HOW TO ACTUALLY INSTALL CAMRY FOG-LIGHTS/DRL *DETAILED*
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- INSTA FOR ANY QUESTIONS is: SIKH.TRD
I think I have a pretty solid video on how to install both the top foglights and the bottom foglights. I show it to where u don’t fuse tap anything and only cut some wires and use heat shrink in place.
#car #foglights #camry #camryfoglights #trd #cars #toyota #toyotacamry #racing #loud #direct
#lakers
Top Fog light: 0:49
Bottom Fog light 3:45
Final result 6:45
At night 8:34
Thank you for this. Even I know my video from two years ago is shitty compared to what i know now. Just never had a chance to remake a better one. Until I do I will definitely refer people to this video. Good work man
Appreciate it man!
AYYY ITS THET ONE TH-camR GUY
@@SeanKing0109 😎
I spliced the red wire into the pink wire which is regular headlight
I spliced the green wire into the blue wire which is my high beam. Into driver side headlight
Instead of splicing, you can simply just pull the pin out of the connector housing ,wrap the wire around it, and push it back in the connector housing.
Nice install. I hate to be that guy but I think the fog light switch you put it upside down. The light bar should be at the top. For OEM functionality. connecting to the tail lights fuse is better than cigar fuse. However this is 10A not 15A. So you can leave the lights in auto and the fog lights will turn on and off automatically. The downside is that the tail lights should be on for the switch to work and won't work if your lights are off. I have it like this so I don't have to worry about my fog lights being left on or having to remind myself to turn them on every time.
Good job. Glad you were successful and as we know that light projected lower on the road when there is fog is best. Some people think High Beams will cut through the Fog but only make visibility worst. Low beams with Fog Lamps On. Too bad that the fog lamp wiring to the switch had to be a pain and messy to get to back of the firewall and through. Get a chance use electrical tape and some wire ties. Where did you pick up the switch?
And this was done on your trd correct?? Cause I have a trd as well and I’m wanting to install fog lights like these as well
The information was really helpful and it looks dope as well
Yes everything works and it’s the best way to install these because splicing into a wire is better then running it through a fuse box because the lights will stay on since the fuse box will always have power
@@tarun_not bad ass thanks for that info brother, car looks dope by the way
I got the same ones and after installing the fog lights don’t work and the driver side accent light dims and flickers and the passenger works like it should. Unplugged the driver side and plugged it into the passenger it work like it should. Any idea what might be wrong?
Just bought the same ones you have, hopefully I can install them right
Good luck man, it’s actually pretty simple don’t overthink yourself!
this was helpful and I bought the same ones you have, question what if I don’t want the blue or turning signal so I still follow as you showed?
As long as the other wires are connected they should run
How are these fog lights quality are they good ? And also how long do they typically last, final question where did you get them from
@@sebastianserrano9548 Great Questions! 1. The quality is honestly pretty good and they are water proof so far and work great. I’m not sure how long the time for them to last really is I’ve had them for like a year now. Also I got them from HiRevsports.com
Where did you get yours from? I bought mine from Amazon and the on/off switch looks so cheap, and it's not like the other buttons..
@@matheushipolito3933 I bought mine on Hirevsports website
@@tarun_notNice! Did it come with that turn on/off button you showed on 6:55? Or you had to buy that separately?
@@matheushipolito3933it came with it
where did you get the fog lights
Just Curious you wouldn't know if the wiring harness color code is the same for the xse as for the trd shown in the vid for the headlights?
Honestly I had run into the same issue and I work at a dealership in the back so I had tried pulling up TrD camry headlight wiring diagram but it’s different for almost every model of the Camry
So what I ended up doing was using a multimeter and putting the negative prong on the negative part of the battery, and used the positive prong and stuck it into the headlight port that has the holes in it and turned my headlights on and off to see which one had power and which wire didn’t
I installed mine . I keep smelling burnt smell from drl module driver that powers drl lights. Is that normal lights are working fine.
Ummm, I don’t have any burning smells so I’m not sure if that is normal or not
Hi, I'm trying to install the same foglights on a 2019 Camry. I want to cut off the foglights power when the high beam is on. Do you know how I locate the high beam power source? My Camry came with a Bi-led headlights.
Only way to check is using a multi meter to the the holes in the wiring harness that is connected to the bulb or led light
Other then that I wouldn’t know tbh
@@tarun_not The challenge is that there are just 2 relays and 2 fuses for the headlights, but they function for both low and high beams.
Yea that’s a tuff one I unfortunately don’t have those type of headlight harness might have to pull up a diagram or something
Does anyone know where I can get these exact lights (DRL + fog) for cheaper
There was no mention on their site if they would be compatible with 2021/2022 Camry TRDs. Sadly.
All TRd’s are the same model the years don’t change the fitting
Where did you connect the negative wire through the fire wall?🤔
To one of the bolts
I couldn’t find the headlight harness to connect the low and high beams. Could you help
The headlight harness is right next to the turn single
@@tarun_not i’m pretty i knew where it was. I think i had different colors then you. I have a SE
@@Awsometiger1011 I put these in a 2018 XSE. I Unplugged the headlight and turned on the turn signals and measured voltage on the pins in the plug with a multimeter. The turn signal flashes super fast when it's unplugged so the voltage will just rapidly blink without giving a voltage reading but when you see that you know you have the right wire.
Will this work the same way for 2020 Toyota Camry SE?
As long as the housing for the drl light is the same yessir!
Hi that's any one had problems after installing this lights my car won't start so I don't know what's wrong any idea any thoughts?
Did u disconnect the battery?
@@tarun_not not I did not previously to install but had the problem i did I still had no luck
Mine dont have any extra blue or green wires to connect👀
They probably updated the drls cause I have had these for 2 years now, but then it should make your install easier
Same.. No blue or green and it comes with its own switch for the fogs. It doesn't run into the factory panel. I installed everything but just have to wire it up. Left it for another day because I wanted to research it. The instructions are terrible and there's nothing on the internet that I found with proper explanation.
What brand are those lights ??
I’m not sure of the brand but I got them off Hirevsports.com
I got the same ones and after installing the fog lights don’t work and the driver side accent light dims and flickers and the passenger works like it should. Unplugged the driver side and plugged it into the passenger it work like it should. Any idea what might be wrong?
Honestly if that’s the issue, the wiring might just be bad from factory, should let the people know who you bought the lights from that the wiring is messed up.
And they should send you a new set back!