best place to buy a tiller handle and controls for an older mercury like this one
eBay is probably the only place to fine stuff like that.
Nice work, I wonder if the thermostat housing is clogged? Is the shift cable have a bend in it to keeping going into resverse correctly?
Thanks
Tim
That's what I'm thinking. I'll be checking it out next. Thanks for watching
Michael, It's not unusual that the clutch dog needs some coaxing to engage in reverse. Usually, the engine's vibration is enough to shake it a bit and allow proper alignment and engagement. If I remember correctly, those motors have a locking mecanism that won't allow the motor to lift up in reverse. You might want to have a look at that as it a worthy safety feature. Stay safe and be merry !
Hi,great videos on the 20hp/i am presently rebuilding the same motor but its missing the prop and i cant seem to find the specs on it or where to find one...any info would be appreciated.8 spline,3inch gearbox and i believe 11inch pitch,you have one?
What is your spline count and outside diameter of the spline shaft. I may have a prop.
@@Michaelsbackyardmarina the spline has 8tooth,and the outside diameter of the gearhousing case seems to be three inch(hard to measure precisely because splineshaft runs through the middle),i believe it should bethe same as the one in your video.
@@Michaelsbackyardmarina 8splines,diameter of gearcase is 3inches(hard to measure because propshaft in the center),and i think from research the pitch is 11inches.
@@Michaelsbackyardmarina upon further inspection,the gearcase is 2.75inch,.
Tengo ese mismo motor es una pena q no sean por lo menos subtitulados sus videos
thanks for watching
Put a speed controller on it.
will a speed controller work on a none brushed motor?
You cud put a speed controller on the fan so you can August the speed of the fan to what you need. I had that happened to me I put a new water pump I go to start it an it did not pee so I pulled it back a part that little wedge I put the old one in an it worked fine one other time I pulled it back a part I did not see nothing rough so I put it all back to tether an it worked that was strange. Yours might be the thermostat I'm thinking is bad or its plugged up so the water not flowing
Thanks for the tip and your experience with your water pump, Thanks for watching