This will 114% increase your print quality - Get TOP quality prints in under 14 minutes.
ฝัง
- เผยแพร่เมื่อ 9 มิ.ย. 2024
- In this video i will cover the basic settings in Orca Slicer.
After watching this video you are ready to rock with Orca Slicer.
Orca is in my opinion one of the best slicers out there, it is a fork of Bambu studio and is a perfect mix with Prusa Slicer, where they have taken all the best features and put it into one slicer.
You will NOT be dissapointed.
Orca just makes every print look amazing, which some of it has to do with the pre-configured print profiles.
-----------------------------------
Timestamp / Chapter:
If YOU have any questions:
info@byhesselbech.com
For business inquiries
business@byhesselbech.com
Links:
Orca Slicer official Github download page:
github.com/SoftFever/OrcaSlic...
Official Creality Sonic Pad Firmware Github page:
github.com/CrealityOfficial
Official Creality Website:
www.creality.com/
I hope this tutorial is usefull.
I will post more videos with guides, how to, knowledge and fixes and maybe some reviews of different slicer software, 3D printers & Filamanets.
If you like this type of content, feel FREE to Subscribe to get notified for future videos.
By Subscribing YOU support the work i do for YOU, THANK YOU.!
What is your thoughts of Orca slicer ? Let me know in the comments below.
See you in the next one.
Tech By Hesselbech
Motto: More Prints, Less Headaches. - วิทยาศาสตร์และเทคโนโลยี
The In-depth Orca video can be found in my playlist. 😎
Just a Note!
Have had questions about using an Ai voice (Text to Speech), i used Text to Speech because of my Daily struggle with anxiety which i had to overcome, but my latest Orca video is MY own voice, and will also be that in the future videos.
Thanks to all the people who have supported me on my journey so far ( Subscribers, Viewers, comments and so on) it means a lot. Thank You
Great, I look forward to it...
🇬🇧 This is the best introduction to Orca that I have seen. Well done. 👍👍👍👍👍
Hi, thanks for this comment as well, that really means a lot to get this type of positive comments, I’m happy that you found this video useful.
I’m working on a special edition, where I make custom profiles for my viewers. 😎
Thanks again, 👍🏻👍🏻
Your welcome and I will look forward to other clips.
Great video, Cant wait to see more. Keep up the good work!!
Thanks, that means a lot, I’m also excited to get the video uploaded, just working on the last editing.
It’s great to get so much positive feedback, 👍🏻😊
Hi Martin, thank you for this guide, it's what I searching for, Orca Slicer+Creality Ender 3 S1 pro+ Sonic Pad.😀👍
😀👍🏻 no problem, hope it helps.
@@TechByHesselbech I made it to be your 100th follower.😃👍👍👍
Anyway, your guide worked like a charm for me. Maybe I still need to check the speed and temperature because I just printed a Benchy with half the hull ruined. I hope you'll post some "advanced" guide of Orca Slicer soon.
@@FS-tq8cm thank you so much it means a lot to me, all the support given from people it’s simply amazing.
I try to give a helping hand for those who need it etc. To watch these comments just means a lot, also taking my anxiety situation taking into account. thanks again 💜😊
Thank you you totrally deserve more followers cannot believe how Orca SLicer make 3d printing with a sonic pad that good. I was using cura and creality slice but damn Orca gets out the best of Klipper. Impecable prints even at 200mms for complex parts with pla. I use a ender 3 v2 btw.
Wow thanks that means a lot. I made the video because I myself had some issues with other slicers and I was not too satisfied, I tried orca and thought everybody should have the opportunity to make awesome prints with less effort.
Orca has managed to tweak every standard profile to near perfect, which is why I would never go back to any other slicer. 😊
Thanks again for your comment and kind words.
I’m working on more videos about orca,
Thank you for this video. I am anxiously awaiting your more in-depth video on Orca. I am trying to find a better slicer for my models. I have an Ender 3 S1 with the Sonic Pad. I started with Creality slicer then moved to Cura slicer. My prints are ok but I want better. I started to experiment with Prusa slicer and have been pleased but I'm not sure where to go to change some settings to improve speed. New language, lol. I was looking for videos to help me understand Prusa better and that's when I found you. Anyway, I have downloaded Orca as some people I follow on TH-cam have mentioned Orca and how much they love it in some of their videos. Since I am not having luck finding what I want for PrusaI am giving Orca a try. This video is exactly what I am looking for. Thank You and keep up the great work. I have subscribed.
Hi. Thanks for your comment. A comment like yours is exactly why I love making How To videos and so on.
Your comment means a lot and starting my TH-cam channel is where I find strength and my way to cope my daily struggle with anxiety, and it just gives me more energy to keep posting useful and helpful videos for those who wants to watch my content.
I may fall beside the “regular” TH-cam content creator Box, but I try to keep it fun, entertaining and serious at the same time.
For every video I make, I have a mission to improve one thing in each video and this is how I keep my anxiety checkmate. 😊
Thanks for subscribing, I really appreciate what You and those who watch my videos, even if they don’t subscribe, just knowing that people find my videos useful, is the best feedback to get.
Thanks again, the in-depth video is just around the corner, and will be up soon. 😊
, Martin
Orca is significantly better than the rest.
@yeahh_idk_ i have the same thoughts about orca vs others slicers.
@@TechByHesselbech I started off using Cura and while making the switch originally was rough due to relearning things on that specific slicer, it was absolutely worth it.
@@yeahh_idk_ yeah it can take some time to learn a different layout and what the different things do and don’t.
But you are right it is worth the work.
I have 3x ender 3 v2 printers running off a sonic pad. It's a huge improvement for print speed and quality. I used orca slicer previously when the enders were stock and like it much better than cura. But this is so far the only setup instructions to mate the 2.
1 question, how do we ensure the sonic pad is in control of speeds and not orca. You made note to do it, but not the how. Do we just 0 the speeds in orca?
Hi, and thanks for your comment, yeah it is a huge improvement with the Sonic Pad.
Orca does the same as Cura when it comes to the Sonic Pad, instead of adding a specific printer, you just add a klipper controlled device, and then set your bed size and so on, in Orca you do the same to uncheck Orca to control acceleration and so on. 😊
But I will cover this in the in depth video.
Let me know if you have further questions. 😊
You only using one sonic pad for the three printers?
@benrojas5444 actually the sonic pad runs 4 printers now
@@TurboChicken313 yeah i was lookin at the updates for it, gonna have to get me one
I have a dedicated laptop that I have created a virtual raspberry pi on and installed klipper, I am trying to figure out if I can send files from my laptop to this virtual machine on the other laptop?
Hi, thanks for your question.
To receive files on a virtual “drive” you need to give and have access to its ip address or make a shared drive to be able to receive and send to it.
With some work you should be able to make a connection between the two, you need to dedicate an ip address on your virtual “machine” raspberry pi, and then make a shared folder/drive.
Let me know if you have further questions and I will see if I can help you further 😊
A fantastic video, it will help me, above all, to speed up my impressions from Orca Slicer, I can't wait to try it. Please, could you put your start and end G-Code? I also have an Ender 3 S1-Pro :)
Thanks Rafa, this means a lot more than you know, ofc I can. I will sent it to you. 😊
@@TechByHesselbechCould you put it here? So other users could also have access to this configuration :)
I’m working in a Solid Profile to post in my next video, which I’m working on at the moment. 😊
@@TechByHesselbech Ah, perfect! I'll look forward to it :)))
Great video, and I was excited to find it since I just downloaded Orca. However, this version of Orcas keeps crashing my Win10 desktop. The last version never crashed. I feel like something has changed in a not-so-good way.
Hi, thanks for your comment. I haven’t heard anything about people crashing.
Have you tried to update your graphics card drivers.?
This could be the reason why is crashes.
@@TechByHesselbech - Thanks. You know, I haven't had to upgrade (or tried I should say) my video card drivers in years. I suppose Windows is doing a decent job of it since I do a lot of multimedia processing on this particular desktop. I have been running quite a few different slicers the last couple months trying to learn my S1 Pro with SP a little better, and haven't experienced any problems until this version. And, it doesn't lock up until I go into printer settings and then try to save them. It just stops responding. Oh well, I can revert back a version, no problem. Thanks again for the video, and the suggestion.
@@pearltiger2003 thanks again, I hope you find the reason to the unexpected shutdown of the slicer. I’m using windows 11, for my part I haven’t had any issues yet.
You could also try to reinstall orca to see if that helps, normally a sudden shutdown or crash is 90% of the times driver related.
It's Batman teaching us to use ORCA?
😀 that was actually funny. The next video it will be my own face and voice. I’m struggling with anxiety therefore I have been using voice overs. Text to speech 😊
Been running Klipper on my Ender 3 S1 pro. I hooked up Sonic pad to Orca and have not looked back. Cura is asleep for now.
Hi thanks for your comment. 😊💯 yeah Orca just prints different, they have made very nice tweaks to each profiles.
Thank you for the video. One question. If my sonic pad handles the speed, what should I put in the speed section of orca so that my sonic pad speeds are used?
Hi Kathy, thanks You for watching my videos and for your question.
If you want to be sure not to have Orca controlling your print speeds, you should set all the speeds to 0 in the print settings. Orca knows your firmware because you choose klipper in the G-Code flavor settings.
If you want , you can type in the settings from your print.cfg file, which shows your different speed test numbers, like Max acceleration and so on. 😊
Hope it all made sense, if not then just let me know and I will do my best to help you. 😊
@@TechByHesselbech fantastic! Thank you! I've done all the speed settings and input shaping on the sonic pad. I want to make sure I don't undo any of that in the slicer. I appreciate the help and quick response!
@kathynew5538 Great, then you should be good to go.
Just a tip:
I recommend you do temp tower, retraction and accelerations test on every filament you have, because not 2 filaments are the same, even if they are the same color.
Then you will get the best results from your printer.
Do you have input shaping set up with Orca since your using the sonic pad?
I have not set any input shaping directly in Orca, The Sonic Pad should do the controls itself, and use the build in input shaper.
Good afternoon can you help me with orca slicer jerk speed settings. I'm use printer ender 3 v3 se printer and trying to use orca slicer
Hi, and thanks for your question. 😊 what do you want to know about out the jerk settings.? 😊
@@TechByHesselbech
How can I use orca slicer with ender3 v3 se, when choose a print and start to slice it to make it to gcode, then it says that the jerk speed exceeds the printer's speed, what can I do to fix this???can you please help?? Thank you
@@peterstoltz3296 Hi, try to set your jerk settings/speed to 0 , normally I would suggest to disable jerk settings.
What is your print speed settings.? And what is the jerk speed settings set to.?
Can i connect flashforge adventurer 4 or guider 3 with this orca? I dont see any profile for these printers :/
Hi , yes you can use almost any printer with Orca depending on your firmware but anything is possible, the pre configured printers you can choose in Orca is printers they added as pre-made profiles, but you can add and configure a printer in Orca for you specific needs.
If you are running for example Marlin firmware, you just check that in the setup menu, and then you just add your Bed size and so on.
Then you can find reference Start and end g-codes matching your printer, and then you are good to go.
What firmware do you use ?
Let me know if you want me to make a video about adding a non shown printer in Orca.
@@TechByHesselbech thx for respond. just regular firmware for both.
@@Medivh78 hi, ok then you just make a custom printer profile in Orca,
The “only” thing the slicer does is to make a file which is based on “simple” codes / movements.
The start and end g-code is just for the slicer to know your coordinates of your printers bed.
So it should be pretty straightforward.
Let me know if you need any help setting Orca up for your printer.
Nothing but issues with missing layers etc in cura causing a lot of failed prints. Made the switch to orca and only problem is I didn’t do it sooner.
I had the exact same feeling. 😊 👍🏻💯
Sir,...This is 3d printing, not mordor. we don't need a quest.
Does it supports the Neptune 4 pro?
Hi, yes Orca does have a supported print profile for your Neptune 4 Pro. 😊
@@TechByHesselbech thx👍
@@mcst6969 no problem, 👍🏻😊
Does it supports the Neptune4max?
@@Rustam-uc6zw hi, at the moment, they have not released any pre made print profiles for the neptune4max, but the neptune3max is there. It is possible to make a custom print profile and insert the printers bed size and preferred start and end g-code and so on, and you could take some of the information from the neptune3max profile and tailor it to fit your neptune4max. 👍🏻
how about do a custom printer, its too easy for pre configured printers
Hi and thanks for your question 😎
The custom profiles is actually pretty straightforward, I can make a video on making a custom profile if you want to see how.?
@@TechByHesselbech Absolutely would like u to do that. I have a large size reprap printer built from a kit. I replaced almost everything over the years. It is now run by a duet2 wifi board. Have mostly used S3D slicer, Prusa and Cura also work.
jerk speed is 8.00 and printer speed is 180 all stock numbers, sorry for late response
ender3 s1 pro bed size is 220x 220
Hi and and thanks for your comment.
But the actual bed size is 235x235 if you measure it. But the reason why you only use 220x220 is because it needs some free space around the bed because the printhead can only use 220x220, but some slicers needs the actual bed size of 235x235, while others only needs the printable bed size.
Sounds like the ‘how its made’ voice 😂
That must be a compliment I guess. 😊
orcaslicer+klipper makes your printer a F16 fighter jet
Hi, yeah they have done an amazing job tweaking Orca slicer and adding the Sonic Pad just makes it Fly. 👍🏻😎
Not clear from the video where the +114% comes from.
Hi Harry, thanks for your comment, it’s actually just meant as a visual aspect of Orca Vs Cura in quality and performance in general.
PrusaSlicer is better than both
What do you think makes Prusa slicer better than Orca or Cura ? 😊
In my opinion Super slicer and Orca Slicer are better than Prusa Slicer, since both are based off Prusa Slicer with added stuff.
@@RoasterOven that is also my experience, Orca is a fork of Prusa, but it seems like they have made some great tweaks.
Orca slicer is just a fantastic Slicer from the get go.
Thanks for sharing your experience and opinion. 😎
I can get perfect prints on my KP3S Pro after setting up Orca and tuning it. But holy hell, no matter what I do I can’t even get a good first layer out of Orca for this exact setup of Ender 3/SonicPad. I get perfect prints out of it using Prusa Slicer.
The voice profile is just really creepy.. Distractingly Odd..
Edit* by the 2:50 mark, I just couldn’t take anymore.. I tried but the voice is just far too Irritating.(putting it kindly)..
Probably some good information though..Any chance for another upload with another Voice?..(Faster cadence, less Over-enunciations and leave the eq alone!.. Sounds like someone boosted the Highs, dropped the mids and Eq’d it incorrectly..
Hi and thanks for your feedback. 😊
I’m glad you find the video informative, I will do a “remake” with my own voice for this video, I have just been struggling with anxiety for 10 years, so in the beginning I had to overcome this part, but I will make for sure make remake.
Thanks again for your feedback, 😎
Promo'SM 😑
Ok.?
Sad that a generated voice was used, else it would even deserve an upvote
Hi thanks for your comment, the voice in the video is used by text to speech which is me typing everything and it converts it to speech. But my latest video of Orca is my voice. The reason why I started to use text to speech is because of my daily struggle with anxiety which I had to overcome. But thank you for the comment. 😊
@@TechByHesselbech have watched the latest video already and gave an upvote because it was well made! thanks for your content :D
@@crckdns hi, to start of with, Thanks for your comment, and your messages means more than you know.
I really work hard especially with my anxiety but I’m beginning to overcome this, therefore I really appreciate you and your comment, it means the world to me. 💯👍🏻😊
at least have the decency of using your own voice!
Please read my bio, then you will have the answer, why it is like it is at the moment.
But thanks for your comment it means a lot.