ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2024
- Get your Ender 3 Neo here: vector3d.co.uk/6f79 [affiliate]
Pre-order ElectriPi: vector3d.co.uk/product/electr...
Want to install klipper firmware on your 3D printer like Ender 3, CR-6, CR-10? This guide shows various methods for how to upgrade to klipper on any Ender 3 or other 3d printer for high performance. These methods will also work with most othe 3D printers like Anycubic Kobra, vyper and kobra go, FLsun super racer, Artillery Genius and SW-X2, ender 5 pro, cr10 and many others.
The ender 3 neo was provided by creality to me for free to make this video.
Important Links
Klipper: www.klipper3d.org/
Mainsail: docs.mainsail.xyz/
Fluidd: docs.fluidd.xyz/
KIAUH: github.com/th33xitus/kiauh
Raspberry Pi Imager (OS): www.raspberrypi.com/software/
WinSCP: winscp.net/eng/index.php
Advanced IP Scanner: www.advanced-ip-scanner.com/
Get your Ender 3 Neo here: vector3d.co.uk/6f79 [affiliate]
Note: Affiliate links tell the shop that I sent you. If you purchase, it costs you nothing extra, but I get a small cut from the seller which helps support the channel and allows me to take time to make great videos for you to watch.
Buy my designs: vector3d.shop
Support me Via Patreon: / vector3d
Chat on Twitter: @Adam_V3D
Join the Vector 3D Discord: / discord
0:00 Upgrade to Klipper on any Ender 3
2:14 Step 1 - Klipper, Moonraker & UI on Pi
9:30 Step 2 - Getting Started with Printer.cfg configuration file
13:33 Step 3 - Pi to control board connection. Hardware and software.
20:02 Step 4 - Completing and troubleshooting printer.cfg configuration
26:10 Step 5 - Tips and tricks for klipper, fluidd and mainsail
27:36 Step 6 - How to update Klipper
28:20 Step 7 - Subscribe & links below - วิทยาศาสตร์และเทคโนโลยี
If you're mainly concerned about getting hold of a raspberry pi, get subscribed because I have a good potential solution that were going to try out!
An orange pi perhaps, or the one that comes with a duck? Guess I will see.
i followed your tutorial I'm running klipper on pc
@@paulmilne3038 wi'll this method still work with an orange pi?
Can yous share the ender 3 neo config file?
Thanks so much for this video - extremely information dense, and very high SNR! Great you cover multiple methods & mainboard configs, too.
Was getting ready for a new printer, but feel I got that "for free" (no new HW, just a few hours invested) just by getting Klipper (and tuning a bit). Faster *and* much better prints now.
This is the best video on the subject that ties it all together. I had spent many hours on other bits and piece of older videos without success. Once I found this video, I restarted the complete install from the start and ended with a functioning Klipper for my CR10S Pro V2 in very short time. Thank you!
Thanks for the great, very comprehensive video, Adam. Well done and very informative.
Nicely Done! 👍
I've got a parts order from BTT arriving Friday...so this comes in handy...great timing!
Damn that's a complicated process but bravo for explaining it so clearly! I'd like to upgrade my CR10S so that I can use input shaping at some time in the near future.
I watched this, then I laid down for a bit to allow my brain to cool off. Possibly the FINEST tutorial of a complex system that I have ever watched. BRAVO, Thank you, and Get yourself an extra piece of pie!
I've been having issues with my Ender 3 not moving slowly enough for wire EDM. Wanted to convert it to klipper. This video is perfect! Thanks!
KUDOS! I now have klipper running on my ender 3 pro! you have the most complete video on doing this. I was literaly banging my head against the wall and was aout ready to give up on klipper
I can't get my ender flashed on that 32 bit board
thanks for an excellent step by step guide, just migrated my ender3 - 2018 to klipper and mainsail, didn't use a pi but an HP Thinclient T520, first print ongoing.
With the Creality 4.2.2 board? I ask you because I'm having problems with it right now. I'm using the configuration provided by the video (using the Ender3v2 configuration) for the Ender 3 with 4.2.2, but it doesn't work. My Ender 3 freezes with the blue screen on. I tried using the configuration provided by GitHub, but it gives me a .elf.hex file that the printer doesn't even recognize. I'm also using a laptop
Thanks so much I got Klipper running super quick
omg thank you so much idk why your tutorial worked for me but after many tries with using an old PC running linux I got it to work. Thanks!!
This tutorial is a must. Brilliant rhythm, almost a speed run, but that's what the pause button is for. Currently I am on Sonic Pad + Ender 3 S1. Went the lazy way, I must confess. I can't stress this enough, Klipper is the best upgrade one can make on a stock 3d printer.
Klipper vs direct drive you still chose Klipper first?
@@hd-be7diI'm kinda sure that you can use a direct drive and klipper at the same time, yet, I might argue, changing the Bowden to a direct drive it's a change, not a upgrade, klipper is, in it's messy way, an upgrade
@@ReinaldoJ_AF Bowden is garbage. I'd rather have Marlin with direct drive than Klipper with bowden.
Man you are awesome. Had to watch this twice just to keep up. Fantastic content. Have an Ender s1 that is sitting idle and going to Order all these components give it a go Thank you.
Thank you! About to try Klipper on my new Ender 3 V2 Neo, will follow your instructions. I have an 8 GB Pi that I bought a few years ago that I'll dedicate to printing. Thanks again!
hello, how did it go if I may ask? I am about to try and use Klipper on my V2 Neo as well
@@zuschauer955 Actually never got around to it; gave that printer to my nephew. Got a Creality KI now, just using it stock, it's going great. Good luck to you!
@@kennethbeal Thanks for replying :) It was a bit of a headache but I managed to set up Klipper and have yet to configure some bits, but it's going in the right direction :D
Matey.. LOVE YA WORK!! Had no idea whatsoever about Klipper until your vid. Cheers big ears 😀
This was great!
One note though is that the early 1.1.3 boars and similar needs to have a bootloader installed before trying to flash Klipper firmware :)
Thanks! Not without nearly 100 opened chrome tabs but I've managed to install klipper with raspberry within 1 day
I appreciate the video as I am considering doing this to a bunch of Creality Machines. I will say, I have a hard time following this, and some sort of flow chart outlining the steps and the software used would help. Also, could you give me an opinion on how I would also connect this machine or several machines (running Klipper) to Octofarm on the Same Rasperri Board?
ty for the good explenation of all the boords , i brickt my 1.1.3 board ( flasht a bootloader without a arduino ) bad idea when there are almoste only arduino video;s on yt.
u have the best explenation on how to install everything, Big Thank U for your knowlage.
FANTASTIC Video!
Great video best one I have seen so far, any chance you have .cfg for a ender 3 max neo?
Great tutorial. I had trouble getting klipper to flash on my ender 3 pro with 4.2.2 board (blue screen, which is okay but I couldn't get the MCU id). After I did the following it seemed to work (3 commands):
cd ~/klipper/
make menuconfig
sudo service klipper stop
make flash
sudo service klipper start
sudo usermod -a -G tty pi
Found this on Klippers website about building the micro controller code. Using a different usb cord also seemed to be necessary. Hopefully this is helpful for someone else too :)
trieed it but still doesn't work, maybe it is because i'm in ubuntu, but i also have the same printer
@@TheThouZands try a high quality cable. Try like 4 or 5 before you rule it out, that prevented me before this iirc
@@iamsmashy had seen that problem, but i tried 6 and none worked, figured out it was a problem with the OS, there are solutions directly for debian but not for Ubuntu, and i just installed linux only for printing, so i dont know shit about it as to translate the solution, so right now im installing debian lmfaoo
nice video! thanks!
Looks like a good option to get more out of the printer but that is a lot that can be stuffed up in that setup
For the price of a Pi today, I'd upgrade the board to a Manta M4P + CB1 to run klipper. Probably cost you half as much of a Pi.
I’d love to see a guide on that, sounds interesting for sure!
I can recommend Rock CM with manta m4p, it is a bit more painfull to get klipper installed as it requires more certificates, but once you got that figured out rest is a breeze. Also it is in stock, so no overpriced scammers/no stock issues.
ME as well, this seems like a step up from the above video. @@TheExtremeElementz
What about the rpi zero 2 w
It's reasonably cheap.
@@cryptorialI know, that's what I did and it works, there's even a Nero 3d video on it
Does this tutorial also works for Enders 3 S1 Pro?
Thank you for this guide it definitely helped although the switching between methods/boards did cause some confusion, I would suggest creating a separate guide for mainsail and fluidd with all the boards.
Also FYI there are a few errors on this guide for the SKR E3 v2.
You cannot upload klipper via usb onto the board, it must be done via SD card and the .bin name must be firmware.bin, not klipper.bin
Everything I did in this guide I did complete on the boards so it's all possible as shown unless they have updated it and removed that function but that seems unlikely.
@@Vector3DP If you read the documentation at the top of the E3 V2 printer.cfg (18:05) it has it noted and it did not work for me yesterday until i renamed it
I haven't had a time to peak yet, but I'd assume the ender 3 neo MAX uses the 4.2.2 board, reckon it's still worth a watch anyway.
Another great video, is a macro tutorial on your list?
Thanks
Ye, I'd like to do this too. Macros are epic.
At this point everything he's saying seems like common sense I just like this dude😅
I have the same Ender 3 neo with the 4.2.2 main board, I had an issue with the probe not working and saying “failed to verify sensor state”. How I fix it was instead of using the bed_mesh, safe_z_home, and bltouch sections from the ender 3 s1 config I used those sections from the neo v2 config. Still swapping Probe_in and probe_out .
one of the best tutoral i've seen. I do already have klipper installed on a pi, but never got round to actuality use it. I have a Anet a8 plus running with ramps 1.6 and Marlin 2.x. But an 8bit ender3 and anet a8 plus are very similar, so maybe not too much work to alter confiq to work from this tutorial. Is it possible to run klipper in a local network rather wifi ? I work at a Highschool and we a not allowed to use wifi or any remote control. Which is the reason for me abandoning the project.
Will this work for the s1 Plus?? It seems like I can barely find any info on things for that specific model
Thanks!
If you have problems with Mainsail and Ender where you can get the mcu but the the Mainsail os doesnt connect to printer (printer is not ready the klippy host software is attempting to connect. please retry in a few moments.), try usin command "make clean" when making firmware. I had made typo to config before and only this fixed it
You got to be kidding me. I legit just did this 2 days ago and had a hard time figuring it out. Should’ve waited till this video came out.🤦♂️
Haha, sorry about that! 😅 Remember to share it with others that might need it so they don't go through the same struggles you did! 😊
Hi, when I do the command "make" it reports that a "klipper.elf.bin" has been created but it doesnt show the next step where I can choose the flashing method. I'm running raspbian in a laptop and have a 1.1.3 board. Thanks.
so when is the ElectriPi suppose to be released
Is it a problem using the 64 bit version of mainsail on a 1GB rpi4? Should I be using the 32 bit version?
1.7.5 of the pi imager no longer has 3D printing option. 1.7.4 still does.
FYI, when you suggest to NOT install the macros, this results in the mainsail.cfg file being missing. If you run through the install again in KIAUH then the only prompt is to install the macros. Doing so will add the mainsail.cfg file. I saw some comments below about a missing fluidd.cfg and thought perhaps there was something similar happening on the fluidd side. Hope this helps someone.
I have a Anycubic Kobra Max at work for some prototyping. And I’m thinking of adding Klipper into it. A Raspberry 4 in Germany is about 80-100€. A Creality Sonic Pad with Display and acceleration sensor is 120€. Is it worth to play around with the Raspberry if I can get something already being ready ? Is there anything better with the Raspi solution ?
Edit: I hope that you are resting well and that your recovery and recuperation are fantastic. Sending best wishes and positve vibes to you - Get well soon. All the best to you and your family!
One of the best 3d printer firmwares available. Your loss.
@@Vector3DP Can I offer a suggestion? Find a way to show the section on editing the cfg file in a more user-friendly way. Your video is daunting and possibly intimidating to any users who are not familiar with Linux (which I work with daily, so this is no big deal). Configuring the firmware isn't the issue, but your process could be streamlined a little better with less back-and-forth editing.
Thank You Sir
When adding the board alias for the LCD display, you copied the alias from board 4.2.7. not board 4.2.2. When I changed the bltouch pins to match the alias and couldn't get the bltouch to a closed state. I found the LCD display config without the alias and the bltouch sensor worked correctly. Everything else was spot on, thank you for this video. Keep up the good work.
Hey, can you help me with this one ? Did you find a Pin-config for the 4.2.2 ? my display does not want to work :D
Very nice and concise tutorial. A bit window-centric. No wonder, most people use Windows. But I guess Linux users would be able to figure this out by watching this video and adapting tools used.
If you can use Linux, you can probably do this in your sleep 👍
If you're running Linux, i guess you could minus the pi, if the computer isn't going anywhere
@@travistucker7317 Is what I did, no Pi stuff, I just installed klipper/moonraker/mainsail in ubuntu and i'm controlling the printer and that machine from my windows pc. I did this just because I had a spare pc so buying a pi didn't make sense in my case.
what am i suposed to do at 17:20 flash the printer? i can´t use that command
Absolutely brilliant tutorial. I am having trouble getting everything to download and install properly. Keep getting things like cloning klipper from xxxxxxxx failed and file fetched corrupt. seems like everywhere I turn something is not working and I cannot continue. Please Help!!
When is the ElectriPi scheduled to be released? Even 10 months later, I see it is still in pre-order on your website.
Is it possible for you to make the Klipper ender 3 neo config file that you created in this video available to download?
I think a better focus of this video title/intro would definitely have been more on the reliability of Kipper for the Ender 3 series, than on performance printing. Creality's version of Marlin is a mess internally, so flashing anything like stock Marlin or Klipper brings a huge improvement to bug squashing. Nonetheless, a good guide 😃
That's true of most budget bed singers I think, very buggy modifications. I just think performance is more relatable to more people. Maybe..🤔
@@Vector3DP It's not just performance but quality at performance. Unless you're running the stock firmware without input shaping and pressure advance miserably slow, the quality is abysmal. Ringo all over and bulging corners and seams. Klipper lets you get perfect quality at same speed or nearly perfect a ton faster.
Which Rasberry Pi would work?@@Vector3DP
Please could you do a klipper video for the pi5 with ender 3 v3 se
I was debating if I want to return my Sonic pad and use my Pi 3 B+. I can do all this but I don't want to. 🤣 The process is more than I thought. Sonic Pad is so much easier.
In Ubuntu 22.04 there's no link for /dev/serial/by-id/, in this case you should put /dev/ttyUSBx (where X is your USB port), anyway thanks a lot for this wonderful tutorial! I was finally able to use Klipper on my Ender3 v2 using an old laptop that lies full of dust!
great video. the only problem i have is getting my printer to take the klipper.bin file
is there a way to get the mainsail image without the pi imager because my pi imager refuses to download but I have gotten other imagers to work so id need to get it elsewhere
Is compatible with an raspberry pi 1 b?
I am working on an Ender 3 Pro that I have modded to the 4.2.7 silent board, V2 interface, a sprite upgrade direct drive extruder and a CR touch. Is the process the same as for the 4.2.2 board?
Ok, I discovered that the screen won't work with Klipper. However, I am unable to get the web interface to do anything to the printer after following the video. Any advice on that?
Edit: It will heat up the hot end and the bed, but I can't get the stepper motors to work.
Edit 2: I had the wrong pinout since I followed the video exactly. I got the pin out for the 4.2.7 and now it works.
sadly the 4.2.2 ender no longer works. been trying since december 14 - no luck yet. thought i would check here last time before marketplace - video info good here thanks
Can this be done with a Mac?
My problem is my ip adress with telstra in AU keeps changing. Even when I've purchased a ip adress from AU it keeps changing every couple of days.
Great tutorial 👌 very informative.
I'm just letting people know out there the difference between ip adress as this can be a night mare.
Set it all up and in a couple of days loose everything.
These are internal ip addresses, they are under your control, not your isp.
ls dev/serial/by-id/*
ls: cannot access '/dev/serial/by-id/*': No such file or directory.
how do i access to klipper interface from 8:58 i am usigng a orange pi debian bulseye server dist already install but how could access to th main page of fluin or mainsail nterface
for some reason the fluid.cfg has become read only.
and i cant get rid of the moonraker error now.
any solution for this?
Well, i tried installing Mainsail, I tried Fluidd, but whatever i try when i get to the cd ~/Klipper/ i always comes up with a directory not found. Looking for solutions on internet and forums left me even more clueless. Any chance someone has a solution here. I bet it's a simple one. Like when octoprint didn't want to run due to using the wrong power supply.
Hello, I am tryin to install Klipper via Mainsail. I am having issues and am stuck around 17:23. The firmaware we generate goes into an sd card and that card goes to the printer directly or does it go into the raspberry pi's card? I did it and my printer doesnt read anything
My CR Touch sends a !! BLTouch failed to verify sensor state
I've been following the steps to a T, and did some research, I came across "pin_up_touch_mode_reports_triggered: False", which starts to home the Z axis. however my cr touch for my neo doesn't trigger and the z axis just bottoms out on the plate and the motor starts going nuts. Any ideas?
To anyone with this issue, it was changing the pins in the bltouch section, leave it as is from the printer configuration without the aliases, fixed my issue.
Just as a quick note, even 9 months ago when this video was released, the Raspberry Pi Installer will not set raspberry as a default password, you need to sepcify one, and you for security would be advisable not to use raspberry.
Apart from that, this is a great video and has helped me to get started :)
Just two questions here: What is the best way to setup Klipper to and Octoprint on the same Raspberry Pi? I have a Raspberry Pi 3B+ that should handle it.
2. I currently have been using Octodash to provide a touch interface at the printer with a 7" Raspberry Pi Touch screen. Is there something similar available to interface with Klipper?
it does set raspberry as the password. Thats exactly what i did in the video and thats the password it used.
I'm having issues installing the firmware to my BTT SKR mini E3 V2.0. The settings change since you recorded the video:
- it asks me whether I should make flash or stm32flash, which it doesnt say in yours
- board number for the v2 seems to have changed from 21 to 23
- as far as I know and as far as printer.cfg info at the top says, I should put the klipper.bin file on an SD card instead of flashing to the MCU from USB, as that is not possible on this specific board.
I'm having the same issues, did you manage to resolve your issues?
any update on this? I stuck on the same issue and have info that flashing failed due to "unable to connect to MCU"...
do i have to chnage anything if i have a sprite extruder pro? (ender 3 v2 V4.2.2)
Great tutorial! I hope you talk about calibrate e-step, and find the proper rotation distance on Ender 3 on future tutorials. I'm having a hard time trying to tune this.
sorry, how are you getting 24 volts from the ender3 PSU to the pi? Did you clip the wires or something cause mine doesn't have those bootlace connectors on the end
For this demo I ran the pi all external. Adding a couple of wires to the existing psu should be pretty simple. I've done it on the ender 3 v2 for adding lighting.
When i try to enable display i got this error. pin PC6 is an alias for EXP1_1. I got ender 3 v2 with 4.2.2 motherboard. Thanks for help
I also got this. Any fixes?
Where in Europe to buy the converter u used and put on the raspberry
Just from my shop in the UK.
I have an old pie. The 1st one will that work
heplt me so much cause theres no other tutorial for the ender 3 nneo
While working on the display i got an 'Invalid pin alias 'PC6 .... Any fixes for this? Thanks
any idea if a well tuned and modded normal ender 3 v4.2.7 can do 200+m/s printing without losing much detail
did you ever do it?
Configuring with two different packages across three different control boards was confusing.
hi i have ender3 with 4.2.2. but not have auto bed, where find settings?
should I delete the .bin file? connected once to mcu now won't connect device id is correct
Klipper documentation recommends using OctoPi, so it seems mainsail OS is outdated?
Other way around. Octopi is old, mainsail is new.
@@Vector3DP ok, then klipper website needs to be updated since they mention octopi installation there... ^^
can we do this with out ElectriPi
Yes, you'll just need a 5V power source for the pi.
I am getting error like "Bl touch failed to verify sensor state"
I am using CR touch ender 3 pro.
can you provide printer.cfg file?
Hello, I realy need some help.
I'm trying to install Klipper on a SKR E3 Turbo but I'm getting always the same error "SD Card Flash Error: Unable to connect to MCU". I tryed the GPIO pin !PA14 and i got an error thtat it couldn't creat the klipper.bin file.
Now i'm using the pins: !P3.26, !P3.25, !P1.18, !P1.19, !P2.13" and i'm getting the error of the MCU.
Can anyone help me on this pls.
Thanks in advance
I have v 1.1.5 board, is This board can install??
Hi. Will this work on a raspberry pi 5?
mine mainsail updates are showing invalid
hi can i install it on a ender3 max?
I do really like this guide but. Is it worth it do you really get better performance with stock hotend and extruder, if so how much quicker is it. If there is not much difference then, I’m not being cheeky, but if there is not much difference I do not see the point of going to all this hassle. So is it an improvement?
Definitely an improvement with the capability of Input shaping for higher accelerations, more advanced and faster tuning options, less buggy than modified marlin versions. Nothing says you can't upgrade the hotend too though. You also get web interface and monitoring, webcam ability etc. The list goes on. Klipper brings A LOT of features to a basic printer.
Also, long detailed guides make it seem harder than it is.
I build a Voron following your video and a couple of others and it’s sitting in the living room gathering dust, never got it to run, it could be the wiring it could be klipper but it’s beyond me, steep learning curve. Do you not also have input shaping on marlin now seemed to recall reading that somewhere. Klipper has a lot going for it I agree and like the video but unless it makes it possible to print say 50% faster I am not even going to try it, cracking video though.
To be honest I have a stock ender 3 pro with skr 3 mini and pei bed those 2 things made the best improvements
@@paulmilne3038 i am currently running 3-4x faster on ratrig with klipper than my ender. More left in it, yes learning curve can be steep
Where to I find my Rooter?
I"m on 23 minute of the video and I encountered a problem. I have ender 3 neo with stock crtouch, but for some reason when I tried to home my printer the console outputs "BLTouch failed to verify sensor state". What should i do?
After I had the same issue, I watched another setup video. The guy in that one used the Ender3 V2 Neo definition. The BLTouch section had the following pinouts:
sensor_pin: ^PB1
control_pin: PB0
I think the carat was the difference and now that it works, I’m not changing it.
Hope this helps!
I have creality 1.1.5 board. is the process same as 1.1.3 board?
found out its the same process
just cant get this to work!?! ender 3 pro w skr mini e3 v2...
hi im trying to clone from github with ssh but it asks for github credentials
I keep getting stuck when trying to flash the board. I get an error code that says the mcu isn't connected. i have tried everything, different SD cards re doing the rasp pie firmware, different cables. I don't know what is wrong and it is driving me nuts.
Check the printer.cfg. Some printers can't be flashed over a cable (in fact quite a lot can't).
I did everything. Fluid gives me a blank white screen at my IP address. When I installed Mainsail and assigned it a port, I typed my IP for fluid and added :88. Mainsail opened, but fluid is still a blank white screen.
What do I do?
Ohh. I am using CHrome. Windows Edge works
I have M8P with CB1 on a Voron. And I have Duet 2 Wifi on my old Delta anycubic. Duet wifi 2 is 170 bucks .. klipper costed me 102... With more drivers on it and better processors and the wire pins are higher quality. And I have to say, klipper programming is a lot more advanced, and user friendly. Lots of options for you available including using USB cameras, remote control etc .. My duet 2 wifi is up to date, it sometimes still have glitches, it's not as fast on CPU power as klipper... Long story short duet sucks and overpriced. Duet 3 is almost 260 bucks. If you want to tell me klipper boards are expensive then idk what you expecting.. 100 bucks for most expensive klipper board isn't expensive. Especially when it comes with 8 drivers and raspberry pie. Any one looking to upgrade, buy the klipper board you will love it. I actually thinking on trying to upgrade my old printer and see how it runs with it.
What about an Ender 2 Pro?