Bless you, sir. Do not underestimate the good you’re putting out into the world by sharing this stuff. I had a terrible day today made more terrible by not being able to close my bike in the garage at 11 pm. I watched you video and then, squatting on the garage floor surrounded by disgusting hopping insects, **fixed it my damn self**!! If you’re ever in the NYC area, there’s a beer here with your name on it. Thank you!!! 😄🍻
Well I sure appreciate it anytime i can help someone out! I know the definition of a terrible day all too well and seen far too many for my lifetime…it’s time to start on the good days now!! 🍻Cheers!!!
Thank you so much Paul!! I called them because my garage door was not staying down-shut, it would touch the ground and go right back up, and it was as he said as simple as moving the little travel-knob just a bit down and it worked!! You are amazing I cannot thank you enough!
This is the best home improvement video. This man deserves a huge check! I just watched his video and was able to fix our garage door in a a few minutes! What a wonderful instructor!
Finally, a worthy video that actually shows the details that we all need instead of some basic things that we already had figured out on our own..... thanks so much for the thorough and informative video. You helped a lot!
Thanks so much!! I watched at least 8 videos on how to fix this issue, and yours was the first with the actual solution. My light was green, but it still wasn't closing. Your movement test was the key that everyone else missed. 👍🏻👍🏻
Thank you All-Pro Quality Garage Doors! For over a week my garage door has been able to life by remote control yet it would not go down by remote control. After watching your video, I aligned one sensor, waited for the green light to illuminate and just like that, my headache was gone! What an was fix! Thank you!!! thank you!!! Thank you!!!
Thank you. I watched the first part, I have a Chamberland drive. My cause was a broke wire to the amber sensor, which caused the green LED not to work also. This saved me alot of money since I repaired it myself. Thanks again.
THANK YOU, THANK YOU!!! Your video saved the day, and probably a repair bill as well!! :) Forever grateful!!! I'm a 66 year old woman, and feeling enpowered again ::)
Great Video! Thank you. Had issue after moving some items around in garage and accidentally disconnected the tiny wire harness on my old Genie Screw Drive sensor. Door would not close with remotes and had to hold down wall button and even then the door would stop 80% down and go back up. I disconnected all the small connector harnesses from each sensor and made sure to reconnect them snug. Did the same to the harness at the unit and made sure the sensors were aligned like you showed here. Works Fine now, you saved an easy $80 bucks to have someone come out and look at this. Thanks again.
Thank you very much. First storm of the season here in Canada minus 20 centigrade with 65 kilometre winds and pitch black outside,so of course my garage door wouldn’t close. Watched your video and fixed the problem in less than 30 seconds.....a million thanks..
Thank you! This helped me fix my parents’ garage door after some movers knocked the sensor out of place. We had no idea why, after they left, the garage door wouldn’t close.
Thank you!! My husband and I replaced the rubber seal on the bottom of our garage door and we must have knocked the sensor out of place. You saved us from calling a tech!
I'm an older woman. Gotta tell you that you did such a great job with your video, it took me about 3 seconds to fix my garage door! You are awesome and I thank you.
Thanks for the video. I was able to align sensors to get the red to stop blinking. But, when I tried to take the door out of manual mode I couldn’t get it to reconnect. Finally got a ladder and realized pulling the cord toward the door wasn’t enough to re-engage. I pushed it opposite direction...toward the motor and it’s back to automatic mode. Thx again for your help!!
I just saw you video went out saw the light flicking adjusted it and wow...the door is working!!! Thank you so much. Now I don't need my son-in-law to fix it.
I just knocked my receiving IR sensor out of alignment and was able to fix it in less than a minute thanks to this video. Thanks for the great explanation!
Came home went to close garage door. I got the 10 blinks. I was able to hold the button on the remote to power close it. Your video was on the money. Fixed in less than 5 mins. Thank you so much
I swept the garage and the broom knocked one of the sensors out of alignment when I was cleaning dust and dirt around a sensor. When I was finished the door would not properly closed. I saw one light was on and the other off. I watched some other videos and thought I might need to buy a new sensor to replace the sensor which did not have the light on. But then I saw your video and solution became clear. I adjusted the sensor with the light off until the light went on. Wow... the problem was solved. Thank you! Thank you!
Great detailed video. Light started flicking when trying to bring the door down from the wall switch and not responding from the clickers, checked the sensors and yes!!! Somehow the sensor that has the green light got disalligned so moved, cleaned off the dust and the door is working fine again. Thank you!!!!
Luis Aparicio.... that’s fantastic! If you hadn’t figured out that problem on your own it would have cost you some $$. Glad to see you got it working again with just a minor adjustment!
Thank you. You just saved me some $$$. The light keep blinking and door wouldn't close. Had no idea about 2 lights on the bottom (single female, lol) so I found 1 light was out. Jiggled the wires, light back on, door closes. Thanks to you 😚
@@jo_josi_si It usually will be wiring related like a loose wire at the motorhead or the amber led camera is dead and if that one is not transmitting then the green led one will be out as well because it only lights up if it’s getting a signal from the amber camera. They are only sold in pairs anyway, so swap em both if the wiring looks good.
This gentleman has made my life easier. He explains everything in clear detail, speaks slowly and makes me feel that I can do it. Great!
You just saved me the trouble of trying to get a service call the day before Thanksgiving, during a blizzard. Thank you, thank you, thank you!
Bless you, sir. Do not underestimate the good you’re putting out into the world by sharing this stuff. I had a terrible day today made more terrible by not being able to close my bike in the garage at 11 pm. I watched you video and then, squatting on the garage floor surrounded by disgusting hopping insects, **fixed it my damn self**!! If you’re ever in the NYC area, there’s a beer here with your name on it. Thank you!!! 😄🍻
Well I sure appreciate it anytime i can help someone out! I know the definition of a terrible day all too well and seen far too many for my lifetime…it’s time to start on the good days now!! 🍻Cheers!!!
This, along with my user manual, helped me re-align my eye-beam which was flickering and preventing my garage door from closing. Thanks!
Thank you so much Paul!! I called them because my garage door was not staying down-shut, it would touch the ground and go right back up, and it was as he said as simple as moving the little travel-knob just a bit down and it worked!! You are amazing I cannot thank you enough!
This is the best home improvement video. This man deserves a huge check! I just watched his video and was able to fix our garage door in a a few minutes! What a wonderful instructor!
B M .... Thank you for the kind words!! I’m glad I was able to help out! 👍🏻👍🏻
Finally, a worthy video that actually shows the details that we all need instead of some basic things that we already had figured out on our own..... thanks so much for the thorough and informative video. You helped a lot!
TheSilverSurfisher ....well I’m glad the video was what you were looking for and hopefully you got everything dialed in! Thanks for watching!
ÀQaa
Your videos are clear and easy to understand. Appreciate it, you helped me get a couple of things adjusted properly and now I understand how it works!
That's great Matt!! 👍🏽👍🏽
Thank you so much Sir, that was an Easy Fix, the receiver camera was misaligned able to fix it with your Help!
Thanks so much for your kind instructions. When I followed them and aligned the sensor light, it worked!
Joshua Yoon No problem, glad it worked out for you! Easy fix is always good!
Thank you Sir!!!! Once you explained it, it was an easy fix!!!! You saved me so much money. I can’t thank you enough.
Great video and explanation! Hint for the green light was spot on. Thank you so much.
Thanks so much!! I watched at least 8 videos on how to fix this issue, and yours was the first with the actual solution. My light was green, but it still wasn't closing. Your movement test was the key that everyone else missed. 👍🏻👍🏻
Excellent! My 32 yrs experience is starting to pay off!! Thanks for watching Dan!
@@ALLProGarageDoors ap
Thank you All-Pro Quality Garage Doors! For over a week my garage door has been able to life by remote control yet it would not go down by remote control. After watching your video, I aligned one sensor, waited for the green light to illuminate and just like that, my headache was gone! What an was fix! Thank you!!! thank you!!! Thank you!!!
Krish Ross glad it worked out for you and now your up and running again! 👍🏻
It is Sunday 9PM and my garage door would not close. Watching your video on how to align the sensors did the trick. Thank you very much !!.
OMG!!!!!!!!!! I watched the 1st 2.30 minutes of your video and my garage is working again. Thank you!!!!
Niccole Graves I am privileged to be of assistance and glad your back up and running!!!
Thank you sir!! The vibration was causing misalignment... Just moved it a little and now it's working properly again. Cheers 🍻
Thank you. I watched the first part, I have a Chamberland drive. My cause was a broke wire to the amber sensor, which caused the green LED not to work also. This saved me alot of money since I repaired it myself. Thanks again.
THANK YOU, THANK YOU!!! Your video saved the day, and probably a repair bill as well!! :) Forever grateful!!! I'm a 66 year old woman, and feeling enpowered again ::)
No problem at all Sydney, glad you got it adjusted and are up and running again!
All-Pro Quality Garage Doors Inc. what do I do if the light on one of them isn't on?
Great Video! Thank you. Had issue after moving some items around in garage and accidentally disconnected the tiny wire harness on my old Genie Screw Drive sensor. Door would not close with remotes and had to hold down wall button and even then the door would stop 80% down and go back up. I disconnected all the small connector harnesses from each sensor and made sure to reconnect them snug. Did the same to the harness at the unit and made sure the sensors were aligned like you showed here. Works Fine now, you saved an easy $80 bucks to have someone come out and look at this. Thanks again.
Jesus Martinez glad you were able to get it sorted out and back up and running again! We sure appreciate you watching!
Thank you very much. First storm of the season here in Canada minus 20 centigrade with 65 kilometre winds and pitch black outside,so of course my garage door wouldn’t close. Watched your video and fixed the problem in less than 30 seconds.....a million thanks..
Glad to help out a fellow Canadian!! 👍🏽
Thank you! This helped me fix my parents’ garage door after some movers knocked the sensor out of place. We had no idea why, after they left, the garage door wouldn’t close.
Thats great news Shatil, glad you were able to get it figured out!Thanks for watching!!
Thanks for the video .it is really helpful. My garage door sensor was out of alignment and now its fixed after watching your video. Thanks
Thank you for the informative video. It saved me service call. Took me about 10 mts to fix the beams as shown in the video. Thanks so much!
CAE Engineers, LLC. No problem CAE .... thats why we’re here, easy fix for sure, glad to help out.
Excellent explanation and after following instructions repaired my remote. Thank you after watching too many videos this video worked.
my man you've saved the day. My garage door wasn't closing and it was the receiving sensor out of alignment just as you showed me. Thank you.
Glad to help out Charlie!!
I watched this video and went outside to fix my problem. Done! Thank you so much for this video.
You solved my problem! Straight and to the point. Thanks for the video!!!
madimari1 Thanks Mad! 👍🏻
Thank you!! My husband and I replaced the rubber seal on the bottom of our garage door and we must have knocked the sensor out of place. You saved us from calling a tech!
… and the wrong call could have gone bad quick and cost some serious money!
Best video on TH-cam! Fixed my problem in minutes!
Thanks man! Easy fix! Didnt have to wait for my husband or anything and I learned something new. All aligned!
Booya!!!! 👍🏽👍🏽
Thanks man - this helped me right away with one of my doors having a closing problem. Nice job explaining this and showing us what to do!
....and now you know what to keep an eye on! 😉 Thanks for watching!!
Easy, peasy, lemon squeezy! Thanks for saving me a chunk of change. Adjusted the sensors and we're back in business.
Tina Martin excellent!!
I'm an older woman. Gotta tell you that you did such a great job with your video, it took me about 3 seconds to fix my garage door! You are awesome and I thank you.
bjd Damb ......well there ya go!! Can’t beat that! 👍🏻
Hello pretty lady
Thanks. I just applied your fix. Works like a charm
Thanks for this. Helped me out and learned something new in the process.
Thanks for the video. I was able to align sensors to get the red to stop blinking. But, when I tried to take the door out of manual mode I couldn’t get it to reconnect. Finally got a ladder and realized pulling the cord toward the door wasn’t enough to re-engage. I pushed it opposite direction...toward the motor and it’s back to automatic mode. Thx again for your help!!
I just saw you video went out saw the light flicking adjusted it and wow...the door is working!!! Thank you so much. Now I don't need my son-in-law to fix it.
JonAnn Followell ... There ya go!! A win win for JonAnn!!!
Thank you! Such a life saver. Couldn't close my door for days! You are awesome!
Thanks Addison! Glad to be able to help out!! 👍🏽
Awesome video solved my problems. Thanks for posting!!!
No problem, thanks for watching buddy!
Great video. Just what I was looking for. Very clear explanation. Thank you.
Thank you for your video. Was just debris on the sensors. We did not think to check that! Feeling humbled...
Finally an easy turorial video that actually works, Thank you so much🙏
Glad it was understandable and helped you out! thanks for watching 👍🏽👍🏽
I just knocked my receiving IR sensor out of alignment and was able to fix it in less than a minute thanks to this video. Thanks for the great explanation!
No problem John, glad you had the idea to research it on youtube... saved yourself alot of money!
Oh my , it worked. Thanks I gave up then something told me to check TH-cam videos, yours was the first to pop up, I did this in 5 mins
Excellent!! Glad it worked out for you!!
Thanks a million, super helpful! Your step by step instructions are great!
No problem Moises, glad to be able to help out! 👍🏽
Came home went to close garage door. I got the 10 blinks. I was able to hold the button on the remote to power close it. Your video was on the money. Fixed in less than 5 mins. Thank you so much
Excellent!! 👍🏻👍🏻
Thank you , I just used your information and was able to fix my problem with my garage not going down when I hit the but thank you very much
I swept the garage and the broom knocked one of the sensors out of alignment when I was cleaning dust and dirt around a sensor. When I was finished the door would not properly closed. I saw one light was on and the other off. I watched some other videos and thought I might need to buy a new sensor to replace the sensor which did not have the light on. But then I saw your video and solution became clear. I adjusted the sensor with the light off until the light went on. Wow... the problem was solved. Thank you! Thank you!
David Flores ....Awesome! Glad it worked out!
Great detailed video. Light started flicking when trying to bring the door down from the wall switch and not responding from the clickers, checked the sensors and yes!!! Somehow the sensor that has the green light got disalligned so moved, cleaned off the dust and the door is working fine again. Thank you!!!!
Luis Aparicio.... that’s fantastic! If you hadn’t figured out that problem on your own it would have cost you some $$. Glad to see you got it working again with just a minor adjustment!
You just save my day with your video
Happy 2020
Thank you. I fixed the door so it closes now. Amazing!!
Very informative instructions. Easy to understand.
This video is great. It solved my problem. Sensor was flashing because of alignment issues. Thanks a lot
Glad to be of help! 👍🏻
Took me 3 minutes to fix my garage door issue due to this video! Thanks!
Glad to help out! 👍🏽👍🏽
Thank you. You just saved me some $$$. The light keep blinking and door wouldn't close. Had no idea about 2 lights on the bottom (single female, lol) so I found 1 light was out. Jiggled the wires, light back on, door closes. Thanks to you 😚
jamaica mango excellent job!! Now you’ll know what to look for if your door won’t close. 👍🏻👍🏻
Thanks for this! Just fixed my sensors. Super easy!
You’re a life saver... i just fixed it.. thank you very much
Thank you! I’ve learned something new and taught my son as well. Appreciate your help!
Excellent! It's simple but you gotta know where to start. 👍🏽
Wow! You just saved me at least $100 on something me a girl fixed in less than 5 mins. You are a true Blessing!
Thank you for the kind words! glad to help out! 👍🏽
My lift master was not working, just lights flicking, saw your video checked sensors and tada door working.......thanks!
Excellent!! TH-cam to the rescue again!
Thank you, sir. Just saved $60.00 on my home warranty insurance service fee with this video!!!
snapple726 indeed! Luckily you’re smart enough to realize the value of youtube!
Thank you sir, you have made my early morning better, I was thinking how to get my garage door fixed.
Glad to be of service my friend!!
6 1/2 yrs. later and you solved my problem. Thanks :-)
yomingjack ........Rome wasn’t built in a day my friend! 👍🏻
This helped me take care the problem. Thank you, Sir.
Hey! Thanks guy your video just saved me hundreds of dollars! Had it fixed in a minute flat thanks again!
Excellent!!! 👍🏽👍🏽
Super helpful and informative! Thank you, now it's a matter of getting out to the garage to fix the issue!
Good Luck 👍🏻 you can do it!
9 years later and this video still helping people .
Amazing isn't it!!! 👍🏽
I fowled your tips on the light bean and it work perfectly. Thank you.
Sweet!! Good job Miguel.
Fantastic - solved my problem strait away! the door now closes - hooray!
Thank you! I had something blocking the sensor....had no idea. Great tutorial.
Excellent Kathleen! Glad you took the time to research the problem yourself and solve it.
Thank you from a dude who is not handy! Got my garage door working right again!
👍🏻👍🏻
Awesome! Instructions were great and fixed my problem!! Thank you!!!!
majorcmyers 👍🏻
I adjusted the sensor and it now works! Thanks!!
Ya can't beat that...success!!!
You the best,you explun this fix simple practically easy.
Man!! You are a life saver appreciate you and the video!!
Glad to help out!!
So helpful! Thank you. Just used these tips again!
You are great at what you do and a big help, I really appreciate your presentation*****
Sam Stray .....thanks Sam! Any questions let me know!
Thank you! Fixed it in like 1 minute! 🎉
Appreciated this video helped me resolve my garage opener issue.Thanks for help
Bamsi Valluri 👍🏻👍🏻
Thank you! It really helped me fix the garage door! Bless you.
Glad to be able to help out! 👍🏽👍🏽
Mine is a similar genie-like yours and I'm having that same issue now. I am going again to have another look at it.
Totally worked. Thanks man.
Thank you, the video helped me out this morning... had one of the sensor out of alignment.
Tyler Tran Thanks for watching! Glad to help out!!
Very helpful video, such a simple fix and I had no clue. Thanks so much!!!
Excellent my friend glad it worked out👍🏽👍🏽
Great overview, thanks. Definitely helped with troubleshooting.
Anthony B. Smoak Always glad to help out! 👍🏻
Thanks so much! It was a life saver today!!
Thank you!! Worked like a charm.
Thanks for your video very simply and clear
Thanks, I had a similar problem and your video helped me to fix it.
sahsan fantastic! Thats why we do the videos.
Thank you for the informative instructions. U just saved me some money and frustration!
That’s the plan!!
@@ALLProGarageDoors can u tell me what if neither unit has a light on. Thank you
@@jo_josi_si It usually will be wiring related like a loose wire at the motorhead or the amber led camera is dead and if that one is not transmitting then the green led one will be out as well because it only lights up if it’s getting a signal from the amber camera. They are only sold in pairs anyway, so swap em both if the wiring looks good.
New subscriber, you just saved me $160.... Thank you sir
Active Dads Rule Derrick Culpepper ..... thats fantastic my friend!!
Great video! Good job breaking it down and explaining.
+HarrisonLive05 Thanks Harrison, glad to be of assistance.
Which I found this video years ago! Thanks alot
Thanks so much! Worked like a charm :D
Thanks for helping me think through my garage door situation
No problem friend.
Excellent video! You are a professional!
Tom Sazz Thanks Tom, I’m just glad to be out there and helping out!
This video helped tremendously
Thank you! This was so helpful.
Thanks. I fixed my door after watching this video.