Great Planes Dynaflite Series Super Decathlon Maiden Flight DLE30

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 มี.ค. 2023
  • In this video I take you on the conclusion of the Great Planes Dynaflite Series Super Decathlon build series ending it with this maiden flight. I start of the video with a quick look at the finished build and then into a quick control throw set up, followed by a quick engine running and smoke test. Then we get into the actual maiden day of the video. As a bonus I added at the end my 2009 Great Planes Dynaflite Series Super Decathlon build and maiden, a 14 year old video footage. So sit back relax and enjoy this maiden flight video of Dynaflite Super Decathlon powered by a DLE30cc gas engine 32:1 oil/gas mix.
    Great Planes Dynaflite Series Kit 89" Wingspan
    Powered by a DLE30cc gas engine 32:1 gas oil mix 14oz tank
    Sullivan Skywriter Smoke Pump
    Hitec HV servos all around
    3" Great Planes Aluminum Spinner
    Covered in Top Flite Monokote Orange, White, gloss black, Flat Black
    Paint used for cowl and wheel pants Krylon gloss Popsicle Orange, White, Black
    Finish 1 Overall Clearcoat sprayed over Krylon with 614 activator
    Dry weight before CG 16.8Lbs
    Total nose weight added to balance at CG 3-3/8" from leading edge 1.4Lbs
    Total overall dry weight 18.2Lbs
  • บันเทิง

ความคิดเห็น • 44

  • @barqwoof
    @barqwoof ปีที่แล้ว +1

    Well done! Looks like a keeper. Our local posse member Sam, has flown a smaller OMPHobby Super Decathlon revealing the same elegant manners. Jim

  • @jeremykg1569
    @jeremykg1569 11 หลายเดือนก่อน +1

    Top notch build came out fantastic. Thank you for sharing your craft.

    • @BayonasRCWorld
      @BayonasRCWorld  11 หลายเดือนก่อน

      Thank you for watching my video.

  • @hughobrien4139
    @hughobrien4139 3 หลายเดือนก่อน +1

    I like the color scheme. Very nice !

  • @mrbigg7255
    @mrbigg7255 ปีที่แล้ว +1

    Gorgeous plane!!!
    Haven’t had a chance to watch the build videos but I will soon.

  • @andriy1000
    @andriy1000 6 หลายเดือนก่อน +1

    That's a nice-looking aircraft
    Congratulations!

    • @BayonasRCWorld
      @BayonasRCWorld  6 หลายเดือนก่อน

      Much appreciated 🙏

  • @scotabot7826
    @scotabot7826 ปีที่แล้ว +1

    Beautiful covering job, love the scheme as it's a classic. Your model is wayyyy... overpowered!! No highspeed fullpower dives with a super hard pull at the bottom, as you might pull a wing offf of it.

    • @BayonasRCWorld
      @BayonasRCWorld  ปีที่แล้ว

      Yeah exactly! However powered with just a DLE30 compared to many whom say it is under powered and telling me to install a DLE55. I think a DLE30 is more than enough power for this plane. If trying to fly it scale then one could even go with a 28cc or 26cc gas engine.

    • @davidthompson5710
      @davidthompson5710 10 หลายเดือนก่อน

      I put a pte 36 on mine. No issues. Great flying plane. Horizon needs to run kits.

  • @ericchild8845
    @ericchild8845 8 หลายเดือนก่อน

    On my birthday, no less! Sweet!

  • @J3Flyah
    @J3Flyah ปีที่แล้ว +2

    Nice job overall Mike!

  • @flyboywbl
    @flyboywbl ปีที่แล้ว +1

    You really did a wonderful job! So nice

  • @michaelgallant7615
    @michaelgallant7615 ปีที่แล้ว +1

    Good stuff congrats on first flight...

  • @sorenwolff4954
    @sorenwolff4954 ปีที่แล้ว +1

    As always, an exceptional build produces an exceptional maiden! Beautiful build! the original is outstanding as well.

  • @Renniks74
    @Renniks74 9 หลายเดือนก่อน +1

    I was able to find one of these kits! I'll definitely be watching your build videos a few more times lol

    • @BayonasRCWorld
      @BayonasRCWorld  9 หลายเดือนก่อน +1

      So awesome! Have any questions don't hesitate to message me.

    • @Renniks74
      @Renniks74 8 หลายเดือนก่อน +1

      @@BayonasRCWorld Actually I do have a question. How did you get the dimensions for the door? Or did you do it freehand? And what tool did you use to cut it out? Sory that was 3 questions haha

    • @BayonasRCWorld
      @BayonasRCWorld  8 หลายเดือนก่อน +1

      For the door I just referenced some online photos of the real Decathlon and made close measurements and went from there. I cut my door out slowly with a new 11 blade and a metal ruler and went around the drawn outline that I did until I had cut through. I did mot use a dremel wheel only because it will remove more material and I did not want to chance anything since I only have one shot to make the cut right.

    • @BayonasRCWorld
      @BayonasRCWorld  8 หลายเดือนก่อน +1

      ​@@Renniks74I can get my measurements off my door and fuselage and provide you with it here. Give me about an hour and when I get in my shop I will get those measurements for ya

    • @BayonasRCWorld
      @BayonasRCWorld  8 หลายเดือนก่อน +1

      Checkout my Bayona's RC World Facebook group for more photos and info regarding the door measurements. Here is my link to the group.
      facebook.com/groups/1102320606822541/?ref=share

  • @Bdj_jdk
    @Bdj_jdk ปีที่แล้ว +1

    Guam's finest!!

  • @helischorsch9786
    @helischorsch9786 ปีที่แล้ว +1

    Looks like a real fun airplane 👍👍…outstanding finish on this plane 👏cheers from Munich 🍺

  • @ronsnipes5258
    @ronsnipes5258 ปีที่แล้ว +1

    Awesome!

  • @user-rx8qq8sk9ydv1ce5ib
    @user-rx8qq8sk9ydv1ce5ib 5 หลายเดือนก่อน +1

    Awesome . Wished you had shown installation of the engine. I am not sure which built series you shows that. Thanks

    • @BayonasRCWorld
      @BayonasRCWorld  5 หลายเดือนก่อน +1

      Unfortunately I did not show the installation of the DLE30. I however got photos of the DLE55RA that I installed later on and also videos of the flights. The photos are found on Bayona's RC World Facebook group here is the link. facebook.com/groups/1102320606822541/?ref=share

    • @BayonasRCWorld
      @BayonasRCWorld  5 หลายเดือนก่อน +1

      The flights videos are found on the youtube channel

    • @user-rx8qq8sk9ydv1ce5ib
      @user-rx8qq8sk9ydv1ce5ib 5 หลายเดือนก่อน +1

      @@BayonasRCWorld thanks a lot 👌

  • @kevinskinner431
    @kevinskinner431 2 หลายเดือนก่อน +1

    Got another question for you. Are the wings one piece or 2? I don’t see any instructions to join the wings at any point but is it structurally sound enough with a 2 piece wing?

    • @BayonasRCWorld
      @BayonasRCWorld  2 หลายเดือนก่อน

      Yes it is a 2 piece wing.

  • @davidthompson5710
    @davidthompson5710 10 หลายเดือนก่อน

    I'm still so very irritated that horizon abandoned all the great planes and dynaflite stuff.