วีดีโอ

tbh cyma is just fine people complain about the quality too much like bro do you want a gun you can slam against a wall or something chill lol

That c-clip isn't milled, it's an injection part, what you are seeing is the milling marks from the mould that it is injected into.

Hu guys. Just wanted to give an update on this. I ordered a Mag 7 and used a Maxx hopup assembly with an edgi 7mm window inner barrel. I used this set up on my HK417 DMR. Using 0.43g (BLS), its noticeable improvement in groupings. Range is 60 and 70 meters.

You can talk about whats best or not but the only way to know for sure is to show us comparisons at range in shooting vids.

Instead of grinding down the lip, you could also try to replace/grind the c clip. Some aftermarket clips aren't perfectly compatible with other hop up units. I had the same issue with a plastic hop unit, where the c clip was so wide that it put forward pressure causing the hop unit to compress into the bucking.

Whats the aluminium nub you were using?

I have the CM.045A, and the mag and flash hider doesn’t wobble on mine. However, the stock is a bit loose at the pin, but I fixed it with 2 layers of black electrical tape where it meets the receiver. 70 meters of accuracy is of course a bit of a stretch for almost any airsoft gun. Also I was surprised by the trigger response, mine feels very snappy with a 9.6V NiMH battery. You probably got bad piece, or I got one that’s better than most :D

the test between these bucking never came

Thanks for the great roundup! Wow, that 2021 MR Hop seems to be the winner here; just installed one on my SSG10 with a ML Crazy Jet barrel (fits absolutely perfectly in the window) and I am really looking forward to the next time I use it.

Man upload some more videos please :/ my fav explanation airsoft channel

Ive had terrible luck getting ML buckings to work. Both a Macaron and Mr Hop cause feeding issues in both my M4s eith a couple different barrel and hop up units. Its a shame because when it actually does feed it works great.

I have one, it has been giving me a lot of issues. For example on the short Evo with m125 and 0.25g bb it outputs: CNC unit installed: 0.7~0.8 joules Stock hop-up installed: 1.3~1.4 joules

dont click your tongue its disgusting

what nub did you use on this test brother?

Great content sir.. what inner barrel, hop chamber and rubber do you recommend for the best groupings?

little late to the party i guess but the mr hop is made to work with a concarve nub not a flat one, you are basically wasting 70% of its potential surface area with the bb. at that point might as well flat hop your stock hop up system for 0 bucks

I was under the impression that if your bore is tighter you gain more fps and that pretty much it.

If you’re on a tight budget with a cheap replica like a cyma, I can see the value in doing this because I doubt the stock inner barrel is free of imperfections. Honestly though an aftermarket barrel is probably the more practical choice, I can’t imagine there is enough of a difference in accuracy to go through all this work at the ranges airsoft play happens.

6.01 for max fps, good nub and hop up bucking and you are good to go 😂

This was a great video by no means am i new to soldering but I was concerned about he dissipation and heat bothering the battery. You covered both concisely and dropped some great tips!

put the MAG5 Bucking (70°) in my SRS Sniper. Together with a prometheus barrel, I reach with .43g BBs 120m at 150psi with a spread of 30cm. Insane good bucking

useless

bought the full metal body version of this gun, threw a gate aster and a new VFC motor in it and it shoots like a dream.

Hey Reflex are you still there?...

Why not lambda 6.03?

Hey friend, who makes or where i can buy that hop up unit?

Consider keeping your hands out if the canera view - kind of disturbing as they fly around.

Wow! This is a truly professional comparison.

If bore size doesn’t matter then why do you have to change the air pressure behind it?

is the Maple Leaf SUPER Silicone still better, is it the best?

You should never use the iron itself to melt the solder to the connection. The iron should heat the contact surface enough to melt the solder. If you use the iron instead it may not have heated the surface enough to actually adhere. This is how you end up with cold solder joints. To clarify, the only time the solder should directly touch the iron is when tinning the tip to prepare for applying heat. I'm experienced in soldering, I'm just looking for ideas of how to not fry myself accidently while soldering a live power source.

you might cringe so bear in mind I'm just a dummy who know a couple things about a few topics. airsoft replicas are not my wheel house. I do know cars but also paint and reconditioning. again no pro I only know what has worked for me. I would think that spraying silicone to clean a barrel would be a stupid thing. all lube draws dirt and grit. I tr to tell people that but they refuse to listen. alcohol to clean but maybe cringe. I use a series or polish and wax that really has worked for me. nothing life or industry altering but it seems to improve grouping and the consistency. I start with a polish then move to a polymer wax. have you seen this done. it seems that I would be doing a comparable process just using different products, no? thanks for any help. I do it until my clean cotton rags are clean in and coming out.

your accent is perfect. I appreciate the info. much obliged. cheers

Would mag7 work on 1.2J?? Legal limit, but got Prometheus 7mm barrel (reccomendation is 1.3J or up) maybe someone tested already?

Great information

I am having an issue where the installed bucking doesn't hold the BB. BB just rolls right through it. What am i doing wrong?

Let’s go honest review

What is the best size of inner barrel for AR /M4 and what difference makes the lenght

What is the best for AR and acuracy ?

how about lambda L1 6.01？

Plz do not get this hop up

Hey bro, greetings to you. Im using Mr. Hop 70 deg right in my HK417 DMR. It shoots great but would like to test out the 7mm Begadi Pro 60 deg. Already have the inner barrel with a 7mm window (500mm x 6.03). Just wanted to know if this will be bstter than my current set-up or will it be worse???

Thanks bud.

my man from the lovely netherlands✊🏾 im comin over from germany 4 to 5 times a year...❤ what im wondering about is, i have 6.00 barrels on all my tm spec glock builds and cant picture the bb not touching the roof of the barrel🤔 i even have old madbull bbs from the early 2000s wich are 5.98mm...hard to grasp that thought of them having a bed of air around them traveling down the barrel.... good video tho

Do these fit zci barrels well they have a 5mm window, am I right in saying I need a fly mag 5?

Think about how much better that group would be if you used your sites.

it's had released long time ago........... but with this price it will beat "china" brand :D

Do you know if the mr hop would work fine in a stock Vfc Avalon saber?

Very helpful, thank you

Vorsk Eu18 87mm 6.03 I replaced with a lambda 97mm 6.01 & 60° Deceptercon. I lost 5-10fps but my accuracy want right up. The Deceptercon I think was the FPS loss