Whipple Supercharger + LS Swap C10 - 1962 Bagged LS3 Chevy Stepside
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Check out our website and pick up some merch to help support the content we bring to you every week!
www.salvagetosavage.com
-----------------------------------------------------------------------------------------------------------
The LS swapped C10 stepside isn't just bagged and slammed anymore. It's now supercharged too! We're starting off by throwing on the billet Wegner drive kit before bolting on the paint matched 3L Whipple Supercharger onto the orange LS3 motor. We're also doing a bit of fabrication work this episode as well. Even though the engine bay looks amazing, we're still going to fit up our hood. We're also routing all of the hardlines for our Airlift management system. Once we can air up the stepside, we're able to roll it out to the lift to swap out our transmission pan for a low profile pan and pin our crank so we can turn the motor over for the first time!
-------------------------------------------------------------------------------------------------
Want to See More S2S Madness???
Stepside C10 Interiror
• 1962 C10 Stepside Full...
LS Swapped 350z First Shakedown
• LS Swapped 350z Shaked...
Breaking the Tesla Swapped C10
• We Broke the Tesla Swa...
Turbo Chevelle + GTR Doorhandles
• GTR Door Handles on th...
Tesla C10's first burnouts!
• Burnouts in the Tesla ...
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
KENAPA INI TDK DI BUAT SEBANYAK BANYAKNYA DAN DI EXPORT ....
MOMEN KLASIK BANYAK YG SUKA DAN BANYAK IDOLANYA
Andrew, my man, it's a damper spoken damp-er. Lol 😆 Great work guys this build is coming together nicely.
This is gonna be a sweet ride.
We can't wait to get it ripping!
👍
Thanks for watching!!
@@SalvagetoSavage nice to see the work of the masters.
Sweet video love the progress you made on the C10, great engine sound, may need a resonator though!!
When I saw the color. I got a little excited that we were going to see the Chevelle! 😁
We got an update coming soon!
Lookin great, I always wanted a truck like that; a classic that can haul...ASS!
We're excited to get this thing tearing up the road soon!
the beast 💪
Can't wait to get her running!
are ya'll gonna do a Chevelle update soon? I love that car
Yup! We have one coming soon!
@@SalvagetoSavage thanks!! I love this build. It the Chevelle is my dream car.
You and me both brother
Daaaaaamn boi, I'm jelly like a Santa Belly foo ! She's a 'bute Clark.!🤪🤙
Muito top esse motor e animal
You know, "Oh-rings" is the shortened version of "Oh sh*t, I forgot to install these O-rings!"... 😂😁😇
Happens every time! lol
I love the way you went with the old school Chevy orange on the engine. Those pulleys are badass.
It fit so nicely with the paint!
Don't understand why someone can't make a hood hinge that allows the hood to open all the way like it should.
Looks great. The engine sounds a little off. Needs a tune. 🤣
Beautiful work boys. It's almost like you knew what you were doing.
Almost! lol
I`ll eat that glove if you let me take the plastic of that Supercharger....Best sounding motor ever...
We'll take you up on that offer! lol
Great show and great builds, you guys certainly have an eye for cool.
Perhaps don't show so much toxic overspray drifting away or the EPA may get interested...
We need to build ourselves a paint booth soon!
What kinda line did yall use for the hardlines I'm wanting to do the same with my car just debating on copper stainless or aluminum
We used steel. Copper would be a good way to go. If you get stainless, make sure it's annealed so it's easy to bend!
@@SalvagetoSavage that what I was thinking too with the stainless. I'd thought about brass even but it's so thin and softer metal I'd be afraid of blow outs in the line
Hi Mikey, the C10 is really coming along nicely. I love it. Last week in Australia we heard that parts of Florida was hit by a cyclone and lots of damage. I hope that you guys are not affected. Keep up the great work.
We stayed safe over on our coast! Thanks for checking in!
Yay!
Hope you enjoyed the video!
@@SalvagetoSavage Awesome vid.
That is an absolutely awesome engine!!! It looks so sick!! Very cool video!!
Thank you very much!
hard lines came out great. pretty sure I have that same tubing straightener.
It works amazing!
I would love to see all the chrome from the Wagner kit in a black chrome version. 😮 I think it would be sleek
That would look sick!
after learning to drive in my moms 72 fleetwood caddie i learned to love bling on some rides an that is lookin bad a$$ on this ride
Thanks so much!!
S2S is killin' it, love what you guys do!
That's so much!
Extremely impressive & expensive build, I must be getting old, watching all that work made me tired. I will never have enough time & $ to do this to my C10.
Thanks so much for the compliment! There are definitely a lot more budget friendly ways to get a similar result with your C10. It definitely takes a lot of time and labor but hotrodding is all about doing what you can with what you have available!
@@SalvagetoSavageIt would help if I was younger with a shop like yours.
Such a cool truck . I love to get hold of it and throw all that air ride crap in the bin and fit a set of springs
Yah some nice coil overs would be rad
That Whipple super charger looks awesome man. Can't wait to hear the 62 GROWL
We're so stoked to hear how it sounds!
Very nice! How much does a build like this run?
It all really depends on the condition of the vehicle you bring in! If you want a quote, message us on Instagram!
Beautiful engine !! Going to be an awesome build, can’t wait to hear it running !!
🤔 also whose black bicycle is that lurking in the background … can we see it close up and hear from the owner what went into it ??? Please
It's just a beach cruiser with some custom apes and pin striping!
Love that shit!! Bad ass build.
Thanks so much!
Nice ride! did you guys install expansion tank for the whipple or just over flow tank? or both
trabalho top demais✌🤙
I love this truck. You Guys are killing it. Great work
Thanks so much for the support!
I have a 60. I’d like to borrow a few ideas. Promise I’ll give you guys the props. Lol
Take all the ideas you want! Just tag us in the pics so we can see your work. We love to see what y'all end up fabbing up!
Do you guys have a discount code for anything? I’m actually going to order the holly lights today
@@ironman20725 yes there is a link in our bio (link tree) for a Holley discount
What kind of bs engine uses nearly 10 pully's 😂 God chevy weird as f sometimes
The truck is badass, man. At first, I was like, dude.! Triple H is getting a custom truck.
Engine noise ....classic....thought she had fired 🤣🤣🤣🤣👏👏
they should start using him for SFX in the next Fast & Furious movie! lol
@@SalvagetoSavage 🤣🤣🤣
This is not just a truck build. It is a piece of history and a work art. You guys should be very proud. This is work worth doing. 11:08
We really loved building this truck. It's easily one of our favorites after our 65 longbed stepside!
"exhaust manifolds"= Long tube headers. I learned something today
An LTH is just a manifold with longer, equal length sections.
What steering wheel is that? Sick build
Picked it up from CJ pony parts
I’m building a 63 c10 ls swapped and was wondering what headers you are running?
Dam I like the c 10
Don’t u love it when u put high performance new motors in old junky cars
Always respect and love y’all’s work.
Thanks so much!
Так и не поехала(
That chrome in the engine bay surely brought some brightness in there. Very nice!!! 👌
Thank you!!
am a ford guy but i can drive that thing all day
We're down to drive anything that has a bit of horsepower behind it!
Parabéns para toda a equipe pelo lindo trabalho!!!
great mechanics
Make a custom bash bar for the Z.
Once Andrew scrapes his old bumper off, we'll fab up a new one for the Z
Nice " MORE POWER "
You know it!
WHATS W/THE LINCOLN ON THE HOIST?
It's a continental we have some big plans for!
That's awesome man... Great job guys!
Thanks a ton!
Looks clean
Thanks!
Where did those plug wires come from?
Super bad
Thank you!
малярка на улице - это топ лэвэл)))
incredible content!
Thank you!!
Noice!... looks sick
Thank you!!
Hold up!! Do I see a suicide slab in the back ground 😍
You sure do!! we go a killewr building coming up on that soon
👁👃👁
DOPE!
Thank you!!!!
Awesome
Thanks!
Man it just keeps getting better
Glad you like it!
Awesome work! Thanks for the detailed follow up! Turning that ‘62 into a TEN , thanks Mike Andrew and David!
Thanks for tuning in!
Gonna be a mean C10 🔥🔥
We're so close to getting this thing ripping!
Where is Tim?
Tim left us a while ago
@@SalvagetoSavage aw, damn!
PLEASE EXPLAIN THIS TO ME? Why would you put a 3.0 liter supercharger on top of a 6.1 liter engine? My 6-71 makes 426 cubic inches a rev and I have it on a 352 cubic inch engine. It looks like your creating a bottle neck. This has been proven on people putting m90's on 5.3's
We not going to mention the fact this dude copied hoonigan and their font😂😂😂
You have 0 uploaded videos! Make sure you have the ability to create before you criticize!
@@SalvagetoSavage what does that have to do with copying someone else😂😂 I can easily go copy someone's format like y'all and boom. What you said makes 0 sense my boy no wonder you had to copy. No original ideas
Hello!
Sweet!
glad you like it!
@@SalvagetoSavage
Only a lot!
Молодцы! Работа мечты!