Can you recommend seals for the collet closer and turret for a Conquest T42SP. I'm in the process of pulling it appart to reseal it because it wont hold pressure.
I have a parts list that I usually order before a turret rebuild. If you run coolant, you will probably need more than just seals. You will probably need new bearings and possibly both halves of the curvic coupler. Email me and I will send you a parts list and the procedure to set the backlash between the worm and ring that drives the turret rotation. Daryl
Left hand threads and bolts and someone still wanted to put locktite on it? Thanks for sharing, fluid in that piston chamber looks pretty yuk! Charles
That's why it's important to change the hydraulic oil and part of the reason the seals wore out. Thanks for the reply, as always, Charles.
Like that thank you I have a Hardinge cobra 65 I can't move the Z and X axis I'd like someone to help me with this old lathe
Can you recommend seals for the collet closer and turret for a Conquest T42SP. I'm in the process of pulling it appart to reseal it because it wont hold pressure.
I have a parts list that I usually order before a turret rebuild. If you run coolant, you will probably need more than just seals. You will probably need new bearings and possibly both halves of the curvic coupler. Email me and I will send you a parts list and the procedure to set the backlash between the worm and ring that drives the turret rotation. Daryl
I will measure the o-rings for the collet closer as well.