Touchless Wash 1 & 2 Explained

Order now: touchless.washproduct.com
Introducing our brand new 2-step touchless wash soaps! Non-hazmat soaps that can be shipped SAFELY & LEGALLY directly to your door with standard shipping carriers. The perfect solution for a quick maintenance wash between normal brush washes. Touchless 1 & 2 are concentrates, so a little bit goes a long way!
Main Benefits:
Neutralizes salt/grime to protect your paint job
Safe on all vehicle surfaces (Including polished aluminum/chrome)
Fast/Easy/Effective maintenance wash
Gets surfaces 80-90% clean (On par with competitors Hazmat soaps)
Works with foam cannons or foam lance systems
How To 2-Step:
(Optional Step) For extra cleaning power, pre-soak your surface with Bug Remover to help cut through extra road film.
Dilute in foam cannon - 1 part soap to 3 parts water
Apply soaps from bottom up
Foam Touchless 1 onto your surface
Foam Touchless 2 overtop of Touchless 1
High pressure rinse entire surface. Keep wand 6-12" away while maintaining a 90 degree contact angle with your surface.
Rinse thoroughly from top to bottom
What to expect from any 2-step:
Touchless/Brushless soaps, whether it's our product or a competitors, do not get your surface 100% clean. We tested a top competitor's 2-step soaps alongside ours and determined both leave about 10% road film that you can only see up close when you run your finger through it. This is expected behavior for 2-step in general. These types of products are meant to be used for maintenance washes between your normal brush/mitt wash. They are not meant to completely replace washing with a brush/mitt.
Our recommended weekly wash process:
Detailed Wash - We use our full prep/wash/protect process once per week. Start with bug remover to pre-soak bug remains and heavy road grime. Then we foam on some Platinum Wash soap and scrub the surface clean. After scrubbing, rinse thoroughly. Once the surface is 100% cleaned, we apply a coating of Invisishield (our foam on wax replacement) & rinse off.
2-Step
Between detailed washes, we use Touchless 1 & 2 to neutralize road salt/grime and help keep the surface clean and free of extra build up.
00:00 - Intro
01:11 - Apply Chemical
03:51 - Rinsing
05:51 - Wash Conclusion & DI Rinsing
12:24 - Leaf Blower Drying
15:01 - Final Results & Explanation

[@luisreyes4294]

What do you recommend if we can’t access di water nor reverse osmosis just towel dry it? What about using this two step in the heat

[@The404169]

I have a renegade motorhome - is this safe for washing motorhome without hurting the wax job

[@NPonlamuangsri]

It’s really funny that you’re washing a truck from a company with its own truck wash 😂

[@davidcool2048]

When you need to bucket and brush do you one step then brush or how do you do it

[@ImageWashProducts]

Hey David our 2 step soap is a brushless maintenance wash soap. For brush washing you can use either our Platinum Wash or Wash & Wax. Find those here: washproduct.com/collections/all-chemicals

[@graywolf1956]

Good morning. Are you saying there is no need to use a brush, just spray and rinse ? How much $$$$$. Any samples ?

[@ImageWashProducts]

Correct! This is a touchless maintenance wash. There is high demand at the moment since we just launched the product, so no samples at this time. You can find all the information on this product at touchless.washproduct.com or feel free to reach out to us on facebook.com/washproduct. Thanks for checking us out!

[@MarkPitts-ub6gj]

After you put the 1 & 2 Steps on do you let it dwell for a minute are 2 are do you just rinse right after?

[@ImageWashProducts]

Apply step 1 (let it dwell for a minute)
Apply step 2 (let it dwell for a minute)
Rinse

[@551jerseyboy]

Did you use Hot or Cold water with your powerwasher ??? And how is it with a mobile wash in about 90* heat or is it recommended to just do the two step in sections at that point...

[@ImageWashProducts]

We always use cold unless we are doing some heavy degreasing, in which case we'd only use hot water for the rinse potion. Thanks for your question!

[@robertbell8393]

How effective would the turbo nozzle be with this set up?

[@ImageWashProducts]

We haven't tried it, but if you do, let us know how it goes. 👊

[@mike18421]

Is this safe for regular cars and pickup trucks?

[@ImageWashProducts]

Yessir! Safe on all surfaces and all vehicles.

[@fernandoban5050]

Is ionized water the same as alkaline water? What ph os ionized water at?

[@ImageWashProducts]

Hey Fernando I found this on the web that goes over this question in detail: www.kykindia.com/difference-between-alkaline-water-ionized-water/

[@dannygonzales2514]

Will this work with a cold water pressure washer?

[@ImageWashProducts]

Yes, we actually recommend applying the soaps with cold water.

[@champion4566]

How much soap do you put on a Canon for each one

[@ImageWashProducts]

1 part soap to 3 parts water.

[@mariocornejo3773]

Hi how much soap you guys put on the foam cannon?

[@ImageWashProducts]

1 part soap and 3 parts water.
So in a 40 fl oz foam cannon like ours, you'd put 10 fl oz of soap and 30 fl oz of water.

[@artemiopena3243]

Why not wash the top of truck?

[@ImageWashProducts]

Hey Artemio thanks for the comment! For sake of time we often do not show the entire detailed wash process that we do everyday in our polish and detail shop but we do indeed always make sure to get the roof. 😎👍🏽