Beginner's Guide to Brazing - RC4WD C2X Rear Cage
ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2020
- I go over the basics of brazing a rear cage together in this video, featuring the RC4WD C2X. This is definitely for beginners, but should get you started in the fun that is brazing!
Check your local welding supply, or hardware store (or Amazon) for all your brazing tools I mention in this video.
Get the fabrication tabs here: scalemetalsupplies.com/
Get a C2X here: bit.ly/375CUiE
Our merch is super cool: teespring.com/stores/scale-bu...
#rc4wdc2x
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Summer 2019 Stickers are sold (already) out but we're still offering patches! Check them out here: scalebuildersguild.com/forum/...
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuildersguild.com/forum
► Merch available here:
teespring.com/stores/scale-bu...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2. - ยานยนต์และพาหนะ
"Should always have somebody around that knows what theyre doing" *instant throwback to my best mate and myself at 10 years old grinding and welding together our own go kart powered by my mates old quad bike with not an adult in sight* 😂
Same thing when me and my bud where building my old race mower
@ 6:10 you can see the backround plastics starting to melt XD
A little melt never hurt anybody.
@@scalebuildersguild this is the perfect solution to that: Z-S1882 Trail Finder 2 Aluminum Side Body Posts $15.99 from RC4WD - they are replacements that are all-metal. I have installed them on my C2X.
It's official, Fire Still Burns!
Was gonna say the same thing I would have made sure that no plastic was close enough to melt or remove it
Also if on anything that has a structural impact a little melting is harmful
You had me at “That’s the puppy!”. Cool video.. I’ve never considered doing that but what a great resource if I ever do. Thank you!
I’ve tried brazing but I suck at it. I’m not giving up on it because I love the feeling of taking materials and making something cool and/or useful out of them. I’ve done it on my Chevy Apache project truck quite a bit and I want to bring it to 10th scale for myself as well. I have access to a welder to make all of the stuff I want to, but it’s a half hour away and I’d rather be in my shop where I’m most comfortable and can learn at my own pace. This video will definitely help me make some cool stuff for my rigs, so thanks a ton!
Always been something I fancied tackling..... now I may just have to. Excellent advice, I love your approach to everything Rc.
I need to get into brazing again. I did plenty of it in metal shop class 20+yrs ago. Great video as always!! 🏁💯
You got it pretty much in a nut shell. I was a pro brazer in a ship yard for years and you covered the basics
In the scale world brazing can look more scale and clean over welding. I’ve been welding all of my metal creations but I’d love to try brazing. Thanks for a great video!
... Just addicted to your Videos today, Matt!!
I've seen this one a few times before, but I always go back to it. When I've got a proper Work Area again, I'm definitely trying this! For years as a Mechanic, I've Brazed on a much larger scale (real Car Exhaust and such).
I've never tried it in small scale, but it looks doable.
Thanks for inspiring!!! 😉
Carmine ✈🚂🚙
6:25 that plastic to the right bubbling man...lol
Awesome video I've watched a few braising videos but after this one I think I might try it. You showed me everything that I need from a beginners perspective to go and start right away with minimal investment.
That was a very informative video. Great tips on Brazing. Your design and fabrication presentation was on point. I enjoyed it.
That’s cool.i haven’t brazed in years.i did it before I could weld.im going to try it on my next project.also you can get line benders that are like pliers.you can get a tighter bend.
Thank you for all the info I will be giving it a try here soon. Keep up the amazing work.
Thank you for uploading this I always wanted to know how to braze and now I will definitely give it a try
Matt - thanks for posting this! I’m gonna try my hand at cage work on my next build, a SCX10 II for Axialfest!
Cheers
Doc
Nice video Matt! I do have all that that you did show plus I have the Little Smiths torch. I love it! Nice flame size and percise brazing. It pretty much on heats up at the spot your trying to braze.
Brilliant video, thanks for sharing your knowledge and experience 👍
Thank you for sharing I've been looking into brazing for some time.
This is a real art form! Good work
I've been wanting to build a custom cage for my newest build, and was about to look it up, and this was in my recommendation list, thanks Matt, candy wait for the next live stream takeover next week
Really enjoyed this video 🤘 it's crazy how one video can change your day and get you going in another direction 👍
Fantastic video, I'll be attempting to do full body roll cage for my XJ. Stay safe, and keep your stick on the ice!
Awesome video! Thanks for the tips. Your one of my favorite subscriptions!
Thank you, much appreciated!
I need to make a specialized bumper for my scx24.
This video helped me say YES, I can do that!
Glad I could help!
Very much enjoyed the video on how to braze for RC crawlers. That is something I haven't tried yet and would like to give a go. Thanks!
You should!
I'm not going to do this, but I'm watching because I love your videos 👍
Really nice cage, thanks for the how to,I'll have to give it a try.
“...that’s you” Pup: “what kind of sorcery is this... I’m out”. I’d say your cage came out pretty sweet. I was thinking of recreating the Smittybuilt double tube roll bar, bumpers and sliders I had on my ‘Yota out of plastic but this has changed my mind. Time to get the torch out, now where the heck did I put that scrap tubing...
I use a micro torch. It's great for getting the heat into tight places and keeping it away from places you don't want it.
Also a chainsaw sharpening stone for use in a dremel is great for shaping the ends of the tubes for a no gap fit.
In the end your joints will be stronger and look better than ones with large gaps filled in with silver solder which itself is expensive especially when you have to use twice as much to fill gaps in your joints.
Great video man! 👍👍👍 I been thinking about trying brazing to make my own bumpers and cages! Great info thanks so much for sharing! ✌️😊
Nice video Matt I am definitely going to give brazing a go.
Looking good. Thanks for the info.
"Be careful!" Where's the fun in that? Shirley, I jest! Good video. I've been wanting to learn to braze.
Thank you for the helpful tips,i don't know Jack about brazing👍👍
Awesome video, thanks for sharing your expertise! Stay safe...
Thank u i have been wanting to make roll bar for my truck bed. Just didn't know how I could do it. The best part is I have everything I need already
Thanks for the tips, I have a bunch of bumpers and sliders needed.
I would so do this to an on road car chassis for the scale look. I’ve seen people use styrene but I think this might be even better and more accurate
Thanks for sharing your experience with brazing. I think it would be a very valuable skill to have for repairing or modifying your RC.
Glad you liked it!
LOL!! At 6:35 mark watch the side skirt or whatever that area was just melting from the flame. Good laugh, great video
Glad you enjoyed. A little melting never hurt anyone!
The shop gets hot at times
look pretty easy, but the fact so so so much effort to get this skill, thanks for sharing great brazing skill
I loved the demonstration of were the torch head gets attatched ' tap tap tap' lol love this guy
Good stuff! I started brazing today, found a dusty old set up that was used by former shop personnel a few years back. (Oxy Acetalin) super lucky and stoked to get to learn with this legit set up. I successfully brazed up some .250 stainless rod and made an effective and decent looking bash bar for the scx10.2. Learned a lot from your video, really appreciate it! You have a good personality for YouTubing holy cow! Awesome, hopefully we get to meet at an upcoming industry event this year!
Glad you're trying it out with some quality gear! Thanks for watching, and the kind words!
Really nice overview. I think I’ll try to make a bumper.
Awesome build bro!! 😍
Thanks for putting out this video. Brazing is something I will look into doing.👍
No problem 👍
Wow!, awesome video mate cheers....
Brilliant! Got to make an exo cage for my bc8 Mammoth. This is epic thx man
good video. pretty good basic brazing info. brazing rods from home depot or lowes or whatever will be cheaper than that silver solder yer using. I use a ts8000 torch but the flame is a little big, it works fine for small stuff you just gotta be a little more careful. for more precise heat placement a jewelers torch works best. I actually like the way a brass brazed joint looks on steel. it's a nice contrast, and, when you get to where you can run that solder in smooth it makes a very eye pleasing joint. tig welding these little projects is where it's at methinks. a lot more expensive to get set up, but, super precise heat and bond. the truck is lookin great. I enjoyed this video very much have a badass day 🤘🏻
Nice work 👍😄💪🏻
Definitely going to buy those tabs. Would help a lot
Great video, thanks for the awesome video. Totally SCALLER AF BRAH!
Thats Cool!!!
I envy your ability to produce. 👍👍
Cool Working , beaultiful.
Very nice job!
Dude! That short bed cage looks badass! I took the truck bed off my Element Knightrunner to do a similar and simple cage like yours. Sometimes less is better lookin!
Been wanting to try brazing for awhile. May get some tubing n give it a try. Also wanna try styrene as well
We all know that dog did all the work. :-)
Really nice Cage, In ypu are right doesn't need much more
Sweet thanks for the inline video:)
OMG Matt!!! You made my week!!! 😁😁😁 I've already got everything you mentioned except the Mapp Gas and Nozzle, Solder and Flux and a Bench Vise! Oh, and Brake Line. NONE of which sounds prohibitively expensive!! 😁😎
(I apologize up front. This will be LONG! There are things I feel like I need to say to you) 😃
Also as a Retired Auto Mechanic, and Custom Engine Builder, I've got OCD level pipe (Fuel and Brake Line) bending and trimming skills and am a pretty decent Welder.... 😉
I've seen other how to Tiny Truck Welding Videos, and was disheartened by the COST of the equipment to get the results they were getting. 😞
Could you please provide me with links or at least part descriptions for the MAPP apparatus, Silver Solder and Flux you use?? 😁
I've wanted to do custom Cage Work since I discovered the Tiny Truck end of the RC Hobby - from YOU, Chris @ GCM and Aaron at RCSparks in 2014!! 😎👍👍🇨🇦
That's true. I was disgusted with how RC Vehicles I kept seeing looked like Moon Buggies with tires sticking out of the Fenders by what looks like 5 SCALE FEET!!! 😖😞😡
I was doing a search for Model Railroading Videos, and "accidentally" stumbled upon your, Aaron's, Chris's and later, Josh's Channels. You helped me discover after a 9 year hiatus from the Hobby, that SCALE Modeling, my passion, had a big place in the RC Hobby!!! I thank you Sir, sincerely. 😉😎👍👍
Again I'm TERRIBLY sorry that in 2015, when we lost EVERYTHING, that in desperation, I reached out to the RC Community to try to get help rebuilding my collection and to start my new found Love, Scale Trucking!! I'm not a beggar, and contrary to popular belief, NOT a Scammer. Still don't remember who started that.
I'm pretty sure that your Friend Richard, will never talk to me again... I've made quite a few enemies in my improper means of trying to get help.
THANK YOU Matt, if you got to the end of this book!! 😉
PLEASE Stay SAFE! 😷
Carmine ✈🚂🚙
Might have to give it a try
I'd love to try brazing, it's looking great. I already had a soldering torch, solder and copper brake pipe, so I made do with that, as I'm still quite new to rc
Liam Payne welcome to the hobby 🤝✊
Turn the saturation up my guy
Edit: solid vid, very informative 😊
The dog was great, so understanding, almost looked like saying:"no way that's me, you for real?! Need to look closer, stay here"
great video, thanks for the info. it was fun watching that plastic body post melt with that close up too. a chainsaw file is the same diameter as brake line so it's perfect for coping the joints tightly. i like ice cream.
wow I had no idea it was this simple to get going. I know it will take time but after practice I am sure I can do it. O man have to get a cage going.
I got a scx10 ii cherokee on order, i was thinking of doing the same thing on front bumper. Use my Tig welder and weld a hoop bumper. You could probably solder this all together too. With .040 Tig rod at 5 amps should work. I probably wont need filler, can just melt metal together. 👍 on video. Great ideas
Good explanation - so i understand :D
Wow, your puppy looks EXACTLY like our last labradoodle...even down to the little bit of brown on the face! Awesome video :)
To figure out what your bends need to be use plumbing solder it has a large diameter & it bends easily & you can reuse it over & over for long tubes the shorter pieces not so much. This is especially helpful for interior cages. If you want to do a complete mockup you can use C A (super glue) to glue it together to see if you like it or not. I have a small oxygen propane torch I bought @ Lowes & I used the Lincoln Electric brazing rods. I am going to try the borax & brass wire technique like someone else mentioned in the comments next.
Thanks man. I appreciate the help.
Glad it helped!
Love your puppy!
I figured you might!
just dove into brazing and built 2 cages, was really fun. Hardest part for me is keeping the pieces in place and designing the part. I designed it adobe illustrator and printed out all the pieces and used that as a template. helped a little bit. anyhow. Fun to make stuff. Have you ever brazed steel rod not tube?
To this day, i use brazing for filling in rivet holes in jon boat projects! it's great.
Great video
"Super molten hot metal"😂
Great video, thanks!👍🏻
Brazing is awesome... I am doing may first steps with this... But I have made a new Stinger for a Chinese bumper, and so it looks way different an unique... There are a few videos of my red jeep on my very little channel.. So stay well an safe...
You made me want to go pick up some brake line. Torch and map gas
Hi Matt, Great topic. I am diving into fabricating a cage and was looking at options for brasing. One is the Bernzomatic with the small MAT tank found many hardware stores and the other is jewelry torch using acetylene and oxygen tanks and regulators. Obvious cost difference, but have you found the joints made with the simple Bernzomatic system to hold well? Thank you for putting this together - John
Great video as always! What are you using for your media blaster?
This type of project needs a lot of practice and knowing the basics of welding.
Nice, just found you!
Yes, full size tube chassis race cars were brazed back in the day, itself an extension of soldering.......BTW, it’s ALWAYS Science......with artisanship thrown in. I use a jeweler’s torch which is just a finer tip for more concentrated heat control, but normal “box store” torch can get the job done too. Sub’d 😎
I liked the video! .....quite inspiring. You earned my sub!
Awesome, thank you!
Thanks for the video Matt. I haven't tried brazing yet, but I want to. Might eyes kept getting bigger as I watched the plastic start to melt. I'm guessing better to braze off of the truck. LOL.
Very useful. Extra points for the pupster.
Glad it was helpful!
Great job thanks for the tips
Glad to help!
Excellent video. Thank you.
Glad you enjoyed it!
For my has or heat source I have a smaller hobby type torch that has a much smaller and finer flame point,almost a needle point plate and it works awsome!
Very cool!
Brazing is a good start into metal working as it does have a lower start up cost. Plus it builds off of soldering wires as a skill set. Since I own a MIG I tend to use it for my metal working.
Thanks for the great info Josh, I mean Matt 🤣🤣 The cage looks good 👍👊🔥
No worries! 😉
Yeah this really is a tricky process. Say what you like. lol Practice is a must. I have been working in a machine shop for over 25 years. This is a process I still struggle with. LMAO .. Great work bud and thanks for the walk through
Did I see a plastic body post start to bubble in the background. ;-)
Love the Dog...he looked to be going "I don't look like that. Hahaha
Remember, you can’t start a fire without a spark 😉
Thank you for the tips❤❤
No problem!!
Nice technique review.
I've been working up the gumption to make some bumpers for my Tamiya Mountain Rider 😞, but you might've just given me the confidence boost to fail at something new 😂
Go for it!
It's amazing.!!!!
The hardest part about brazing imo is not melting plastic parts in the process….unless you have a jig made to duplicate a project ya pretty much have to weld on the chassis…I noticed when you were brazing , it looked like the plastic on the sliders was starting to bubble! 😢
What a sweet doodle! Looks a bit like mine which carries the name "Zorro"
Alexander is my best friend!