Instead of grinding down the lip, you could also try to replace/grind the c clip. Some aftermarket clips aren't perfectly compatible with other hop up units. I had the same issue with a plastic hop unit, where the c clip was so wide that it put forward pressure causing the hop unit to compress into the bucking.
I have a double feed problem. Could this solve a problem? The problem happens only when I install maple leaf. I have also found out, that the lips on the bucking are way wider than on the original bucking (bb just falls thru the bucking, no push is needed).
Depends on what fps its putting out. There are alot of better barrels for the maple leaf buckings, the maple leaf barrel is just that one step up from a regular barrel at a good price 😊
Your videos are really informative and helpful! Thank you
I like your method of dremeling done the lips makes allot easier then doing it by hand
you deserve more subs..
Instead of grinding down the lip, you could also try to replace/grind the c clip. Some aftermarket clips aren't perfectly compatible with other hop up units. I had the same issue with a plastic hop unit, where the c clip was so wide that it put forward pressure causing the hop unit to compress into the bucking.
please a video about compression between the bucket, the cannon and the prowin camera and how to fix it.
Happy to have people like you
The world with u is so much better keep it going
I used a maple leaf MR hop on my GBBR. It jammed up on the first ever shot, but has been fine ever since. Good shout out, tho.
You need to still be making videos! Thanks for the education
I hope you ok buddie 👍
Nice😊👍🏼
I have a double feed problem. Could this solve a problem? The problem happens only when I install maple leaf. I have also found out, that the lips on the bucking are way wider than on the original bucking (bb just falls thru the bucking, no push is needed).
Yep maple leafs are sods for it
Hey I hope your alive and doing fine haven't heard from you for a fat minute
When is thr giveaway?
Man is a great video. I have the same problem, but shortening the rubber lips did not help. Do you know any other options?
Could be your nozzle that is too long
Year later best help ever
When is the giveaway
Cool video:)
I didn’t know that that’s very cool
What degree bucking do you recommend by maple leaf
Depends, what weight bb and fps?
What degree should i use for .32 bbs on my evo. and is the 229 mm ML aeg barrel the best to use with this bucking ?
Depends on what fps its putting out.
There are alot of better barrels for the maple leaf buckings, the maple leaf barrel is just that one step up from a regular barrel at a good price 😊
Your super good at your content why don't you do it more often I'd watch
I wish I could just throw a hop up like that not care about it
Upload more video’s TH-cam getting boring