I bought another non running Cat D7F missing parts. Will it start. What the heck did I buy this time

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ธ.ค. 2024

ความคิดเห็น • 648

  • @earlearl8850
    @earlearl8850 ปีที่แล้ว +31

    Mr. C&C, It is truly Amazing to see a Owner, Boss, Etc Dad and gets his hands dirty and a wealth of knowledge. But most importantly you do not scream and yell at your employees or family. You are a good person.

    • @petereriksson1390
      @petereriksson1390 4 หลายเดือนก่อน +1

      @@earlearl8850 100% Agree with you! Always motivation.........all the time....make results, from the floor to your wallet Sir! From Peter Eriksson Sweden Europe

  • @guy2536
    @guy2536 ปีที่แล้ว +10

    You started to say one of my old quotes,i think,..”there isn’t anything that can’t be fixed with enough time and money “

  • @Markworth
    @Markworth ปีที่แล้ว +9

    "Crossthread is better than no thread!" I died. Not something I'd want to hear regarding a diesel engine starter, but I may have taken part in similar shenanigans in the past.

  • @jeffreyneihart1614
    @jeffreyneihart1614 2 ปีที่แล้ว +101

    Clint, I just love when you bring this old iron back to life!! Those old Cats are hard to kill!! Thanks for taking time to video it. Keep them coming!!

    • @frankcooper6911
      @frankcooper6911 ปีที่แล้ว +1

      LoL

    • @jdsparky288
      @jdsparky288 ปีที่แล้ว +4

      Yeah! Them cats have nine lives around Clint!😂

  • @DouglasLaws-e3h
    @DouglasLaws-e3h 19 วันที่ผ่านมา +1

    Thanks for inviting us in your shop and watching y’all work on the equipment..

  • @vaughnhill3437
    @vaughnhill3437 2 ปีที่แล้ว +64

    There must be a market for the older equipment. People dont wanna mess with all that emissions related equipment

    • @C_CEQUIPMENT
      @C_CEQUIPMENT  2 ปีที่แล้ว +19

      Sure is

    • @sidcostello7532
      @sidcostello7532 ปีที่แล้ว

      Those days are quickly coming to an end. It is currently illegal to put a pre-smog machine on a job in California. All earthmoving equipment must be registered with it's registration number visible. There is a small window for some exemptions for ag related machines, but it's a very small window and only buys you a couple years. Soon, everything pre-emission controlled will be completely illegal. Within 5 years the entire Country will adopt the same policy and pass the same laws.
      Everybody who's voted for and continues to vote for democrat candidates brought this on to themselves. Trump was in the process of getting rid of the federal intrusion by the green new dealers....but voters decided they needed a mentally retarded idiot as president more than fixing anything.

    • @needsaride15126
      @needsaride15126 ปีที่แล้ว +19

      Emissions aside. No computers, sensors and so on to deal with. The old stuff a person/owner can still work on themselves.

    • @sheldon-elaynehuebner9807
      @sheldon-elaynehuebner9807 ปีที่แล้ว +1

      @@C_CEQUIPMENT 0

    • @Fitz710
      @Fitz710 ปีที่แล้ว +1

      I think it’s way more than just emissions. Nowadays CAT, John Deere, etc make every part serialized and nothing interchangeable without going to a dealer, all controlled by the computer.

  • @jameshoekzema3172
    @jameshoekzema3172 2 ปีที่แล้ว +2

    That elf yelling “ is the parking brake on “ really got me!

  • @AdelinoGambiarras
    @AdelinoGambiarras 4 วันที่ผ่านมา

    Another one for the books I do feel happy to see every project working in the end one way or another 👍 👌

  • @reclininggamer
    @reclininggamer 2 ปีที่แล้ว +34

    So glad I found you all thru Dirt Perfect. We all know it wont be snowing in DPs videos until March. Thanks for taking the extra time to make the videos while you all do what you do.

  • @donalddehaven3229
    @donalddehaven3229 2 ปีที่แล้ว +36

    What a great company to work for, to get to work on all the various equipment. I’m convinced there isn’t anything you guys can’t fix. It’s always enjoyable to watch you and Kevin. Love the channel.

    • @C_CEQUIPMENT
      @C_CEQUIPMENT  2 ปีที่แล้ว +4

      Thanks Donald

    • @ronniewilliz153
      @ronniewilliz153 ปีที่แล้ว +1

      You wanna know the one thing most ppl can't fix lol that's them selfs, lol but yea I agree they sure are great with wrenches hearing.

    • @jamesmorton8431
      @jamesmorton8431 ปีที่แล้ว +1

      Don’t forget Randy… He’s part of the team too 👍🏻

    • @WaymanColemanFishing
      @WaymanColemanFishing ปีที่แล้ว

      @@C_CEQUIPMENT where do you get your engine rebuild kits from for john deere

    • @C_CEQUIPMENT
      @C_CEQUIPMENT  ปีที่แล้ว +1

      @@WaymanColemanFishing Deere or alliance

  • @leonardbartley5670
    @leonardbartley5670 2 ปีที่แล้ว +41

    Clint you never fail to deliver a great video. Always interesting.

  • @jeffhenson1994
    @jeffhenson1994 2 ปีที่แล้ว +5

    The struggle is real moving a dead dozer is kinda like hearding cats lol

  • @fromcitytogritty9122
    @fromcitytogritty9122 2 ปีที่แล้ว +26

    Well at least I know who I have been bidding against down here in Texas. Watched this one sell in September. Was finally able to confirm my suspicions with the number on the blade. Actually really awesome to see you boys take on a project I was thinking about doing myself. I have been learning a lot. Keep it coming, really enjoying it.

    • @johnfisher7143
      @johnfisher7143 ปีที่แล้ว +1

      Just interested in how much this went for at auction, sounds like you’d know if you were bidding too? Cheers from Australia 😀😀

    • @billvandorn5332
      @billvandorn5332 ปีที่แล้ว +1

      @@johnfisher7143 I always wonder what they pay too! What is a fair and reasonable price to pay for such an item?
      All that is required for a sale is a willing buyer and, a willing seller but it really doesn't tell me what's a fair price.

  • @Sojourning_
    @Sojourning_ ปีที่แล้ว +3

    Good Job Boss; much enjoyed your video; I'm a retired union HDR/W mechanic:
    middle 70's now:
    A D7 series I can't recall seeing one on any of the dirt spreads I worked on over the life time of working: But here's the big but: during my service time in the Army, in Vietnam, there were a number of military Companies with as many as 30 of those cats fixed to what was known as Roman Plow Blades: I ran both blades, the bull blade and the Roman plow blade, Generally what happed, I ran over a land mine, one of two things, the whole cat was destroyed or just the blade, I get an option, I took the bull blade.
    Although a medium size cat, I found it to be a herkie cat to do some serious dirt work
    with it; great machine. we used the winch on them often.
    Although all the design engineered Cat equipment today is been incorporated
    with high tech computer systems: they do a great job; I much more favor the
    machines before the computers. I hit the subscribe..... I'm some-what surprised
    to see there is no over head rail crane in the shop;
    awesome lay out you have there. I like seeing a yard kept in an orderly
    manner as yours is. The Lord Bless you and yours.

  • @clintonmississippi2108
    @clintonmississippi2108 2 ปีที่แล้ว +14

    Clint,
    I also really enjoy seeing you and your team getting these older machines cleaned/fixed and ready for constructive use.
    Sam

  • @robertshutran3250
    @robertshutran3250 ปีที่แล้ว +3

    I REALLY ENJOY WATCHING YOU MAKE THESE MACHINES THAT WON'T RUN AND YOU MAKE THEM RUN

  • @harryhearn3667
    @harryhearn3667 4 หลายเดือนก่อน +2

    this first time i have seen your videos and am impressed with your knowledge of these old machines and different models as well. living in kentucky most all my life and started running equiptment in 1967 on a roller, 1968 a cat 631 scrapper, 1971 on a cat 46A d-8 and many more over the years until i retired in december at age 76, i am one who likes the old equiptment so much over the new junk that we have today. i am now a big fan of your videos and keep up the good work.

  • @Nerad137
    @Nerad137 ปีที่แล้ว +5

    Thank you guys for making relaxing videos of messing around in the shop fixing stuff. I can't express how much I enjoy watching.

  • @johnlocke1018
    @johnlocke1018 2 ปีที่แล้ว +6

    You can’t beat those old Cats. Enjoy watching your videos.
    Kevin done taught me a new saying, “Cross thread is better than No thread”. 😂

    • @dennisholst4322
      @dennisholst4322 ปีที่แล้ว

      Fuel guy must of been pissed off about something

  • @Kenny-z9p
    @Kenny-z9p 2 หลายเดือนก่อน +2

    Fired quick , good sign. Going to be a great one . I really enjoy watching!👌

  • @davidkeith8687
    @davidkeith8687 2 ปีที่แล้ว +12

    Love these non running videos!

  • @caesar1295
    @caesar1295 2 ปีที่แล้ว +13

    Your dad’s was right it fired after only a half a turn or less, that was incredible after setting that long. Your guys sure know your dozer’s in and out. Another good and informative video guys thanks.

  • @raycollington4310
    @raycollington4310 2 ปีที่แล้ว +17

    These videos are so informative. At least with this ex-military kit you know the issues are largely lack of use, storage related and the owner had sufficient funds to repair stuff properly. While I know nothing about plant, I think some of the Deere stuff of this era looks better built and designed than the Cat is. Thanks as ever Clinton, it was good to see Santa helping Kevin on this one.

    • @sidcostello7532
      @sidcostello7532 ปีที่แล้ว +2

      What specifically on the "Deere stuff" looks to you as being "better built and designed than the Cat is" I'm very curious

    • @raycollington4310
      @raycollington4310 ปีที่แล้ว +1

      @@sidcostello7532 As I say, I don't know. Seeing those old Cat cold starts always look painful. I bought some trucks in UK with 3306 engines and nearly got fired as they were so bad with exhaust manifolds, turbos and always struggled to comply with emissions. I can see current Deere stuff is not that good. Just subtle things make me think the Deere ex-military dozers look a bit less painful. As I say I haven't lived with both brands. Cat also made a right mess of building trucks.

    • @jake4x41982
      @jake4x41982 ปีที่แล้ว +1

      Those cats are not the same vintage as all the 850js he's been. doing just fyi

  • @royellam4014
    @royellam4014 2 ปีที่แล้ว +17

    I like to see you people bring this old iron back to life. I feel that most of this equipment if properly maintained will outlast much of the new stuff and is a lot less complicated. C&C equipment is very thorough with every machine you work with. Clinton, you and Kevin, and the rest of the crew make an awesome team. Keep up the good work.

  • @jbro779
    @jbro779 2 ปีที่แล้ว +8

    Love watching you all revive the old iron others have given up on.

  • @davidkojis80
    @davidkojis80 ปีที่แล้ว +1

    I remember when we got the D7E when they replace the Allis HD16in the early 70s Thanks for Bringing that back

  • @EC-xo4ti
    @EC-xo4ti 2 ปีที่แล้ว +6

    really like the d7f, seems like a timeless machine, early 70s to late 90s

  • @cornwasher
    @cornwasher ปีที่แล้ว +3

    I really admire the restoration work performed on these old cats. New filters and fluids are a great place to start to rework 'low hour' units. Oh yeah, the 'R' on the switch stands for 'RUN', I believe.

  • @williamgraham8809
    @williamgraham8809 2 ปีที่แล้ว +11

    From Putaway to put back in service, amazing as usual! We would expect nothing less from Y'all!

  • @stevetavares1837
    @stevetavares1837 2 ปีที่แล้ว +5

    Love the part , when Kevin said good thing Iam here for you I will hold the camera for you! That was golden. LMAO, you 2 work good together. Best regards Steve from ca.

    • @jmwarden1
      @jmwarden1 2 ปีที่แล้ว

      I got a chuckle out of that too

    • @C_CEQUIPMENT
      @C_CEQUIPMENT  2 ปีที่แล้ว

      Lol

  • @tomtke7351
    @tomtke7351 4 หลายเดือนก่อน

    If one were to think that machines have a soul this one wants to be alive, is a keeper, a runner, a go-to device. Hope it finds a good home.

  • @darrylridlon5918
    @darrylridlon5918 2 ปีที่แล้ว +16

    As usual another great video. Love watching you guys it is awesome the content you create in your videos. Keep them coming for us to enjoy.

  • @arthurbiringer5676
    @arthurbiringer5676 ปีที่แล้ว +2

    Another award winning job!

  • @pretrip24
    @pretrip24 4 หลายเดือนก่อน

    Love seeing old iron coming back to life.

  • @davidfisher12865
    @davidfisher12865 ปีที่แล้ว

    Work fascinates me, I could watch it for hours.

  • @quietbrianquiet
    @quietbrianquiet 2 ปีที่แล้ว +7

    Always love the mechanical content. Great video thanks for letting me sit alongside of you and watch and learn!

  • @andymack5093
    @andymack5093 ปีที่แล้ว +3

    Bringing these old machines back from contemplating life in some forgotten part of the world is always good, and we know your "will it starts" are no bull. Jeez that motor laying idle since 2008 (I think you said?) sounded so smooth are you sure it's a "Clatterpillar"? lol..... Great to see Dad as your special guest for the start up. You might have to try and get DP Mike to bring Jerry for the next one, and then getting him to put its through its paces would bring back great memories for us when these no-nonsense machines and top operators reigned supreme. Well done again Clint and Kev.

  • @chrislindquist2003
    @chrislindquist2003 2 ปีที่แล้ว +3

    Man what a sweetheart of a dozer. Can't wait to see this one done!

  • @tsparky236
    @tsparky236 ปีที่แล้ว +6

    Love the way you guys work so well together. It’s like you are one mind working? Love these informative videos, makes an old operator wish he was young again. Thank you

  • @ipaddlemyowncanoe.7441
    @ipaddlemyowncanoe.7441 ปีที่แล้ว

    It's amazing it sits all that time and then we need a bit of work on it. Put it all back together. It fires right up. 👍👍🙂🇨🇦

  • @dan92677
    @dan92677 3 หลายเดือนก่อน

    I'll second that !!! Amazing !!! Fun to watch!

  • @Fatamus
    @Fatamus 2 ปีที่แล้ว +3

    Boy that runs n sounds nice👍 lot of work you put into your videos and most of the good stuff goes on the cutting room floor. Then you have to work on the rig and keep Kevin focused on task to boot. 🤣😂🤣
    thanks for your time and patience .... 👍😁
    Good job.

  • @spideybrent
    @spideybrent 2 หลายเดือนก่อน

    Hello from Moosomin,Saskatchewan,Canada you have great videos and great at communicating. Thanks for sharing. 😊😊😊

  • @arvbergstedt3303
    @arvbergstedt3303 ปีที่แล้ว

    I seen a coal mine with Fiat-Allis, Komatsu, Deere, and Cat back in the 80s. A few years and all they would buy was Cat. Way better all around. Power hydraulics cab reliability tough. Rebuildable many times over.

  • @blueocean9305
    @blueocean9305 ปีที่แล้ว

    This reminds me that back breaking, rotator cuff tearing and hernia ripping work can be fun. Great video.

  • @thebear5454
    @thebear5454 2 ปีที่แล้ว +1

    Oh boy, this ought to be good. Bringing life back to a refuge from the scrapyard makes for a great video. 👍👍

  • @williambryce8527
    @williambryce8527 ปีที่แล้ว

    I love seeing and hearing the old CATS run. Not as fancy as the new electronic machines. But, well outlast all of them.

  • @johnfisher7143
    @johnfisher7143 ปีที่แล้ว

    “Don’t want to be doing any 24 volt welding” That had me rolling, too easy to let all the smoke out of those old harnesses if you’re not on the ball. Great vidya, love your work 😆👍

  • @Kenny-z9p
    @Kenny-z9p 2 หลายเดือนก่อน +1

    I prefer the old iron .👍

  • @leeholland5827
    @leeholland5827 2 ปีที่แล้ว +4

    Give kevin a good old bonus for this years Xmas please clint as i wouldn't be watching every video you two put out if it wasn't for the banter between kevin an yourself.
    Have a great Christmas and new year to you and the hole ov your family and your team 👍👍

  • @glenschumannGlensWorkshop
    @glenschumannGlensWorkshop ปีที่แล้ว

    She sure fires up quick. Thanks.

  • @timothymckern8956
    @timothymckern8956 2 ปีที่แล้ว +1

    I love watching these videos brings me back to my childhood with my dad working on cats

  • @robstuckey
    @robstuckey ปีที่แล้ว

    love it. whatever kevin gets paid you need to pay him more! the man was born for television

  • @ArizVern
    @ArizVern ปีที่แล้ว

    LIKE YOUR VIDEOS. RETIRED 78, USAF, JET MAC, VFW.

  • @darkslatesky
    @darkslatesky ปีที่แล้ว

    Great documentation demostrating your expertise on CAT

  • @andytaylor3098
    @andytaylor3098 2 ปีที่แล้ว +4

    great video again your knolwledge on this heavy equipment is really fantastic your father taught you well sir kudos to you and how can you call it work when you have Mr Kevin to company lol keep up the good work

  • @michaelmullins1290
    @michaelmullins1290 ปีที่แล้ว +1

    These videos prove how intelligent Clint is on equipment. To look at that dozer, and know he can make it run, that's amazing. That's why you have a awesome business.

  • @JeffreyStrader
    @JeffreyStrader 2 ปีที่แล้ว +1

    Thank goodness the "Chrome Muffler Bearing' wasn't damaged!

  • @nknatewood8226
    @nknatewood8226 ปีที่แล้ว

    C&C Equipment +: That engine fired-up and ran exceptionally quickly, did it not! Was in near shock, truth be told, as that was certainly _not_ expected! None of the coughing/chugging out clouds of black smoke that normally accompany start-up of an engine which has been sitting idle for years - literally. Thought all you _good-ol' boys_ were gonna spin in circles from disbelief/consternation! The look on the older fellow's face when he hit the ignition and the engine immediately started was simply priceless! Just goes to show what happens when really good mechanics work on good machinery. Things immediately begin to _work_ as they are supposed to.
    W/ regard to the video, another of this channel's typically excellent productions - quite entertaining and _highly_ informative. As is virtually always the case, such videos are afforded the standard _YT_ 'thumbs-up' ree-ward. This video assuredly falls well within that category! As usual, well-done guys! Keep 'em coming! 👏👏👏

  • @jeffmarett321
    @jeffmarett321 ปีที่แล้ว

    I really enjoy watching someone who knows what they are doing. Craftsmanship.!!

  • @apollomoon1
    @apollomoon1 ปีที่แล้ว +1

    Too much fun. I’m jealous!!

  • @charlesdavis189
    @charlesdavis189 8 หลายเดือนก่อน

    You Guy's are great 😃 and I like the fact that you are fixing those Heavy Equipment and making them Safe and great Working Condition and Dependable for selling To people that is wanting Heavy Equipment to keep upgrading there Self employment job's and I know that lot's of the older Equipment is just as good if not better than brand new Equipment because the older Equipment Has already Proved that it can still be Great Machine's !

  • @MySynthDungeon
    @MySynthDungeon 2 ปีที่แล้ว +1

    ya!! Another good Score! Coffees on!!;-)!!Cheers!

  • @kingwood4357
    @kingwood4357 2 ปีที่แล้ว +1

    Another good deal for C&C Equipment, the hits just keep coming. $$ 👍

  • @mikesmith8952
    @mikesmith8952 ปีที่แล้ว

    Clint, I love seeing your auction buy's payoff .

  • @billypelkey4766
    @billypelkey4766 10 หลายเดือนก่อน

    I appreciate watching you and your crew, certainly enjoyable

  • @frankcooper6911
    @frankcooper6911 ปีที่แล้ว

    Busting on Speashle Kevin !! L ol !! It will !! You can do it !!

  • @ronbianchi7545
    @ronbianchi7545 2 ปีที่แล้ว +1

    really like the big JD7 dozers

  • @drgdawson1
    @drgdawson1 ปีที่แล้ว

    Love the old iron and the playful banter. It’s amazing the neglect a diesel will tolerate and still perform.

  • @tjlqk3
    @tjlqk3 ปีที่แล้ว

    That thing lit right off! Can't beat old diesels

  • @whotknots
    @whotknots 2 ปีที่แล้ว +2

    It is impressive how often old, neglected, derelict Cat motors fire straight up with just a bare minimum of caring and sharing.

  • @DaleDirt
    @DaleDirt ปีที่แล้ว

    Not to forget Kevin . He is hilarious and skillful . you guys make great entrainment , Mahalo .

  • @Bman2020
    @Bman2020 ปีที่แล้ว

    It just took a half a turn and BAM she was running got Santa approval too great watch thanks for sharing 👋👍🇨🇦

  • @robertcapetola3986
    @robertcapetola3986 ปีที่แล้ว

    Clint, you have clearly one of the best TH-cam channels ever. I can’t tell you how much I have learned and enjoyed watching your videos on these complex machines these bulldozers don’t take this the wrong way, but I think the quality of your videos would even would be improved even further. If you could just prevent Kevin from speaking, he seems to have some kind of issue with barking out things and calling you Bubba nonstop. Don’t take it the wrong way he’s looks to be a good mechanic but he’s just annoying with the bump comments and the yelling and so forth.

  • @timothybailey7118
    @timothybailey7118 2 ปีที่แล้ว +3

    As a Taxpayer, I’m angry, really angry, how the government abuses misuses and neglects equipment. As a a TH-cam viewer, I’m amazed at 15 yr old iron that starts right up. Great content.

    • @davidcollver6155
      @davidcollver6155 2 ปีที่แล้ว +1

      Caterpillar d7f dozers just Googled. Manufactured between 1969 and 1974. 62 Echo here US Army transportation Fort Eustis 1981 82 83 these dozers were old as Sin then. So the Army got more than their use out of them. So put your anger hat and straighten it up.

    • @timothybailey7118
      @timothybailey7118 ปีที่แล้ว

      @@davidcollver6155 it had 10 hours on it. Ten. That’s 1 more than nine. Watch the videos. Listen. This was manufactured in 2007. This is one of many under 100 hour units Clint has bought that reportedly didn’t operate. Before you presume to bark at someone gets the facts or just keep being like CNN.

    • @dennisholst4322
      @dennisholst4322 ปีที่แล้ว

      @@timothybailey7118 when they first made the 7f wasn't there a problem with the bottom end on those 6 cylinder engines maybe it was crank bearings or new scavenger pumps

  • @64marine
    @64marine 10 หลายเดือนก่อน

    A man I met in Phoenix, AZ had bought a old military warehouse w3ith contents; sight unseedn inside. He found 6-8 large Army dozer's with spares in it. Then he had to move it all ! 1969 Reno, NV a man bought a Jeep from the Army im southern Calif. He was half way home with it when he called the wife. She said to get back there fast as they wanted the other crated Jeep's gone too. All 11 of them. He traded one to a trucker for hauling the load to Reno for him.

  • @ianpumphrey5041
    @ianpumphrey5041 ปีที่แล้ว +1

    Clint, I like the thorough way you review and fix or replace faulty parts/systems. I bet there are many traders who just do the painting part and leave the rest. Cheers from the UK!

  • @kenore4003
    @kenore4003 2 ปีที่แล้ว +2

    Have the Enterprise beam down a couple of anti-grav units. Then you can just pick it up and float it in.

  • @johnroberts8475
    @johnroberts8475 2 ปีที่แล้ว +2

    It's surprising how many of these low hour dozers you get Clint. 👍

  • @jamescole1786
    @jamescole1786 ปีที่แล้ว

    12/17/22. Another A+ on buying, diagnosing & video step-by-step replace & repair/adjust & trial run outside your (quiet & clean) super good shop! Big hydraulic cylinders are next for testing & rebuild & video..including Mr&Mrs SantaClause supervising! LoL! Your quiet & clean shop + your experienced troubleshooting & repairs make your videos a winner! Another great job Clint! Stay safe & carry on!👍👍👍👏⚙️🔩🔧🍺😊

  • @robertconreux8079
    @robertconreux8079 ปีที่แล้ว

    Wow that fork truck is a beast!!

  • @clarkehowardjr.8152
    @clarkehowardjr.8152 ปีที่แล้ว

    Awesome job of bringing this dozer back to life !

  • @wes11bravo
    @wes11bravo ปีที่แล้ว

    That D7 runs like a top!

  • @casycasy5199
    @casycasy5199 2 ปีที่แล้ว

    i loved Santa being all over the dozer.it was cool seeing it fire up so quick

  • @robertpeters9438
    @robertpeters9438 ชั่วโมงที่ผ่านมา

    Maybe you should link a reciprocating saw to the pedals when trying to free them of rust. Haha.

  • @dougyurecko6500
    @dougyurecko6500 2 ปีที่แล้ว +1

    Those 7f bring back so great memories. The old putaway sounds pretty good!!! Wish I had a excuse to add one to the farm fleet. Great video

  • @busterbailey370
    @busterbailey370 2 ปีที่แล้ว +2

    Another great video thank you keep them coming please

  • @barrybickle7992
    @barrybickle7992 ปีที่แล้ว

    Thank you for sharing your work. Fun

  • @douglassmith7515
    @douglassmith7515 2 ปีที่แล้ว +2

    Great job.thanks for the video.

  • @norbertminten
    @norbertminten ปีที่แล้ว

    9:27 hello Clint, I think you are in need for a shopdozer to pull some dead iron. Love your channel, greetings from the Netherlands.

  • @liveuk
    @liveuk 2 ปีที่แล้ว +2

    Would be nice to see the alternater and starter rebuilds too to get the whole story of what put it on the storage pile.

  • @farronmccathern1849
    @farronmccathern1849 ปีที่แล้ว +2

    Great video, these Cat Direct Injection fuel systems made these engines start very easily, if I remember correctly a safety bulletin was issued in the late 80's stating to be sure if the engine was to be turned by hand you must be sure the throttle is in the fuel shut off position to prevent engine starting. BTW I have had one start this way once, it got pretty exciting for a few seconds!

  • @russellgnuse
    @russellgnuse ปีที่แล้ว +1

    You guys are a treat to watch .love the Santa Claus .no more fuel in the oil? To everyone there Merry Christmas

  • @pmiller7886
    @pmiller7886 ปีที่แล้ว

    Enjoy every one of your videos Clint, real nice to see your pop on screen. I bet he's a real character.

  • @ToddBigelow-zg6vs
    @ToddBigelow-zg6vs ปีที่แล้ว

    Keep on keepin it real!!! Very refreshing!👍

  • @kiddlawncare2933
    @kiddlawncare2933 ปีที่แล้ว

    That move at the beginning really told me how smart/patient you are. Most guys would keep jerking on the chain possibly breaking it and taking out whatever is in the way. I see you have enough experience to think about what is happening and how to fix it by adding weight. Genius move there.

  • @coolhanddruid
    @coolhanddruid ปีที่แล้ว

    Its a good thing you ladies had a strap to hold that starter.

  • @chipmccoy5077
    @chipmccoy5077 ปีที่แล้ว +2

    Thanks Clint for another great video. The old D7's are great old machines. Looking forward to more videos. Hoping all have a Merry Christmas 🎅 🎄.

  • @bobbg9041
    @bobbg9041 ปีที่แล้ว

    You need a big Jib crain to pick these up off flatbed trucks with just drive under with the tractor trailer lift it off drive the truck away set it down then move it might even be cool to drop it in the shop to fix, then drive it out ready.

  • @benschlack5814
    @benschlack5814 ปีที่แล้ว

    I'm checking out all your videos ,yes sir