Thank you for watching our video! Please let us if you have any questions! Where to buy: bit.ly/16ElantraFrBumper If you need any other auto parts, Visit us at : www.revemoto.com
Hello Edward. Yes, you can most likely do the conversion. The fenders and hood for the elantra range from 2011-2016. The Headlights will always show to be different but make sure they are the same shape. You will probably have to buy a new grille and other accent pieces. We also recommend checking with the Elantra forums. You can call us if you have any more questions, take care!
Hi, is there a part number for the flat head push pins? Also, underneath the bumper, the liner is secured to the bumper with the Phillips type push pins?
There probably is a part number for it but I do not have it. Yes, the Phillips type push pins secure the fender liner below the bumper (5:57). You can purchase the push pins at the dealership for a few bucks. You can also purchase them at your local hardware store, autozone or o'reilly's for a few dollars each.
@@ReveMoto Thank you for the response and thank you for the video. It's very helpful. I would like to ask you your opinion about the inner fender liner. Much like in the video, a potion of the passenger side front fender linder tore off from my car. I can see the window washer fluid reserve exposed now. I actually care less about the chipped bumper because that's cosmetic. But, how critical is it to have that inner fender liner replaced? Is it ok to drive around with the wheel rotating next to the window washer fluid reserve not protected by a liner? I'd appreciate your input on this. Thank you in advance.
@@magdalenaszypulski7986 It's not critical but we would recommend replacing the liner. You don't want debris flying in the engine bay. Fender liners are usually around $50. It's definitely best to just replace to avoid any headaches in the future.
You can take a matching screw to any hardware store an buy one for a few cents. The dealership also sells the screws for around a $1 a piece or the set for $5-ish. Same applies to the plastic push pins, except you can get these at autozone/orielly instead of hardware store.
There is a difference in fitment and minor modifications. Unless you really like the Korean version I would stick to the one your car is made for. Go to www.ReveMoto.com
Sometimes those little tabs break in a car accident or the bracket underneath does and you won't know until you pull the bumper out. You may be able to use a plastic welder to fix the tabs but I am unsure if that is feasible. It's best to replace the bumper or you can even use some double-sided stick tape from 3m. There is a bolt that secures the bumper to the fender, the bumper snaps into the bumper bracket/retainer. If you can still secure it with the bolt you could probably tape the bumper to the fender. Thank you for watching!
Thank you for watching our video! Please let us if you have any questions!
Where to buy: bit.ly/16ElantraFrBumper
If you need any other auto parts,
Visit us at : www.revemoto.com
I have 2013 elantra korea built can i use usa bumper on it
Ty
You're welcome! Glad it helped. if you decide to replace it, check us out www.revemoto.com
Great video...I have 2015 elantra..video helped out alot..
Thanks for watching! Please subscribe, it helps us a lot. 🤘
Do you know the name for the “liner” on top and bottom of the bumper cover? I’m working on my nieces car and all of that is gone. Thanks 🙏
It’s an engine shield cover
Where can I get those pins from for my 2016 Elantra
Wassup yo where are u located N how much do u charge to fix bumper?? I need my car bumper fixed.
We are located in Houston,Tx, but we ship these parts anywhere. Go to www.ReveMoto.com
Hi. Can I know if my 2011 elantra can use a 2016-17 bumper?
Hello Edward. Yes, you can most likely do the conversion. The fenders and hood for the elantra range from 2011-2016. The Headlights will always show to be different but make sure they are the same shape. You will probably have to buy a new grille and other accent pieces. We also recommend checking with the Elantra forums. You can call us if you have any more questions, take care!
Hi, is there a part number for the flat head push pins? Also, underneath the bumper, the liner is secured to the bumper with the Phillips type push pins?
There probably is a part number for it but I do not have it. Yes, the Phillips type push pins secure the fender liner below the bumper (5:57). You can purchase the push pins at the dealership for a few bucks. You can also purchase them at your local hardware store, autozone or o'reilly's for a few dollars each.
@@ReveMoto Thank you for the response and thank you for the video. It's very helpful. I would like to ask you your opinion about the inner fender liner. Much like in the video, a potion of the passenger side front fender linder tore off from my car. I can see the window washer fluid reserve exposed now. I actually care less about the chipped bumper because that's cosmetic. But, how critical is it to have that inner fender liner replaced? Is it ok to drive around with the wheel rotating next to the window washer fluid reserve not protected by a liner? I'd appreciate your input on this. Thank you in advance.
@@magdalenaszypulski7986 It's not critical but we would recommend replacing the liner. You don't want debris flying in the engine bay. Fender liners are usually around $50. It's definitely best to just replace to avoid any headaches in the future.
How can I tell if I have the North American or the Korean version?
If your VIN# has a "K" in the first character, it is Korean built. If the VIN starts with "5" it's USA built. Thank you for watching!
If some of the screws are lost how can you get others
You can take a matching screw to any hardware store an buy one for a few cents. The dealership also sells the screws for around a $1 a piece or the set for $5-ish. Same applies to the plastic push pins, except you can get these at autozone/orielly instead of hardware store.
Ooo thank you so much. Also could you make a video installing the auxiliary for the 2016 Hyundai Elantra.
Will a Korean bumper fit on the USA model?
There is a difference in fitment and minor modifications. Unless you really like the Korean version I would stick to the one your car is made for. Go to www.ReveMoto.com
Is it possible to reattach the piece that you "pushed into" at 2:07? I got to pulling and that part got to tearing off like loose leaf on paper!
Sometimes those little tabs break in a car accident or the bracket underneath does and you won't know until you pull the bumper out. You may be able to use a plastic welder to fix the tabs but I am unsure if that is feasible. It's best to replace the bumper or you can even use some double-sided stick tape from 3m. There is a bolt that secures the bumper to the fender, the bumper snaps into the bumper bracket/retainer. If you can still secure it with the bolt you could probably tape the bumper to the fender. Thank you for watching!