NEW Touchless Wash - Dirty Shop Truck Edition
ฝัง
- เผยแพร่เมื่อ 11 ก.พ. 2021
- Introducing our brand new 2-step touchless wash soaps! Non-hazmat soaps that can be shipped SAFELY & LEGALLY directly to your door with standard shipping carriers. The perfect solution for a quick maintenance wash between normal brush washes. Touchless 1 & 2 are concentrates, so a little bit goes a long way!
Main Benefits:
Neutralizes salt/grime to protect your paint job
Safe on all vehicle surfaces (Including polished aluminum/chrome)
Fast/Easy/Effective maintenance wash
Gets surfaces 80-90% clean (On par with competitors Hazmat soaps)
Works with foam cannons or foam lance systems
How To 2-Step:
(Optional Step) For extra cleaning power, pre-soak your surface with Bug Remover to help cut through extra road film.
Dilute in foam cannon - 1 part soap to 3 parts water
Apply soaps from bottom up
Foam Touchless 1 onto your surface
Foam Touchless 2 overtop of Touchless 1
High pressure rinse entire surface. Keep wand 6-12" away while maintaining a 90 degree contact angle with your surface.
Rinse thoroughly from top to bottom
What to expect from any 2-step:
Touchless/Brushless soaps, whether it's our product or a competitors, do not get your surface 100% clean. We tested a top competitor's 2-step soaps alongside ours and determined both leave about 10% road film that you can only see up close when you run your finger through it. This is expected behavior for 2-step in general. These types of products are meant to be used for maintenance washes between your normal brush/mitt wash. They are not meant to completely replace washing with a brush/mitt.
Our recommended weekly wash process:
Detailed Wash - We use our full prep/wash/protect process once per week. Start with bug remover to pre-soak bug remains and heavy road grime. Then we foam on some Platinum Wash soap and scrub the surface clean. After scrubbing, rinse thoroughly. Once the surface is 100% cleaned, we apply a coating of Invisishield (our foam on wax replacement) & rinse off.
2-Step
Between detailed washes, we use Touchless 1 & 2 to neutralize road salt/grime and help keep the surface clean and free of extra build up. - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Pacific Stage 2 - Playoffs Lower Bracket Final // PRX vs DRX](http://i.ytimg.com/vi/5HwO1bQyAx4/mqdefault.jpg)
I can't wait to use it.
Thanks Jeff! Let us know what you think once you give it a shot.
TYVM Boss 💯👀😎👍👍👍
Do you guys recommend pre washing first with plain water? Like I know this video was exaggerated, but would you usually recommend getting off as much dirt as possible before adding the soap, or is there something with the reaction that NEEDS dirt?
You know, we have never been asked this question, but it actually is an important one!
We do recommend pre-rinsing large chunks of dirt off before starting, BUT you shouldn't have to pre-rinse the entire surface. Contrary to popular belief, pre-rinsing the entire surface actually adds another barrier for the chemicals to penetrate. So, the soap has to get through the water to get to the dirt, which results in the mixture that interacts with the dirt being more watered down.
What is supposed to happen is this: You foam the step 1 on and let that sit for a minute or two, then foam the step 2 over top. The chemical reaction of the two soaps reacting actually breaks the surface tension that makes the dirt stick to your painted surface. Breaking that surface tension is what allows the pressure washer to rinse it off more easily. So you actually want the soaps to make direct contact with that dirt.
This was realistically only 1 week worth of grime from winter driving up here in Michigan. We recommend washing with touchless soaps at least once a week, but preferably twice or more per week during the winter when you need to neutralize that road salt before it corrodes.
On show trucks, we would wash them every day they come in off the road with touchless soaps.
If the vehicle hasn't been washed in longer than a week, you're probably going to want to brush it.
ONE LAST POINT: If you keep your vehicle protected with a wax coating (or something like our foam-on wax replacement), you can get good results with a touchless wash less even if it's been longer than a week.
There are a LOT of factors that go into getting good results from a touchless wash. So if you ever have questions, hit us up on social media @washproduct and we can help you out no problem. We have all sorts of solutions to issues we've run into over the years.
Sorry for the long winded response, but hopefully others find this educational as well!
Cheers!
What setting are you using for the foam cannon? The top dial where is it set at all the way zero?
Somewhere between all the way down to 0 and 50%
What is the step 2 called? I just bought yall Wax Replacement.
And do I need that in order for it to work to wash my Lexus car?
Touchless 1 (step 1) Touchless 2 (step 2). Wax Replacement is not a cleaning chemical it is a foam-on/rinse-off protectant that you should apply when your vehicle is 100% clean. Like after a brush wash, for example.
Are y’all using a hot water pressure washer? If bought in quantity, any kind of discounts?
We use cold water, however you could use these products with hot water as long as the water isn't heated beyond 130 degrees. At about 130/140 degrees, the effectiveness of soaps starts to degrade.
Yes, we offer bulk pricing that does give you a discount per gallon.
When buying as a gallon: $45/gallon
When buying as a 5 gallon: $42/gallon
When buying as a 55 gallon drum: $38.09/gallon
We also pay for $50 worth of shipping on drums. If you order 4 drums of any of our products, we cover $250 of shipping for the skid.
You can get up to 5 gallon containers of the touchless on our website. For drum orders, please call us at 616-777-7175 or email us at help@washproduct.com
How much rinse pressure are you using?
It's a 2300 PSI unit.
Im kind of skeptical on touchless washes do you sell the product on smaller quantities like 16 ounce bottles? Can you sell me a small samples?
At this time, we only offer them in gallons. However, if you use code NOTOUCH20 before the sale ends at midnight tonight, it'll only be $72 instead of $89.99. We may offer different sizes in the future.
I live in south Australia, do you have an outlet in Australia?
Not yet! But some day!
Is this even clear coat safe?
It sure is!
How much so do you put on each cannon
1 part soap to 3 parts water.
Do you use hard water?
In this video we did indeed use hard water.
Game changer yet again.. Well as u saw my post with using the Degreaser, truck wash or wash and wax soap then applying the invisishield.. on ig Njdurango_rt19 or on ig carsmatic.autodetailing I've posted before and after results.. U will need to send me this to see how this truly works.. U know I'm a true supporter of ur products.. all my customers love the results..
A lot of water man