EVOTECH CRASH SLIDERS INSTALL | HONDA CBR650R (ENGINE SLIDERS & SPINDLE)

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 61

  • @alexserna5394
    @alexserna5394 2 ปีที่แล้ว +9

    I really like how you work. I have the same sliders, I too think these are the best ones in the market right now. Just wanted to point out one detail that may be wrong: I think the back bolts should be at 49 nm, and the ones in the front should be at 59 nm. This is how it is specified in the service manual.
    Other than that, I really liked your video and your work, I'm definitely suscribing.

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +4

      Much appreciated mate! Thank you 🙏🏼 they’re honestly the best quality sliders on the market. I did a lot of research before buying them!
      That’s very interesting to hear thank you, I’ll certainly double check and amend if needed. I found the Toque settings on a CBR650R website, all shown in a table.
      Thank you 😎

    • @r2d2aa
      @r2d2aa ปีที่แล้ว

      @@AutoBay Thanks for the manual! But it looks like 49 Nm rear screw and 59 Nm front (if I understand this diagram correctly). You showed your work very clearly,
      It will make it very easy for me to mount my own, I chose puig but the principle is the same.I wanted to put a link to the page but youtube won't allow it. There is a diagram on this page.....bikesinfotech,,,

    • @HP-cc8tt
      @HP-cc8tt ปีที่แล้ว

      gi

  • @RealSykes
    @RealSykes 7 หลายเดือนก่อน

    Thank you for putting this together! Followed along on my CB650R, wasn't all that bad. But the horn gave me a hard time.

  • @baldvale5418
    @baldvale5418 ปีที่แล้ว +1

    What a stonking bike , she's lucky to have you : )

    • @AutoBay
      @AutoBay  ปีที่แล้ว +1

      Thanks very much! She certainly is 😉

  • @michaelsalice9952
    @michaelsalice9952 ปีที่แล้ว +2

    At 9:03, Don't EVER break a bolt loose with the open end of a wrench!!!!! Use the Box end!!!!!

    • @AutoBay
      @AutoBay  ปีที่แล้ว

      I do see your point mate, more coverage around the head of the bolt, less chance of it slipping off/rounding the head/snapping the spanner.
      Yet the torque on these bolts weren’t high enough for it to be a concern for me using the open end.
      Appreciate your comment nevertheless 👌🏼

  • @rogerpriestwell6379
    @rogerpriestwell6379 10 หลายเดือนก่อน +1

    Hello, quick question, does the frame sliders mount on the frames on both sides or it mounts to the engine case in some places.

  • @mitchellsharp2340
    @mitchellsharp2340 ปีที่แล้ว +2

    Thank you so much for this vid 😭 I was getting so mad this vid helped so much HAHAHA

    • @AutoBay
      @AutoBay  ปีที่แล้ว +1

      No worries bro 🤣 glad this helped 🙏🏼🔥

  • @ADV-IT
    @ADV-IT ปีที่แล้ว

    Does frame slider sticks out from left and right equally?
    Installed them today on my CBR, and it looks like from one side it sticks out for 4.5cm, from another 5.5cm.

  • @BleachDemon99
    @BleachDemon99 14 วันที่ผ่านมา

    Thank you for this video, you make that bike look like a 125 😂

  • @alex41694
    @alex41694 2 ปีที่แล้ว +2

    Hey, I loved your video, and it made me buy those! I mounted them today and I love them, but... I have one part left over. It's one of the two small diameter shiny spacers. Like the one you install at 10:23 in the video. You also have two, but I can only see you use one. Do you know where the other one goes?

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +4

      Thanks very much mate! I know exactly which piece you mean, this part must be a spare. As I have not used it either. I double checked all of the official Evotech instruction manual and it was not used, it must be a spare 👌🏼

    • @alex41694
      @alex41694 2 ปีที่แล้ว

      @@AutoBay thanks mate, that's what I thought, but I just wanted to make sure. Your video was very helpful

  • @crazy.visualz8216
    @crazy.visualz8216 5 วันที่ผ่านมา

    Would this sliders work with the new 2924 e clutch ?

  • @worldworldworld1009
    @worldworldworld1009 ปีที่แล้ว

    Hey bro. Just wanted to say thanks for going through this. I've just installed the same sliders, tail tidy and one bar end. I say one bar end because I can't get the left one off! If you've already put your bar ends on do you remember if the left one loosens by turning counter clockwise (left)?

  • @xB0RNFR0MPAINx
    @xB0RNFR0MPAINx 2 ปีที่แล้ว +1

    Thanks dude will be installing these tmw.

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +1

      I’m glad this helped mate!

  • @Zeeverythingchannel
    @Zeeverythingchannel 11 หลายเดือนก่อน

    From where did u got the torque settings? Do they come with the installation notice ?

  • @Jake-si9ih
    @Jake-si9ih 8 หลายเดือนก่อน +1

    Hi where did you get the torque specs from? Haynes manual says the front bolts are held in with 59nm

    • @VVBJ0
      @VVBJ0 5 หลายเดือนก่อน

      Same, i've got 59 on the front ends and 49 on the back ends

  • @james1280
    @james1280 ปีที่แล้ว

    Did you have an extra small spacer at 10:25 ? Ive only got a small and large one in my kit. Dont think you used it in this video either.

  • @Maferto
    @Maferto ปีที่แล้ว +1

    Good job. Greetings from Spain

    • @AutoBay
      @AutoBay  ปีที่แล้ว

      Thank you 🙏🏼

  • @tvtwistasmoto
    @tvtwistasmoto 2 ปีที่แล้ว +3

    Yeah you are right, I have the R&G sliders and the evo tech is better. Great vid, I might have to grab that front spindle too.

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +2

      R&G are still great of course! But I just feel like more time and money was spent designing the Evotech sliders, I love how there’s 2 fixing points on the chassis rather the 1. The spindle is definitely worth the money 😎 thanks a lot mate much appreciated!

    • @tvtwistasmoto
      @tvtwistasmoto 2 ปีที่แล้ว +1

      @@AutoBay Yeah I agree

  • @hlpang1075
    @hlpang1075 5 หลายเดือนก่อน +1

    Thats a nice box of tools. Who makes them?

    • @AutoBay
      @AutoBay  5 หลายเดือนก่อน +1

      The socket set is from Halfords 👌🏼

  • @MemewVlogs
    @MemewVlogs ปีที่แล้ว +2

    Where did you get the torque for each bolts mate?

    • @AutoBay
      @AutoBay  11 หลายเดือนก่อน

      Forums/owners manual pal

  • @ezrafabian9868
    @ezrafabian9868 2 ปีที่แล้ว +3

    Hi do the sliders come with the tools to install?

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +1

      Unfortunately not mate. I highly recommend investing in a decent socket set which includes Allen keys

  • @nik-pm9pq
    @nik-pm9pq ปีที่แล้ว

    Are these going to do real work if the bike will drop down?

  • @MarcelBundschu
    @MarcelBundschu 8 หลายเดือนก่อน

    what year of manufacture is it?

  • @cormactimms6246
    @cormactimms6246 5 หลายเดือนก่อน +1

    Did you do all of this on the side stand?

    • @AutoBay
      @AutoBay  5 หลายเดือนก่อน

      Yes mate, i didn’t own a paddock stand at the time

  • @SouthCambsRider
    @SouthCambsRider ปีที่แล้ว

    Do you need to loctite the bolts?

  • @Trey_Powell
    @Trey_Powell 5 หลายเดือนก่อน +1

    Do this mount to the frame or the engine?

    • @AutoBay
      @AutoBay  5 หลายเดือนก่อน +1

      To the frame mate

  • @speedyrules7
    @speedyrules7 ปีที่แล้ว

    Are these the same for the cb650r I been looking online and they don't have the bracket like your ones and I prefer multi point of contact ones? Thanks

  • @shandhirani7559
    @shandhirani7559 10 หลายเดือนก่อน

    Lavley!! 👍🏽

  • @willkent7998
    @willkent7998 9 หลายเดือนก่อน

    the crash bobbin on the side with the horn i had to grind 1mm off the spacer as it would not fit no way i tried everything so i took 1mm off and just got it to fit

  • @BIKE_CB
    @BIKE_CB 6 หลายเดือนก่อน

    謝謝☺️

  • @davidbernardino7657
    @davidbernardino7657 ปีที่แล้ว

    Where can I buy them?

  • @whiskeywiseguy9976
    @whiskeywiseguy9976 ปีที่แล้ว

    Anybody know if these will fit a 650F model?? Similar body but id be pissed if it didn't fir

  • @Daniel.echeverria.musica
    @Daniel.echeverria.musica 2 ปีที่แล้ว +1

    I noticed there is an extra spacer (small ones)

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +1

      I had the same mate, seems like everyone does!!

    • @Srkn287
      @Srkn287 ปีที่แล้ว +1

      Why is There two small Space for what? Does someone Know ?

  • @thegamingflow6072
    @thegamingflow6072 ปีที่แล้ว

    Hi mate i aint got a torque wrench just normal, should i go install it anyways if not what was the NM for the bolt and did u use any locktight

  • @MustafaDagdelen
    @MustafaDagdelen ปีที่แล้ว

    I bought it, I hope I can do it.

  • @FTRHOODFRESH8984
    @FTRHOODFRESH8984 2 ปีที่แล้ว +3

    Broooooo you paid over 200 dollars for these!!!!!! Tf I got mine for 90 bucks

    • @AutoBay
      @AutoBay  2 ปีที่แล้ว +1

      I paid £200 bro, are yours evotech??

    • @FTRHOODFRESH8984
      @FTRHOODFRESH8984 2 ปีที่แล้ว

      @@AutoBay yes sir, the exact same brother. I'll send u a pik if u wanna see and a recipe, I got them today and was searching installs and found u. Thank u for such a awesome detailed installation

    • @michu_majkel
      @michu_majkel ปีที่แล้ว

      @@FTRHOODFRESH8984where you bought them ?

    • @ag4103
      @ag4103 ปีที่แล้ว +1

      there are plenty of knock offs

    • @mightyakkylex
      @mightyakkylex 9 หลายเดือนก่อน +1

      I'd rather pay the full 200 and get the real deal ngl