Brent, I commend you. This video was very well done and detailed. I believe anyone watching this how-to-video and attempting to do their own counter-top will have similar results. Nicely done!
Another trick to help get the concrete to settle down in that I've done is of you take a Sawzall blade and grind the teeth off then screw a block of wood to the blade you can then use that contraption in your Sawzall and lay the wood on top of the concrete and vibrate from the top to force concrete down. Then just add more concrete to fill the form back up. Works in a pinch.
Nice job Brent, I have used some of the indoor sealer and shine from countertop solutions with amazing results. Made my own and my daughters countertops. Next three videos I post will be her kitchen. Thanks again for a great video.
Been layin concrete for about 35 years in 2018 thankfully retired from busness but lates a lot of it in my time glad i’m out of it however gotta say great video great job thanks, -clayton
My biggest question about this project was how to figure in the finished dimension of both the fascia material (stone veneer in my case) and the finished concrete top so that the grill would play nicely with both finished surfaces. Your project was the most detailed I’ve seen on the subject and I really appreciate all the time you took. I’m still on the fence between pour in place counters or making a mold and then flipping the counter. I’m a gas log manufacturer so I have a lot of experience with mold making and concrete products but this is new territory for me!
@@deeruckussolutions8772 yup. I went ahead with the project and the initial quality is fantastic. I would never advise anyone without being a true expert so I can’t yet speak to the longevity of the build. My best advice was to simply get all materials on hand first so you can get your best measurements in person. The manufacturers measurements were not accurate enough for me.
😂 I like your style, commentary, and easy to hear voiceover. Great job. Just found your channel and just subscribed. Where have you been all my Covid TH-cam watching year? 👍🏽
Try using the front edge of the sander base against the form, it will hit much harder and work the air out much more efficiently. I have used a thick wet cast concrete and can work just about all the bubbles out
Great to hear and thanks so much for watching. Can you get Countertop form and concrete mix products in the UK or are you going with a different product line? Thanks for the support and hope you subscribed.
BYOT Hi it’s something I’m thinking about at the moment so not at the stage yet for buying products. I don’t think I can buy the formers you used, hopefully I will find a different brand here. Yes I subscribed looking forward to getting some more ideas.
Dude your channel is so addictive and satisfying that a person like me who doesn't even have drilling machine is watching how to make tables😂 amazing content man👍😁
Love hearing that PB. I do all of my own editing and take pride in producing high quality content. Thanks so much for watching and all the support. Greatly appreciated.
I've been looking into this form system for a while. Looks like a pretty sweet system. I'm a tile contractor and would love to expand my offerings. This might be the one. And I am wondering if the cost is less or comparable to granite, of course it's also what a customer may want no matter what.
Great to hear bud and thanks so much for watching. As for price the concrete is obviously much less then a solid surface but you also have to take into account the amount of time you are putting in compared to a set it and forget it with granite. Pretty comparable when it’s all said and done.
We all have to start somewhere, Right? Thanks for the kind words Norman and all the support. Lets hit 100K this year and see how long it takes to get to 500K. I bet it will take less time then getting to 100k.
Hello, great video! I’ve ordered the countertop forms you’ve linked. Looks like it’ll save a lot of time. A have a question, you mentioned in a previous comment that you used Airtex ovp for the walls. Did you reinforce it with any kind of mesh?
Serious question: what is the reason for concrete reinforcement in the middle of the slab? Isn't this where the tension/compression converge and there is no compression and tension? I would think reinforce near the top or bottom depending on tension or compression. Cool forming system
home depot carries a concrete brand that is pretty much almost pure liquid and it solidifies in 1-2 hours or so. I can see that working better here. There would be no need of screeding or floating at all
How did you remove the z form against the vinyl siding? Looks like there is no clearance to remove it. Did you leave it there? If so, did you cover it up with concrete?
The backer board is just your standard cement board. Then the Ardex OVP is used in lue of stucco. Hope that makes sense Miguel and thanks so much for watching.
My home is good looking but this house is better haha! This is my friends house I did the project for. Thanks so much for watching and glad you like the video.
Great video - not sure if you still monitor the comments or not, but I did have a very specific question about how you used the z countertop forms along the inside area of the grill cut out. You touched on it briefly in the video, but it wasn’t very clear. I’ll be doing mine this weekend using the same system - would it possible to get clarification? Did you use and modify the square edge (snap off) form or the pre-cast (non-snap off) form?
Hi, thanks for sharing your build. We like the color. Did you use any color additives to the mix or sealer? Is the final color represented in the video after 17:00? Thanks!
Hello Brent, I wonder if cement can be thinner like 1 inch? I have a countertop with tiles(tiles ages along the years), but I want to makeover it, can I pour 1-inch cement on top of it? Or any better idea how I can makeover the countertop without breaking it? Thanks!
Great to hear William and thanks for watching. I have provided links for all of the products in the description of this video. Take a look and let me know if you have any questions.
At 10:25 I noticed a significant bulge along the length of the form. I'm about to do a 10' counter with the same form kit and I'm trying to figure out how to avoid that.
Great catch Justin and that did happen but I just ground it down slightly with that diamond wheel I used and is linked in the bio of the video. To avoid I would make sure to get the mix runnier than I did and if you need to add a clamp You can always do that in the end. Thanks for watching and hope you subscribed.
Good question Joe. In all honesty I don't know what would happen but self leveling products are normally very thin layers since they are so liquidy. Might have to try this out and let you know what i find out. Thanks for watching and the support Joe.
Only one of the BEST Movies ever made!!! HaHa! If you haven't seen it, check it out. Thanks so much for watching Chris, especially since I know you watched the whole thing :)
There is still a couple of inches from the house to the countertop so I was able to bend it off still. Thanks for watching Armando and hope you enjoyed the video.
Don't tell me this is the first time you've heard the word structurability.....lol! Words are hard sometimes Jonathan haha but thanks for watching and hope you enjoyed the video.
FYI. Your so called HVAC tape IS "DUCT TAPE". The rubbery, water resistant tape that everyone erroneously calls duct tape is "DUCK TAPE". Do not use duck tape for air ducting. Some day we'll clear up this mess.
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Brent, I commend you. This video was very well done and detailed. I believe anyone watching this how-to-video and attempting to do their own counter-top will have similar results. Nicely done!
Thank so much Leah. I greatly appreciate your kind words and receiving comments like this from someone I truly respect means a lot :)
@@BYOTools Me as a girl, I am going to try it:)
th-cam.com/users/shortsa_UgXzRM30Q?si=q2wSZfiHpx6U0iZW
Dude, that is absolutely beautiful! Thanks for sharing the imperfections and the "character" along the way. Mr. Wolf would be proud ;)
This is an amazing tutorial! Thank you for taking the time to help those of us who are a bit clueless.
Another trick to help get the concrete to settle down in that I've done is of you take a Sawzall blade and grind the teeth off then screw a block of wood to the blade you can then use that contraption in your Sawzall and lay the wood on top of the concrete and vibrate from the top to force concrete down. Then just add more concrete to fill the form back up. Works in a pinch.
I’m just here looking at Brent. But learned to do something I’ll probably never do in the process. It’s a win win. 😅😂❤
Nice job Brent, I have used some of the indoor sealer and shine from countertop solutions with amazing results. Made my own and my daughters countertops. Next three videos I post will be her kitchen. Thanks again for a great video.
Great to hear Jim and thanks so much for watching. I'll have to check out those videos of yours once their posted.
Been layin concrete for about 35 years in 2018 thankfully retired from busness but lates a lot of it in my time glad i’m out of it however gotta say great video great job thanks, -clayton
Great to hear Clayton and thanks so much for watching. Glad I didn’t disappoint a true pro.
My biggest question about this project was how to figure in the finished dimension of both the fascia material (stone veneer in my case) and the finished concrete top so that the grill would play nicely with both finished surfaces. Your project was the most detailed I’ve seen on the subject and I really appreciate all the time you took. I’m still on the fence between pour in place counters or making a mold and then flipping the counter. I’m a gas log manufacturer so I have a lot of experience with mold making and concrete products but this is new territory for me!
Still no response 😂 don’t you love it
@@deeruckussolutions8772 yup. I went ahead with the project and the initial quality is fantastic. I would never advise anyone without being a true expert so I can’t yet speak to the longevity of the build. My best advice was to simply get all materials on hand first so you can get your best measurements in person. The manufacturers measurements were not accurate enough for me.
😂 I like your style, commentary, and easy to hear voiceover. Great job. Just found your channel and just subscribed. Where have you been all my Covid TH-cam watching year? 👍🏽
One of the best explained process for concrete countertop. Thanks!
Try using the front edge of the sander base against the form, it will hit much harder and work the air out much more efficiently. I have used a thick wet cast concrete and can work just about all the bubbles out
Great video look forward to trying it out myself on my first time project. also interested on the stucco finish on the backerboard
Great to hear mike and thanks so much for watching. Hope you subscribed
Had me at the countertop, locked me in with Pulp Fiction. Well done!
love the barbecue cement table! I might just have to try a smaller version for a table. thank you
Great to hear Sandy and thanks so much for watching. Let me know how your own table top works out :)
Looks awesome and you made this look really easy
Great work! Always inspiring to watch! I just wish I had space to do this project!
Great to hear and thanks so much for watching and the continued support RR! Much appreciated.
This is very nice. My question is: the base upon which you pull the concrete mix, when the concrete drys up, do you remove it or you leave it there?
Great question and you just leave the base in place. No way to get it out and it just adds support. Thanks for watching and hope you subscribed.
excellent video!! i'm doing the same thing: a counter for my big green egg and small green egg. thanks for this great tutorial!!
Good job!!! Why you did not secured all the mesh?
I will add some black color it will look even better. Love your work.
The finished project looks amazing, and a great video. I’m thinking of trying something like this myself in the UK 🙂
Great to hear and thanks so much for watching. Can you get Countertop form and concrete mix products in the UK or are you going with a different product line? Thanks for the support and hope you subscribed.
BYOT Hi it’s something I’m thinking about at the moment so not at the stage yet for buying products. I don’t think I can buy the formers you used, hopefully I will find a different brand here. Yes I subscribed looking forward to getting some more ideas.
Dude your channel is so addictive and satisfying that a person like me who doesn't even have drilling machine is watching how to make tables😂 amazing content man👍😁
Love hearing that PB. I do all of my own editing and take pride in producing high quality content. Thanks so much for watching and all the support. Greatly appreciated.
Word of advice. Use portland cement to go over the entire top to fill in holes then sand it. Won't look like u didn't know what you're doing.
You should make DIY videos. Sounds like you know better.
@@derekharp2805 30 years in the business you get to know a few things. Videos might happen this year, just hard to find time
Very good idea the vibration mode 👍👍👍
Great to hear and thanks for watching Mac. Hope you subscribed.
Great video. Would you happen to have an idea of what the budget for just the counter top was? Thanks - looking to do myself.
th-cam.com/users/shortsa_UgXzRM30Q?si=q2wSZfiHpx6U0iZW
è un ottima idea il top in cemento per il barbecue,saluti da italia
bello sentire e grazie mille per la visione e il continuo supporto
I've been looking into this form system for a while. Looks like a pretty sweet system. I'm a tile contractor and would love to expand my offerings. This might be the one. And I am wondering if the cost is less or comparable to granite, of course it's also what a customer may want no matter what.
Great to hear bud and thanks so much for watching. As for price the concrete is obviously much less then a solid surface but you also have to take into account the amount of time you are putting in compared to a set it and forget it with granite. Pretty comparable when it’s all said and done.
Underrated channel for sure!
We all start somewhere, right? haha. Thanks for the kind words and for watching. The channel is just going to get bigger and better from here
Would you recommend using a concrete flow solution to help it self level when pouring?
I have character! lol great job!
the way you make video is awesome, you should get at least 500k subs
We all have to start somewhere, Right? Thanks for the kind words Norman and all the support. Lets hit 100K this year and see how long it takes to get to 500K. I bet it will take less time then getting to 100k.
You are adorable! Very inspiring and instructional.
Well I'll for sure take that as a complement Emilio haha. Great to hear and thanks so much for watching. Hope you subscribe.
@@BYOTools need to check if I can find those forms for the borders in Canada. What's the name of those?
GLOVES!!
Everything else is fine though. Nice vid.
Nice work. Looks great.
Hello, great video! I’ve ordered the countertop forms you’ve linked. Looks like it’ll save a lot of time.
A have a question, you mentioned in a previous comment that you used Airtex ovp for the walls. Did you reinforce it with any kind of mesh?
Serious question: what is the reason for concrete reinforcement in the middle of the slab? Isn't this where the tension/compression converge and there is no compression and tension? I would think reinforce near the top or bottom depending on tension or compression.
Cool forming system
Great video! what is the length of this countertop?
Question not use gravel in the mix? and... do you have a video on how to pour this for future tile work. I prefer to tile
Great video, Brent!
Great to hear Joe and thanks so much for watching. glad you enjoyed the video.
home depot carries a concrete brand that is pretty much almost pure liquid and it solidifies in 1-2 hours or so. I can see that working better here. There would be no need of screeding or floating at all
Interesting. I'll have to check that out. Thanks for the tip Salvador!
Do you know the brand?
How did you remove the z form against the vinyl siding? Looks like there is no clearance to remove it. Did you leave it there? If so, did you cover it up with concrete?
First thanks for the video... Looks great!! One question, three sides I noticed you had backer boards. These were stucco?
The backer board is just your standard cement board. Then the Ardex OVP is used in lue of stucco. Hope that makes sense Miguel and thanks so much for watching.
Really nice work, cost more or less than granite?
Well Done, Dude
Is it Mr. and Mr. BYOT?
Great video, thank you. (Pretty sure it’s Pulp Fiction)
Ur home is so beautiful great job
My home is good looking but this house is better haha! This is my friends house I did the project for. Thanks so much for watching and glad you like the video.
BYOT with all the stuff I seen u do to ur home it must be very nice 👍
Great video - not sure if you still monitor the comments or not, but I did have a very specific question about how you used the z countertop forms along the inside area of the grill cut out. You touched on it briefly in the video, but it wasn’t very clear. I’ll be doing mine this weekend using the same system - would it possible to get clarification? Did you use and modify the square edge (snap off) form or the pre-cast (non-snap off) form?
I loved the closing song(Proudly South African) and of coz the Tutorial
Great to hear Tsepo and I feel that song is a perfect way to end my videos. Thanks so much for watching and hope you subscribed.
Such a catchy song, what's the song?
@@wadeholden1051 Iphathaphatha Mariam Makeba
Not bad at all but, do you have a video as to how you did the framing of that countertop, I noticed you used some kind of metal. Is that correct?
Great video. Thanks for sharing
Great to hear and thanks for watching RWA. Greatly appreciated.
Hi, thanks for sharing your build. We like the color. Did you use any color additives to the mix or sealer? Is the final color represented in the video after 17:00?
Thanks!
Beautifull Work
I think putting that much mix in one spot is the primary culprit for the mesh sinking so much.
Good note Terry and thanks for mentioning it. Hope you enjoyed the video and thanks for watching.
Hello Brent, I wonder if cement can be thinner like 1 inch? I have a countertop with tiles(tiles ages along the years), but I want to makeover it, can I pour 1-inch cement on top of it? Or any better idea how I can makeover the countertop without breaking it? Thanks!
Nice job!!
Great to hear! Thanks so much for watching ;)
looks great
Someone may have got there first, but your quote is from Pulp Fiction. Harvey Keitel I think it was.
Well done Paul! Only one other person mentioned it so I'm glad you spoke up. Love that movie. Thanks for watching and hope you enjoyed the video.
There is a serious bow out on the long side at 10:40. Nothing that can't be sanded out of course...
Nice job where do you order all the materials and how order the BBQ Grill station,
Great to hear William and thanks for watching. I have provided links for all of the products in the description of this video. Take a look and let me know if you have any questions.
what did you use on the cement boards, micro topping?
How many 60lb bags did you use for this counter top. I assume it was 8’ by 2.5’ surface. Thanks
Nice job love it 👍
What is the framing material? Galvanized or stainless steel? Are does pre-modes?
would it be possible to pour epoxy over the concrete for a finish? would epoxy hold up in outdoor conditions?
What happened to sand cement ,aggregate and reinforcement with steel? Looks like I did mine the hard way.
I didn't see how the bbq was held in place. Did the counter top hold it?
At 10:25 I noticed a significant bulge along the length of the form. I'm about to do a 10' counter with the same form kit and I'm trying to figure out how to avoid that.
Great catch Justin and that did happen but I just ground it down slightly with that diamond wheel I used and is linked in the bio of the video. To avoid I would make sure to get the mix runnier than I did and if you need to add a clamp You can always do that in the end. Thanks for watching and hope you subscribed.
@@BYOTools I certainly did subscribe. You seem to be doing all the things I have on my list to on our place. Thanks again.
What if I used self leveling concrete. What are your thoughts on that?
Good question Joe. In all honesty I don't know what would happen but self leveling products are normally very thin layers since they are so liquidy. Might have to try this out and let you know what i find out. Thanks for watching and the support Joe.
Where can u purchase the frame for the countertops?
That form costs more than what I spent on my hole countertop....
word spelling Bro
I love it
Pulp Fiction reference…….nice
How thick will the concrete counter be?
Approximately 3" thick. Thanks for watching Ramiro and hope you enjoyed the video.
Awesome💪👍
Looks amazing...what is Pulp fiction too haha
Only one of the BEST Movies ever made!!! HaHa! If you haven't seen it, check it out. Thanks so much for watching Chris, especially since I know you watched the whole thing :)
How much did all the parts cost (concrete, doors etc...)?
Everything accounted for will probably add up to around $6k Andrew. Thanks for watching and hope you enjoyed the video.
How did you manage to rip the form/strip up against the house.
There is still a couple of inches from the house to the countertop so I was able to bend it off still. Thanks for watching Armando and hope you enjoyed the video.
Great video, great finish.
How many hours all up? How many did you bill? 🤣
Haha! Both very good questions Paul LOL! All together it took around 40 hours total. Thanks so much for watching and glad you enjoyed the video.
Those hanging plants are going to catch hell from the grill. 😂😂😂😂😂
They are high but not that high haha! We will see. Thanks for watching Jody and hope you enjoyed the video.
BYOT yeah man I enjoyed it. Just messing with you anyway. Have a great day 👍🏻
Way easier, I did mine of wood frame. I bit harder but got it done...
Ya that ledge system really helps. Great to hear you tackled it yourself Jesse. Thanks for watching and hope you enjoyed the video.
The movie was Oxford Blues
Instead of cutting those edges why not just put a 1 1/8" piece of square stock in your form before you pour the concrete?
I believe the last quote u said is from the movie "Pulp Fiction"
Well done for knowing your pulp fiction buddy. Thanks so much for watching and hope you enjoy the video
Dope!
Diesel fuel and wood forms never let me down 🤷🏻♂️
The support was not sufficient. When you look at the side it is bending outwards
Think just a little more wet and it would have been a bit less work for you.
Turned out great however! :)
Completely agree and thanks so much for watching Jake. I'll remember MORE water next time haha. Hope you subscribe.
Help! I hump harp seals!
no slurry? interesting...
Why is craftsmanship just way better in America that the UK..?
Girl is tough, she can help you lift a grill!!! Thats what i look for in a women.
Looks nice, but those plastic forms are stupid expensive.
They aren't cheap thats for sure haha. They really are worth the money though in my opinion. Thanks for watching and hope you enjoyed the video.
Look how bowed out that back edge is.
Say goodbye, Raquel.
Pulp Fiction
Well done! You must be a fan. Thanks for watching the WHOLE video.
Would adding a plasticizer help with the pour and bubble release?
That back side looks very crooked. The weight of the concrete bowed out the plastic form. 10:42 =/
4:48 "structuabilty"?
Don't tell me this is the first time you've heard the word structurability.....lol! Words are hard sometimes Jonathan haha but thanks for watching and hope you enjoyed the video.
FYI. Your so called HVAC tape IS "DUCT TAPE". The rubbery, water resistant tape that everyone erroneously calls duct tape is "DUCK TAPE". Do not use duck tape for air ducting. Some day we'll clear up this mess.
Why not just rent a small concrete vibrator? Why not make the concrete more fluid by adding an extra quart of water?