Soldering??? TiG is best weld for aluminum As for sitting in liquid it helps prevent warping during weld process . As for this guy welding not so good of a welder
kebetulan saya pakai mesin yg sama om.. yg saya belum faham fungsinya background Ampere itu apa yaa om ?? saya masih bingung sama setingannya.. maklum pemula ndak ada yg ngajari om 😁
you need to be around 200 + amps with a foot pedal to control around edges and hammer the weld deposit to stress relieve pre heat to 250 c i see no purpose with the water
Proper maintainence would have saved that cyl. head , people are so damn lazy and have no time for it. UNTIL the engine takes a dump. I highly doubt that was a one of a kind or rare cyl. head, trash it and get a used one from a junkyard.
You got it going again, pal. Without having to find and buy another head. Good job.
You warm up while soldering will be better. Dipped in water, the hot and cold expansion is too strong, not very good.
Soldering??? TiG is best weld for aluminum As for sitting in liquid it helps prevent warping during weld process . As for this guy welding not so good of a welder
the use of water with ethylene-glycol is perfect and suitable for large pieces
Itu alat las nya pakai apa bro?
very useful way👍
Looks like used wrong gaskets for aluminum or wrong antifreeze
Это ребята последствие левого антифриза.Надо жестоко наказывать продавцов.
Mantab kang....👍👍👍
Se ve muy bien y es el mini coloso el Suzuki Jimy samurai 😊👌👍
Maaf mas itu setelah pengelasan apa ga molet melintir
Interesting
The damage is from water port to another water port. 😮
Mantap cara las dekselnya hadir nyimak dan sukses selalu buat sahabat
Amiin makasih
Mantap bosgu
kok sptnya ga berpengaruhbya..kan permukaanya tdk terendam
Молодец! Мы в России так же делаем.
А что за жидкость и для чего она?
@@МаксимБрикман Что бы не повело голову,то есть местный нагрев от сварки ,а не всю.Что за жидкость мы не узнаем.
Brpa wat listrik yg dpakai bos q
Yang saya gunakan 5500wat
Great !
Great work with the tig welder. Why the color of water is green?
that's the color of the cooling water from the radiator fluid which is sold here a lot
@@KATEKNIK001 Coolant not purely water
What's the green stuff?
radiator coolant only
Why did you heat up the head and then dunk it into water
That's just part of cleaning the remaining dirt to make it easier to peel off
Saya menyukai video anda
Ngopi mampir saudarakuh
kebetulan saya pakai mesin yg sama om.. yg saya belum faham fungsinya background Ampere itu apa yaa om ?? saya masih bingung sama setingannya.. maklum pemula ndak ada yg ngajari om 😁
Intinya buat Pelindung gas pada media las
Véi! Que exagero... não precisa nem resfriar nada. É só não demorar muito no tempo de soldagem e uma Aguinha só já resolve. Valeu!
а что это за жидкость вы туда налили ?
похоже антифриз что бы головку не повело от температуры
Lokasi bengkel mana bos
Grobogan Jateng bosku
@@KATEKNIK001 saya punya silenderhead l300 bagian seting kelep bolong bos masih bisa kah diperbaiki
Cylinder head retak didalam bahannya besi bisa dilas. ngga
Kurang tau,bagian mana yang retak jadi gk bisa mutuskan saya
@@KATEKNIK001 didalmndaerah bosch klepnya
@@KATEKNIK001 workshopnya lokasi dimana kank
pake pakan seri apa bang
er 5356
@@KATEKNIK001 posisi bengkel mu dimana
Di rumah bosku,posisi lg di Jawa sekarang bos
saya nyoba ngelas pake mesin rhino ac dc tp kok pakan lari terus gk mau nempel ya
permukaan dh dbrsihkan masi aja gosong
Desculpe …mal soldado !! Trabalho com TIG a 39 anos …processo está correto..porém a solda não está de acordo!!
Talvez você possa dar conselhos, para que eu possa ser melhor nessa soldagem
How many amp are u setting on machine?
90-100amp range
you need to be around 200 + amps
with a foot pedal to control around edges and hammer the weld deposit to stress relieve
pre heat to 250 c
i see no purpose with the water
لماذا التبريد مهم ؟
في الواقع ليس مهمًا جدًا ، بسبب طلب المستهلك ، أنا فقط أتبعه
Зачем охлаждающая жидкость?
Что бы не повело при сварке. Равномерное охлаждение.
@@evgenyvladimirovich3578 может, чтобы не повело направляющие клапанов, посадку под распредвал.
Para que se sumerge en el líquido refrigerante????
de acordo com a solicitação do proprietário da mercadoria, e os números para que não dobre quando exposto ao calor
Agua con etilenglicol... para prevenir expansión por calor. (Es basicamente refrigerante de radiador).
😉☺️😎👍👍
thankyou friend👍👍👍
Tf is he doing
minta nomer wa kang
Tinggalkan nomernya nanti saya wa kang
Throw it away and buy a new one.
Waste of time and money
Proper maintainence would have saved that cyl. head , people are so damn lazy and have no time for it. UNTIL the engine takes a dump. I highly doubt that was a one of a kind or rare cyl. head, trash it and get a used one from a junkyard.
I have the same problem but on a jeep 3.6 pentastar