Use my link ridge.com/staytuned to get up to 30% off through December 20th and enter free for a chance to win a Ridge bundle worth $4,000. Video Sponsored by Ridge.
Why do all of the guys on car videos channels , turn in to comedians and take away from the content of the video . seen fake to over reacting to cutting a bolt , screwing around will get someone hurt .
So many car channels focus on rare cars or expensive cars that I have little to no chance of ever owning. I love the videos about vehicles i might actually be able to have as a project of my own one day
This has been one of my favorite builds so far. There is nothing here that I can't do or can't afford. That means a lot to me. Keep up the great work guys!
These odd ball cheap projects are what so many guys need right now for motivation. Too many 6 figure builds on social media right now. Get it rolling then worry about getting it right.
@@StayTunedTA I had a 64 m100 long bed removed a bunch of leafs from it laid it on 17” ram steel wheels a lot like the police wheels 300 6 4 speed with 3.00 gears. Unfortunately I had to sell it before I got to drive it but it was such a cool truck and I will build another one when my kids are older.
The soon to be lost art of carburetor setup and rebuilding. It is about time Barb dusted off this Dodge, perfect shop truck. Also I love watching this channel grow! Whoever is editing the videos, you are doing great.
You guys are my current favorite auto channel. Like the variety of projects, footage, background music, conversation and jokes, and the pace. Great stuff - thank you!
Mr. B. Here ! 👀😎👍. Finally you guys are showing those who think that spending a lot of money to build a killer truck is not realistic ! What has been done is killer ! 🍕🍕🍺👍👍👍👍
8:27 re: Z-bar linkage. An external hydraulic system has advantages (especially self adjusting), but a mechanical Z-bar setup can be REALLY nice if you replace the cheap factory wear-prone pivots with heim joints. My CJ7 was a mess to shift before the simple heim joint swap and now it's by far my favorite clutch to use. It feels like a bolt action rifle. My 5.0 MGB is getting a Nissan truck hydraulic cylinder on the T5 because joining the factory master via 3an braided is easy peasy. The builds on this channel are some of the best out there.
the trick on my 77 Nova 350 4spd. is to only use the clutch from a dead stop. and upshift w/o the clutch! work suprisingly well for the old saginaw M21! ive never used the clutch to slow down w/ my old car i let it in neutral and use the brake. since they are cheaper and easier to replace! 😁
Thanks for showing the 72-93 Dodge trucks some love. This could have easily been another C10 revival 🤦♂️ Also thanks for the detail you shown on how to flip the rear and lower the front. Lots of questions get asked on the group pages about this and from now on I will reference this video
Grew up with a 1974 two-tone (yellow-beige/cream) Dodge D200 that my Dad flew to Detroit for in order to get the exact specs he wanted. Had a 440 ci V8 engine in it! Dad intended to put a camper on, but it ended up being his work truck most of his life. Had some great memories driving in that thing!
I watched too many Emergency! reruns as a kid. Always wanted one of those Dodge trucks. Had a 91 S-10, loved the Sike-clone too. You're really hitting them out of the park right now. Plus we don't have to wait months for a 10 part series. Bought a hat and shirt a few months ago. Should've waited so I could grab a Sike-clonse shirt.
Down and dirty! Confetti pop was the icing on the cake. Great little attainable type of build. Like a lot of guys in the comment section this is quickly becoming one of my favorite channels. So many fun builds going on. Can't wait to see what's next, guess I just better ... STAY ⚡️ TUNED
Id love to work in a place like this. Just helping out on super crazy, nasty hot rods all day with the boys. All the builds lately have been killer, shout out NEPA!
That should definitely be a shirt especially for us here in the Northeast, "if it's on the car it's patina if it's on the floor its rust". Chefs kiss fur sure.
Thats what i was hoping. I am a mopar guy and ive heard a slant 6 can b built up and b wicked. Unfortunately ive never seen it. I have dreams of doing it myself in some oddball mopar some day
From one Pennsylvanian to another, Great video Tony! Love the channel, you and the crew look like you really enjoy working together. Ordered the new sweatshirt. I also have the Angelo's Gym and the Firebird 3/4 sleeve shirt.
You guys should've been building hot rods in the early 60's. The creativity and talent is through the roof! That sub $1000 truck is worth daily driving now!!
I'd like to see the guys put an aftermarket cam in this little six cylinder and maybe an aftermarket intake manifold and headers if they exist. Wring that little 6 banger out!
I learned one thing doing ball joints in D100. Dodge with the screw in ball joints after you tighten them down bring the mig welder over & Tach each ball joint in all the way around. Because most likely the threads aren't able to hold them anymore. First one i did 2 days later both uppers completely popped out. I tached each ball joint on each side of every point on the hex with 1/8" long bead. Haven't had any issues since.
Projects like this make me hate my state even more. This truck would be $5,000 “Parked when ran but half of engine is gone and I’m keeping the tires, battery, gas, and you have to remove those for me and you’re not allowed to drive a trailer to it so you’ll have to push it up the hill 300 yards to the street after you’ve removed everything I’m keeping. No lowballers.”
@@StayTunedTA I had a '78 two tone longbed 4spd 318 back in the mid 90's. It was questionable at best, but nothing I've had since scratched that farm truck itch the same way.
This is what the car community needs. Real dudes, working on real cars(or trucks) that arent show pieces. They're rusty and neglected. And it doesnt take several thousand dollars to have fun.
I drive this pickup, it is my first pickup and I just watched all of the episodes on this and wow.... I think I know what I might do on mine. I wasn't sure what I wanted to do on it but this has given me plenty of inspiration... Thank you!
You guys are the best. My Dad is from Hellertown and my Mom is from Quakertown. Always enjoy the pizza scenes and hoagie runs. My grandparents were big on the birch beer, too. Keep rockin - love the truck.
I agree with the previous comments. Beaters with heaters is what most of us can afford to build and seeing channels actually do that in a fairly reasonable budget is absolutely what we all need right now.
You rocked it on Hot Rod Garage....now rocking on your own YT channel. Great work! Love the fact that your shop is literally a few miles from my house. SC in the house!!
Bought a 73 D100 at government auction in Idaho in 82 Faded paint allowed me to read GSA MOTOR POOL on the doors 318 granny gear np 435 Trans 83/4 rear Drove that beast well into the 90s Bulletproof!
Here’s a tip for anyone. If you put a glove or 2 with a zip tie around the tail end of the trans it helps catch the trans fluid that’s coming out. And also u can squeeze the glove to put the lost trans fluid back in. 🔥🤙🏻💯
Picked up an 85 D150, a few dings but no rust. $1700, slant six and 4spd OD. The block is cracked, he had straight water in it when it got to single digits last year. I’m swapping in a 318 magnum with a carb soon. Next year it’ll get a 5.7/8spd. It’ll get the van LCA swap and some drop hangers. The 8.25 will have to get swapped for a 9.25 when the Hemi goes in. This will be my son’s truck eventually. I’m hunting for a 72-80.
I've heard many times over the decades you can't kill the slant six, but I grenaded my ex's in her 68 satellite just driving it normally. It gave me an excuse to hop up a 318 from a 70-71 Challenger, threw a 360 cam and x heads with Blackjack headers some turbo 400's with 2 1/2" exhaust off my defunct 440 barracuda and it was a hot screamer!😲👍 The slant sacrificed itself for better things. Cool deal with the truck.
4 buddies in a single cab d150/100, reminiscent of my high school days. Lifted not lowered for mine though. Love someone fixed these trucks up. Love the late 70/early 80s for low riders Edit: the dashes are perfect. So much better than my late 80s/90s
I just started a '79 D100. Basically the exact same truck. Mine is a 318. Thank you for this video. Because I am on Ole Fat man working outside, mine is taking more then 2 days! Please do more vids on this truck!
Cool truck, My dad has one like this, but it's a 77 2 wheel drive short box 440 all original. We live in Wisconsin and it just so happened a older lady in her 60s from Florida drove it up here to visit some family members and reverse went out in the transmission so she sold it to my dad for $600. That was back in 1992 and it been sitting in my dad's storage shed since then. These old Dodges were always my favorite out of the main 3.
These trucks were the embodiment of cheap reliable transportation. Hopefully can you keep it stockish. And just make it a great truck. A reliable partner for everyday life.
Use my link ridge.com/staytuned to get up to 30% off through December 20th and enter free for a chance to win a Ridge bundle worth $4,000. Video Sponsored by Ridge.
Please don’t let Tony lose the Shop!🤣🤣🤣
Junkyard digs, pole barn garage keep it pretty low buck as well as old vice grip garage a few others too
Why do all of the guys on car videos channels , turn in to comedians and take away from the content of the video . seen fake to over reacting to cutting a bolt , screwing around will get someone hurt .
Are we restocking medium crew neck sweatshirts 👀
So many car channels focus on rare cars or expensive cars that I have little to no chance of ever owning. I love the videos about vehicles i might actually be able to have as a project of my own one day
Awesome! We keep it pretty down and dirty here!
There's room for all of the channels and I appreciate them, but I'm with you, save a few checks and have fun.
Why do you even watch those channels to begin with?
@StayTunedTA 💯% keep up the amazing work and content
@@alexcoronaI occasionally like seeing shiny new parts being put on. I'm sick of the will it run videos with basic carbureted cars.
This has been one of my favorite builds so far. There is nothing here that I can't do or can't afford. That means a lot to me. Keep up the great work guys!
These odd ball cheap projects are what so many guys need right now for motivation. Too many 6 figure builds on social media right now. Get it rolling then worry about getting it right.
Agreed! So many smiles already cruising this thing around, its awesome! and he can upgrade from here.
@@StayTunedTA I had a 64 m100 long bed removed a bunch of leafs from it laid it on 17” ram steel wheels a lot like the police wheels 300 6 4 speed with 3.00 gears. Unfortunately I had to sell it before I got to drive it but it was such a cool truck and I will build another one when my kids are older.
The stance and the wheels!!! Perfecto!!!
The soon to be lost art of carburetor setup and rebuilding. It is about time Barb dusted off this Dodge, perfect shop truck. Also I love watching this channel grow! Whoever is editing the videos, you are doing great.
You guys are my current favorite auto channel. Like the variety of projects, footage, background music, conversation and jokes, and the pace. Great stuff - thank you!
yeah they nailed it.
Mr. B. Here ! 👀😎👍. Finally you guys are showing those who think that spending a lot of money to build a killer truck is not realistic ! What has been done is killer ! 🍕🍕🍺👍👍👍👍
Right? Just get it back and running down the road!
8:27 re: Z-bar linkage. An external hydraulic system has advantages (especially self adjusting), but a mechanical Z-bar setup can be REALLY nice if you replace the cheap factory wear-prone pivots with heim joints. My CJ7 was a mess to shift before the simple heim joint swap and now it's by far my favorite clutch to use. It feels like a bolt action rifle.
My 5.0 MGB is getting a Nissan truck hydraulic cylinder on the T5 because joining the factory master via 3an braided is easy peasy. The builds on this channel are some of the best out there.
Oh, that does sound cool and not too bad to do, would be cool. I like a direct linkage. Appreciate the support!
What did you use for a slave cyl?
the trick on my 77 Nova 350 4spd. is to only use the clutch from a dead stop. and upshift w/o the clutch! work suprisingly well for the old saginaw M21! ive never used the clutch to slow down w/ my old car i let it in neutral and use the brake. since they are cheaper and easier to replace! 😁
So awesome to see friends build a truck on the cheap and celebrate like brothers! Great work she's a looker!
Need to build the slant 6 with a cam, four barrel + intake, port the head and headers! Clifford performance has all the goodies!
Offenhauser makes good stuff for the 225 Slant 6 as well
Oh look it's the best time of the week... Barb is gonna love it.
I smell slant six upgrades incomming
Yeah, he's pumped! It turns out great! thanks for watching!
Thanks for showing the 72-93 Dodge trucks some love. This could have easily been another C10 revival 🤦♂️ Also thanks for the detail you shown on how to flip the rear and lower the front. Lots of questions get asked on the group pages about this and from now on I will reference this video
We need some of the Angelo's garage hoodies there cool !!!!!!!!!
Maybe we can bring that back again, crew necks for now!
WHOOO HOOO STAY TUNED!!! LEANING TOWER OF POWER!!
Let's go! 6 in a row, and away we go!
Next project: a turbo and holley sniper for the slant six. Please don’t swap the engine.
"Dirty White Boy" Perfect classic rock name for this rig. LOL
Grew up with a 1974 two-tone (yellow-beige/cream) Dodge D200 that my Dad flew to Detroit for in order to get the exact specs he wanted. Had a 440 ci V8 engine in it! Dad intended to put a camper on, but it ended up being his work truck most of his life. Had some great memories driving in that thing!
Six in a row, ready to tow!! Great vid again gents. Didn’t know Barb did the thumbnails, the boy has skills, they always look great lately
The stance of that truck just put it on a whole new level of bad ass!
Grandpas are loosing thier minds everywhere!😂😂dag nabit! 35:20
I was so outraged the onion fell right off my belt!
I watched too many Emergency! reruns as a kid. Always wanted one of those Dodge trucks.
Had a 91 S-10, loved the Sike-clone too. You're really hitting them out of the park right now. Plus we don't have to wait months for a 10 part series.
Bought a hat and shirt a few months ago. Should've waited so I could grab a Sike-clonse shirt.
Man that brings back memories. Leaning tower of power!
Yeah, same here! We were always in something with a 225 in High School.
OH HELL YA! It never ceases to amaze me how much the stance and tires, and wheels make! Really a good looking truck! PEACE ✌️
I love these dudes god damn
HA thanks! We love ya right back!
You’re one of my favorite shows boys keep rocking 🤘🤘🤘Let’s Goooo
Rock on! Appreciate you!
Hot rod that slant 6! Torque Storm has a supercharger for it and AussieSpeed has tons of other parts. Way cooler then an engine swap
Down and dirty! Confetti pop was the icing on the cake. Great little attainable type of build. Like a lot of guys in the comment section this is quickly becoming one of my favorite channels. So many fun builds going on. Can't wait to see what's next, guess I just better ...
STAY ⚡️ TUNED
Id love to work in a place like this. Just helping out on super crazy, nasty hot rods all day with the boys. All the builds lately have been killer, shout out NEPA!
Even the grimiest white trucks come out nice. Best color for old pickups, hands down.
Absolutely fantastic build, this is what it is all about. What a team, great effort. Thank you for sharing with us.
That should definitely be a shirt especially for us here in the Northeast, "if it's on the car it's patina if it's on the floor its rust". Chefs kiss fur sure.
Awesome video great crew and great content Tony, and as usual the pizza looked good.👍👍
Thanks 👍 Appreciate all the support!
It’s super sick to see a slant six on one of my favorite channels. Always love seeing them and old 300 fords
you need to find a "super six" two barrel carb and intake!
I'm on the hunt now! and maybe a t3 to cram boost in to it!
I know this isn’t in the plans, but would love to see you build up that leaning tower of power. Cam and turbo!
AGREED! He's got a 5.9 magnum but maybe a few LBS of boost could wake this thing up for awhile!
Thats what i was hoping. I am a mopar guy and ive heard a slant 6 can b built up and b wicked. Unfortunately ive never seen it. I have dreams of doing it myself in some oddball mopar some day
It's a good motor. Here's a slant build!
th-cam.com/video/I7daGYuiD6U/w-d-xo.htmlsi=LZN4Batv_NUId7Hp
Hemi head swap from down unduh?
Engine masters did one,worked great @@christronvold6045
You should name the truck Elbow Grease. Great job as usual guys!
From one Pennsylvanian to another, Great video Tony! Love the channel, you and the crew look like you really enjoy working together. Ordered the new sweatshirt. I also have the Angelo's Gym and the Firebird 3/4 sleeve shirt.
HellYeah PA Boys!!!
Thanks! Appreciate the support! We had a blast this week, a ton of laughs and this truck turned out killer.
As another PA dude, this video was great. Love to see old junk brought back to the streets. Killer project man
You guys should've been building hot rods in the early 60's. The creativity and talent is through the roof! That sub $1000 truck is worth daily driving now!!
What a creative spectacle here ! Bravo STAY TUNED team
Thanks! It was a super fun shoot!
Manual gears even with less power is still great fun 😀 ! ! !
When Tony called him chip foose, I lost it lol. By far the funniest episode ever.
HellYeah Boys. Wife ordered me a Stay Tuned hat and Tshirt for Christmas. Just arrived today. Beer and a Slice Time. Ready to Stay Tuned!!! 🤘🤘🔥
Awesome! Let's go bud! Your wife sounds like a keeper! Merry Christmas!~
@@StayTunedTAYou made it a merry Christmas with that quick shipping. Ha ha ha. She’s definitely a keeper 🤣🤣🤣Merry Christmas to you and your fam too
Hell yea, thanks for watching!
@@BarbalinardoInnovations Barb Rules! Merry Christmas to you and your fam. 🤘🤘
Building one rocket after another! 🔥🛻🚀💪🏽🤘🏽✌🏾
might not be a rocket, but we will get there!
That D150 rocks!! You truly are a beacon of creativity!😂😂
Stay Tuned rules!! 👍🏁🔥
Yessssss! Friday ST party time :D new truck looks like fun!
It's awesome! Thanks for watching!
That confetti cannon was hilarious! The look on Tony's face was priceless 🎉
hey from Dublin Ireland , Grand job lads
Thanks! Appreciate ya!
i love videos like this. awesome channel and crew. as a mopar fan this pushed all the right buttons.
Borgeson steering shaft is one of the best bang-for-your-buck upgrades for steering on these old dodges.
Super cool little build, Mr Barb.
Agreed!
love it guys! so glad to see someone actually excited about a slant 6 80 dodge!!!!
Awesome content as usual Tony and crew!
Much appreciated!
Luv the early dodge. Currently building a 1957 dodge town wagon. 1991 front vette clip and a 4link coil over rear. Rock On.
Absolutely loving the East Coast content. Crushing it!
I'd like to see the guys put an aftermarket cam in this little six cylinder and maybe an aftermarket intake manifold and headers if they exist. Wring that little 6 banger out!
You can most definitely get a 4 barrel intake and headers for the slant 6. Dual exhaust etc. They sound pretty decent if I remember correctly.
A truck needs torque, maybe an RV camshaft
Man! That’s the truck I’ve been looking for too and you got it for 800 bucks! Awesome! What a concept an affordable auto channel, I like it!
1st gen homie. 2nd is from 94-02
YES! I knew that. I swear.
I didn’t wanna say it haha
I learned one thing doing ball joints in D100. Dodge with the screw in ball joints after you tighten them down bring the mig welder over & Tach each ball joint in all the way around. Because most likely the threads aren't able to hold them anymore.
First one i did 2 days later both uppers completely popped out.
I tached each ball joint on each side of every point on the hex with 1/8" long bead. Haven't had any issues since.
What a sweet truck. I'm happy for you Barb. I really like that you guys are having so much fun in the shop and the celebration after.😂
love the look of this machine, as a guy would say "nice going to town rig".
Projects like this make me hate my state even more. This truck would be $5,000 “Parked when ran but half of engine is gone and I’m keeping the tires, battery, gas, and you have to remove those for me and you’re not allowed to drive a trailer to it so you’ll have to push it up the hill 300 yards to the street after you’ve removed everything I’m keeping. No lowballers.”
What state is that? Sheesh
Haven't watched yet, but these old D series Mopars are near to my heart.
They are just such a cool shape! So underrated!
@@StayTunedTA I had a '78 two tone longbed 4spd 318 back in the mid 90's. It was questionable at best, but nothing I've had since scratched that farm truck itch the same way.
You guy’s are killing it. A bunch of buddies wrenching on rusty stuff. Great vibes
This is what the car community needs. Real dudes, working on real cars(or trucks) that arent show pieces. They're rusty and neglected. And it doesnt take several thousand dollars to have fun.
All I want for Christmas is Stay Tuned shop bibs.
OK! We're working on it!
Tony and the guys are now responsible for driving up prices on D100 and D150 short beds. Lol. Awesome video as usual!!
The truck turned out awesome. . Freaking love the energy in the stay tuned shop.. you guys kill it every time and tony you're a freaking Rockstar..
Thank you for being a builder for normal people. Love your channel. Wish more tubers would go this route.
I drive this pickup, it is my first pickup and I just watched all of the episodes on this and wow.... I think I know what I might do on mine. I wasn't sure what I wanted to do on it but this has given me plenty of inspiration... Thank you!
You guys are the best. My Dad is from Hellertown and my Mom is from Quakertown. Always enjoy the pizza scenes and hoagie runs. My grandparents were big on the birch beer, too. Keep rockin - love the truck.
That is awesome! Thanks for watching!
Brings back memories of my 76 d100 I restored was a 318 auto, hemi orange from the factory great truck, thanks for this channel!
Just want to say it Tony and crew, loving the channel. It's super cool to see you guys be a team.
I had a 74 Dodge Dart with a slant 6. It was a tank. Awesome job guys. Love it 🍻👍
I rode to HS in one of those and we couldn't hurt it, my buddy bought it for 150 bucks.
I agree with the previous comments. Beaters with heaters is what most of us can afford to build and seeing channels actually do that in a fairly reasonable budget is absolutely what we all need right now.
You rocked it on Hot Rod Garage....now rocking on your own YT channel. Great work! Love the fact that your shop is literally a few miles from my house. SC in the house!!
Really turned out to be a sweet little truck!! Goes to show not, everything needs 1000 HP to have fun!!
Great budget build there used to be a company Clifford research that made 4 barrel manifolds and headers for the slant 6 😁👍🤙
Bought a 73 D100 at government auction in Idaho in 82 Faded paint allowed me to read GSA MOTOR POOL on the doors 318 granny gear np 435 Trans 83/4 rear Drove that beast well into the 90s Bulletproof!
I always loved the old dodges like this one and the ram chargers.
Gotta love how much fun you guys have doing this.
Tony benchpressing transmissions again!!! -"Its HEAVILY patinad" -"HELL yeah!!!" Yall are relatable as hell
Lowered trucks are the best! So much easier to get in and out and loading stuff in the back. And of course looks sooo much better
Big tyme fun... You fellas are a blast! Nice choice on droppin that truck lil bit, made it like candy...🖐
Tony froths showing off his Manual transmission lifting skills.
Come on guys! Strap a turbo on that thing!
Greetings from Cape Town, keep ripping!
Hey thanks! Cheers!
Here’s a tip for anyone. If you put a glove or 2 with a zip tie around the tail end of the trans it helps catch the trans fluid that’s coming out. And also u can squeeze the glove to put the lost trans fluid back in. 🔥🤙🏻💯
That’s awesome that you value your employees that much to help them out while profiting. Keep it up guys I do enjoy your channel
Picked up an 85 D150, a few dings but no rust. $1700, slant six and 4spd OD. The block is cracked, he had straight water in it when it got to single digits last year. I’m swapping in a 318 magnum with a carb soon. Next year it’ll get a 5.7/8spd. It’ll get the van LCA swap and some drop hangers. The 8.25 will have to get swapped for a 9.25 when the Hemi goes in. This will be my son’s truck eventually. I’m hunting for a 72-80.
I've heard many times over the decades you can't kill the slant six, but I grenaded my ex's in her 68 satellite just driving it normally.
It gave me an excuse to hop up a 318 from a 70-71 Challenger, threw a 360 cam and x heads with Blackjack headers some turbo 400's with 2 1/2" exhaust off my defunct 440 barracuda and it was a hot screamer!😲👍
The slant sacrificed itself for better things.
Cool deal with the truck.
Leaning tower of power baby!!
Awesome transformation! Happy for Barb. That stance 🤌
i love this show. you guys are the best. everyone is nice and authentic, nothing is fake
I love these old dodge pickups, the factory slant six may not be the fastest thing around but they will run forever lol.
It runs like an absolute top!
It looks so great! What an awesome truck!
Turbo slant six are the best!!
Y'all should get that clear coat that VGG sells for this truck. It would make it look so damn good!
Actually he already sent us some, just no time to get it on, round two!
@@StayTunedTA Now that's awesome! Can't wait to see you guys get that done in the next episode for this truck!
4 buddies in a single cab d150/100, reminiscent of my high school days. Lifted not lowered for mine though. Love someone fixed these trucks up. Love the late 70/early 80s for low riders
Edit: the dashes are perfect. So much better than my late 80s/90s
Another great video👍👍👍 Slant Six Pickup
Glad you enjoyed it! thanks for watching!
I just started a '79 D100. Basically the exact same truck. Mine is a 318. Thank you for this video. Because I am on Ole Fat man working outside, mine is taking more then 2 days! Please do more vids on this truck!
Cool truck, My dad has one like this, but it's a 77 2 wheel drive short box 440 all original. We live in Wisconsin and it just so happened a older lady in her 60s from Florida drove it up here to visit some family members and reverse went out in the transmission so she sold it to my dad for $600. That was back in 1992 and it been sitting in my dad's storage shed since then. These old Dodges were always my favorite out of the main 3.
These trucks were the embodiment of cheap reliable transportation. Hopefully can you keep it stockish. And just make it a great truck. A reliable partner for everyday life.
You guys are doing an awsome job creating some great and interesting content. Keep it up! its refreshing watching actual car guys work on stuff.