Just wanted to say that I appreciate you teaching others to cut the narrow gates on the runner (the sections connecting the pieces to the runner.) I've seen a lot of other youtubers say to cut further down the stems claiming it reduces stress when cutting. In my experience however cutting like that just causes more stress as most standard nippers act more like a wedge and will push the runner against the part causing the still connected nubs to bend and tear. Maybe im doing something wrong, but I too personally advice others to cut the parts out like you did as the gates are (usually) smaller and easier to cut than the thick rods of the runner. Also some advice for new builders dont fret over the stress marks too awful much. Even if you do everything right your bound to end up with at least one and its nothing you cant fix with some plastic cement.
Really nice video. I recently started and my first build was hguc Zeta with only a rusted double blade nipper and a paper cutter. The nub marks were obvious and cutting with a paper cutter made more marks. The stickers were a disaster. Bought about 10 different grit sandpapers and a hobby knife for the second build (hguc Unicorn Banshee Norn) and OMG the difference. Wish I watched these videos sooner. Thank you
Thank you! Removing the nub marks properly it's always the first step for having a nice looking kit, I'm glad you found the video useful and welcome to the hobby
Hello, great tutorial, I just subscribed 👏 But I suggest using the other version of Raser for that specific piece. The Raser Origin, the thinner one, it's smaller and less harsh, so it's more suitable for those kind of pieces. Anyways, I hope you make a video about some Balancer alternatives. I enjoy the Balancer as well but I've noticed that they wear out after multiple kits, I guess I enjoy them too much. They're effective but kinda pricey for me, since I keep buying them. I hope there are some good alternatives for that tool.
Thanks for the sub and for the advice! I had been trying different products for polishing the kits, and the balancer is still the best choice, unfortunately. You can swap to cheaper polish boxes, use higher grits or even polishing creams, but the easiness to use and speed of the balancer rest unmatched!
If I am not painting the kit, yes. I like to take my time and not rush through a kit too fast. But, at the end, Gunpla is freedom. There is no right or wrong, just if you’re happy with your result or not 😊
I like your tutorial, very clear in explaining the various techniques and giving options. I personally prefer the raser glass file/balancer combination to deal with nub marks. I do have the thin raser file and this gives a lot more control than the wider one you use in your video. I subscribed.
Sorry for the late reply, I had to go abroad and things got a bit messy! Thank you so much for your kind words and the support, it is really rewarding to know that you enjoyed the video. I have the thin one too, it's really great for precision indeed.
Simple: when you sand it will be impossible to keep both the part and the sanding stick perfectly flat. This will make the surface you are sanding a bit irregular. Going back and forth will enhance this issue. Sanding in the same direction and avoiding to press helps in getting the best result.
![How to Prep Your Gunpla: Removing Nub Marks and Other Surface Imperfections [Tutorial]](http://i.ytimg.com/vi/8I3D66tX9vw/mqdefault.jpg)
![How to Prep Your Gunpla: Removing Nub Marks and Other Surface Imperfections [Tutorial]](/img/tr.png)
Just wanted to say that I appreciate you teaching others to cut the narrow gates on the runner (the sections connecting the pieces to the runner.) I've seen a lot of other youtubers say to cut further down the stems claiming it reduces stress when cutting. In my experience however cutting like that just causes more stress as most standard nippers act more like a wedge and will push the runner against the part causing the still connected nubs to bend and tear. Maybe im doing something wrong, but I too personally advice others to cut the parts out like you did as the gates are (usually) smaller and easier to cut than the thick rods of the runner. Also some advice for new builders dont fret over the stress marks too awful much. Even if you do everything right your bound to end up with at least one and its nothing you cant fix with some plastic cement.
I agree, cutting directly on the runners sometimes rips the connection, leaving big stress marks and I would never recommend doing it!
Really nice video. I recently started and my first build was hguc Zeta with only a rusted double blade nipper and a paper cutter. The nub marks were obvious and cutting with a paper cutter made more marks. The stickers were a disaster. Bought about 10 different grit sandpapers and a hobby knife for the second build (hguc Unicorn Banshee Norn) and OMG the difference. Wish I watched these videos sooner. Thank you
Thank you! Removing the nub marks properly it's always the first step for having a nice looking kit, I'm glad you found the video useful and welcome to the hobby
Hello, great tutorial, I just subscribed 👏 But I suggest using the other version of Raser for that specific piece. The Raser Origin, the thinner one, it's smaller and less harsh, so it's more suitable for those kind of pieces.
Anyways, I hope you make a video about some Balancer alternatives. I enjoy the Balancer as well but I've noticed that they wear out after multiple kits, I guess I enjoy them too much. They're effective but kinda pricey for me, since I keep buying them. I hope there are some good alternatives for that tool.
Thanks for the sub and for the advice! I had been trying different products for polishing the kits, and the balancer is still the best choice, unfortunately. You can swap to cheaper polish boxes, use higher grits or even polishing creams, but the easiness to use and speed of the balancer rest unmatched!
Nice and complete tutorial and comparison.
Thank you!
Do you really sand each part that slow?
If I am not painting the kit, yes. I like to take my time and not rush through a kit too fast. But, at the end, Gunpla is freedom. There is no right or wrong, just if you’re happy with your result or not 😊
great video thank you for this!
Thank you very much!
I like your tutorial, very clear in explaining the various techniques and giving options. I personally prefer the raser glass file/balancer combination to deal with nub marks. I do have the thin raser file and this gives a lot more control than the wider one you use in your video. I subscribed.
Sorry for the late reply, I had to go abroad and things got a bit messy! Thank you so much for your kind words and the support, it is really rewarding to know that you enjoyed the video. I have the thin one too, it's really great for precision indeed.
How to undo mistake on making XXXXG-01 WING GUNDAM step 01-3 C40 facing wrong side
I checked the manual and your best safe bet is using a part separator. Even the one that comes with Lego pieces should be good
Why do you only sand in one direction?
Like, every tutorial sands in one direction, but I've never heard an explanation why.
Simple: when you sand it will be impossible to keep both the part and the sanding stick perfectly flat. This will make the surface you are sanding a bit irregular. Going back and forth will enhance this issue. Sanding in the same direction and avoiding to press helps in getting the best result.
high quality guide
Thank you!
Great video
Thank you so much