Good to see you making videos Hector. One other thing I would suggest is to do a confirmation test of the lights before installing the front end. I’ve been in a couple situations where a ground wasn’t sufficient or I didn’t have a clip fully inserted and had to undo hours worth of work.
Great video. Like how to get to the point straight up and show everything quickly. Not like most other youtuber's out there explaining their whole damn life just changing oil.
OMG - I finally figured out why Hektor starts out every video with some guy yelling his name twice! I was just watching the movie "Troy" and there's a scene where Achilles (Brad Pitt) drives up to the walls of Troy, gets off his chariot and yells, "Hektor!!! Hektor!!!". (Basically calling Hektor out.) Now it all makes sense! Hektor's meeting the challenge every single video he does. :)
Good info Hektor. The last time I installed driving lights on a car was back in 1988, it was on my '84 Mazda 626. They made the car look more sporty. Being a teenager and not having internet then I wired those suckers right in to the battery with a toggle switch. Well after about 30 minutes of use and the switch going into nuclear meltdown I discovered what a relay was and how to use it! Haha Guess you could say I learned the old fashioned way Take care -Glen
this helped a lot thank you so much i hope i can finish my fog lights now i just wish you did a bit more video of showing how to tell what wires are what
Hi, I have a 2015 Toyota Sienna LE. I bought the Spec D fog lights, on this brand the red power cable connects inside the cabin instead of the engine compartment. I need help to find that green wire you are talking about that only has power when you turn the light to auto or on. I could not make it out from your video because the camera was too far.
Of all the fog light install videos I was checking out. Yours best, other videos talk about all this other shit, yours was direct, and your work is practical and neat. 👍🏽to the Homie Hektor
Bien Hecho! Thank you for emphasizing the professional, small things. I'll be waiting for warm weather to start this work and it's a great feeling to know I can fall back to your video if I hit a snag. Gracias. Agradesco mucho.
I only replaced them by the yellow color. I have also replaced the whole bumper with the grille with the silver color. I don't connect the lights yet for now. I will do that after as another step.
Hey hector can you focus or please share a picture of the wire you connect the power inside i just pass the last 3 hours trying to install my fog ligths on my 2018 le siena too
Hector, where is your shop? Can you install for my 2020 Sienna LE? Everything same with the 2019 that you just did. I want an Amber Lens color for my fog. Any brand recommendation for the housing?
Hey homie, love the video, I called some things “chingadera” too! 😂 I am doing my own fog lights on a 2011 Camry, I install the lights but I am struggling on the wiring don’t know what to put where, you think I can look up a wiring diagram?I want to do them like you did that they can only be turn on when the headlights or parking lights are on, I don’t want to use the wiring as it came in, the little light on the switch will be always on and I can leave them on if I forget about them.
Hector mi Sienna ya vino con las Fog lights pero yo quiero encenderlas individualmente sin tener que encender las headlights cómo puedo hacerlo te lo agradecería saludos excelente trabajo !
I believe on my 06 Sienna that it was prewired for fog lights. The only missing components would be the lights themselves , the relay and light switch assembly on steering column. So the 2019 isn't prewired?
Does your fog light switch back light stays on when the vehicle is not running or lock, mine stays on all the time, do you think is there something wrong the way I install it?
haga un video de una toyota sienna le 2006, la mia ya traer los cables y le puse los bombillos pero no da luz, le camnie a relay nuevo y toda pero aun no le pasa corriente a los sockets y arnest que trae
I hook everything up I got power to the relay to the switch I went to the two sockets at the fog lights and I have very dim power need help thank you the lights are not working
Very professional job!! I have a 2019 prius that I'd like to install LED's in bumper similar area u jst did. 2016/17 had a triangle black area. Mine is long straight. Wished I lived in CA, you'd get my business! Alot of prii's in CA & no fogs or LED's . Little round fogs can go in grill but I want LED's . Not sure if I could make it look original on dash too! I sub'd u, I like the way u work!
Homie, why would you terminate the hot wire to the starter hot and not into the relay power box constant hot? I'm not going to knock your install except for the T-splice connector ( I dislike the T-splices). Myself I always try to install everything to a factory wire diagrams. This is just how I was taught. BTW I really like all you videos, keep it up!
Hey man, quick question for you. Are you able to make a tutorial on finding the cable to connect on the inside for the power? Also.. Lol I think I did something wrong because my daytime lights and taillights don't turn on anymore. Any suggestions?
Hector I need your help. I put the “Ignition wire” to the 12v battery and it DID NOT WORK. Because I called the customer service of Winjet and they said connect the red “Ignition wire” to any 12V power supply. The light did not turn on but the switch kept on light. DID I BUSTED THE RELAY and the entire system? I did not try to connect it to the ignition yet because I run out of time I need to go to work. I just want to ask your input first about this matter. Thank you
Homie Hektor hector I connected everything and put it in 12V and I got no light. But the switch kept on having light on... Then my sienna did not start when I tried. Then I got engine light on... The traction sensor kept o saying “off”... Then I uninstalled everything and then engine light went away. This is for WINJET brand. I am thinking to try the SPYDER BRAND and will put the component connector to the component. I hope this time it will work...
bro any video on the firewall part? how did you put the connector for the switch from engine bay to the inside of the van(vise versa)? did you cut the harness and just connect them back together?
Homie Hektor i see. did u seal it back up after slicing the grommet? or will it be ok and not leak like that in the inside if ever it rains or car washing?
Homie Hektor one more thing that i can’t figure out with that red wire u tapped at that green wire did u cut that wire from the switch going to the relay? i did installed mine but did not do the wire tapping at that green wire you spliced under the steering wheel so now even i turned off the van my switch still illuminating.
My wires weren't long enough 😩. Everything worked fine until I put hid headlights now they won't come on it's like they're not getting enough voltage when headlights are on.🤷♂️
nice to see a fella genuinely trying to help folks
Best video I have seen for step by step for aftermarket fog lights. Made my install easy. Good work.
That’s dope 🤝 thanks for subscribing
Good to see you making videos Hector. One other thing I would suggest is to do a confirmation test of the lights before installing the front end. I’ve been in a couple situations where a ground wasn’t sufficient or I didn’t have a clip fully inserted and had to undo hours worth of work.
Great video. Like how to get to the point straight up and show everything quickly. Not like most other youtuber's out there explaining their whole damn life just changing oil.
OMG - I finally figured out why Hektor starts out every video with some guy yelling his name twice! I was just watching the movie "Troy" and there's a scene where Achilles (Brad Pitt) drives up to the walls of Troy, gets off his chariot and yells, "Hektor!!! Hektor!!!". (Basically calling Hektor out.) Now it all makes sense! Hektor's meeting the challenge every single video he does. :)
😎
Good info Hektor. The last time I installed driving lights on a car was back in 1988, it was on my '84 Mazda 626. They made the car look more sporty. Being a teenager and not having internet then I wired those suckers right in to the battery with a toggle switch. Well after about 30 minutes of use and the switch going into nuclear meltdown I discovered what a relay was and how to use it! Haha Guess you could say I learned the old fashioned way Take care -Glen
Ozzstar's Cars Live and Learn 🤙🏼
Super helpful video man, thank you. Installing mine this weekend!
this helped a lot thank you so much i hope i can finish my fog lights now i just wish you did a bit more video of showing how to tell what wires are what
You make it very clear, and this vid is worth sharing with people who need to install fog lights. 👍🔥🔥
Autoolsee store Appreciate that, Gracias 🙏🏼
How many top professionals going to said omg he is using zip ties 😱😱😱😱
😅😅😅😅😅😅
Nice work I bet is going to have better view at night
"Let's remove this front bumper chingadera" Esa estuvo buena. I laugh at that one
Hi, I have a 2015 Toyota Sienna LE. I bought the Spec D fog lights, on this brand the red power cable connects inside the cabin instead of the engine compartment. I need help to find that green wire you are talking about that only has power when you turn the light to auto or on. I could not make it out from your video because the camera was too far.
Great job Hector! Good to see you again. You and your family stay safe....
awesome install man! Just did this to my toyota rav4 since it was the base model it didnt have fog lights
Of all the fog light install videos I was checking out. Yours best, other videos talk about all this other shit, yours was direct, and your work is practical and neat. 👍🏽to the Homie Hektor
Nice Hecktor. Working from home has it's advantages and I hope your doing well.
wyattoneable it’s way better this way. 🏡🍻
It was about time to see you back in action guey. 👍🏻
Thanks for the video Hector. Have a great weekend
I love your videos man, real good quality and entertaining to watch homie. keep it up !
Bien Hecho! Thank you for emphasizing the professional, small things. I'll be waiting for warm weather to start this work and it's a great feeling to know I can fall back to your video if I hit a snag. Gracias. Agradesco mucho.
I only replaced them by the yellow color. I have also replaced the whole bumper with the grille with the silver color. I don't connect the lights yet for now. I will do that after as another step.
Thank you sir ,the best install information ever.
Thanks brother very detailed info I'm saving the video
Great job. Very informative video. Thanks
Great work, definitely looks professional and clean homes 👍
Good job man. Super clean.
Bien trabajo Héctor, saludos desde Dallas Tx
Bendiciones para ti y tú familia,
AARREELLYY LLUUNNAA Gracias 🙏🏼
You do good work Homie. I wish I nad you as my neighbor!
Good going #HomieHektor 👨🔧👍
Enjoyed this. You do great work Homie!
Hi i like your videos keep it up..i am from srilanka..
Que Chingon. This video helped out a lot.
You should explain which wire to connect that under that dash.
Hey im trying to rewire up a set of midfied fog lights they are led like lighting wondering how to properly do it without messing anything up
Hey hector can you focus or please share a picture of the wire you connect the power inside i just pass the last 3 hours trying to install my fog ligths on my 2018 le siena too
Excellent video dude...
Hector, where is your shop? Can you install for my 2020 Sienna LE? Everything same with the 2019 that you just did. I want an Amber Lens color for my fog. Any brand recommendation for the housing?
I don’t have a shop I work from home I’m in California
Hey homie, love the video, I called some things “chingadera” too! 😂 I am doing my own fog lights on a 2011 Camry, I install the lights but I am struggling on the wiring don’t know what to put where, you think I can look up a wiring diagram?I want to do them like you did that they can only be turn on when the headlights or parking lights are on, I don’t want to use the wiring as it came in, the little light on the switch will be always on and I can leave them on if I forget about them.
Hector mi Sienna ya vino con las Fog lights pero yo quiero encenderlas individualmente sin tener que encender las headlights cómo puedo hacerlo te lo agradecería saludos excelente trabajo !
Hey Hector , can the red wire be connect to the parklight wires instead of the fuse ?
I believe on my 06 Sienna that it was prewired for fog lights. The only missing components would be the lights themselves , the relay and light switch assembly on steering column. So the 2019 isn't prewired?
if you have to replace the fog light(s), do you need to remove the whole bump cover again? is there any easy way?
Where is the link for the fog lights?
And nice video🔥⚡️
Do a how to use the alignment machine for beginners. Please I'm interested.
Appreciate it brother 🙏🙏
Great Job man. Very informative video. Keep up the good work.
Damn I wish you lived in Philly Bro. That was an awesome video. Thanks 👍
California ☀️
Awesome work, very well explained!
Great job! Thank you bro!
Good job bro
How were you testing the wires with the probe? Did it have a sharp end to pierce through the wire plastic cover ? Or was it induction/magnetic type?
Call your channel HetorFix lol. Great work!
Should I start it with “Hey guys HektorFix here”... 😁
Does your fog light switch back light stays on when the vehicle is not running or lock, mine stays on all the time, do you think is there something wrong the way I install it?
haga un video de una toyota sienna le 2006, la mia ya traer los cables y le puse los bombillos pero no da luz, le camnie a relay nuevo y toda pero aun no le pasa corriente a los sockets y arnest que trae
Is it pretty similar for a 2017 Toyota Sienna ?
Just wondering. How its going without a job. Have you found anything ?
I hook everything up I got power to the relay to the switch I went to the two sockets at the fog lights and I have very dim power need help thank you the lights are not working
Oh very nice I’m gonna do my car 🌹
Great tutorial thanks for uploading, im sub to your channel
Gracias, hope it helps
Instead of putting the positive to the starter kit, can I just connect it directly to the battery? Thanks!
👍🏼yes you can, mostly everyone goes to the battery.
Hay bendito cuanta cosa
@@serrata1976 no es mucho 👍🏼
Very professional job!! I have a 2019 prius that I'd like to install LED's in bumper similar area u jst did. 2016/17 had a triangle black area. Mine is long straight. Wished I lived in CA, you'd get my business! Alot of prii's in CA & no fogs or LED's . Little round fogs can go in grill but I want LED's . Not sure if I could make it look original on dash too! I sub'd u, I like the way u work!
Youre cool. And nice. And smart. Imma subscribe 💯
So when the parking lights come on when you unlock the car the fog lights will come on?
No, that comes from the module. I wired from the head light switch 🤙🏼
@Hektor Sienna 2016 where should the ignition power switch cable should be located at ? or anyone that have done it ? Sienna 2016 LE.
Great video
Excelente video, Pero una oregunta: Seria posible pasar el arnes por donde pasa el cabe chicote que abre el cofre?. Saludos!
Homie, why would you terminate the hot wire to the starter hot and not into the relay power box constant hot? I'm not going to knock your install except for the T-splice connector ( I dislike the T-splices). Myself I always try to install everything to a factory wire diagrams. This is just how I was taught. BTW I really like all you videos, keep it up!
It’s the same thing the starter wire in the fuse box wire both come from the positive terminal of the battery. whatever works for you 🤙🏼
Can i put a foglight on my pito, so I can find the hole easier at night?
Yes but it would be called a “LogLight” 😂
Hey man, quick question for you. Are you able to make a tutorial on finding the cable to connect on the inside for the power?
Also.. Lol I think I did something wrong because my daytime lights and taillights don't turn on anymore. Any suggestions?
Great video!
YES
Homie donde esta ? Where you been home???
great video dude...
what if i want the fog lights to work by themselves ?
Will this work for 2011 Toyota Sienna?
Did you wire them to turn off when high beams are on?
Hektor you have any video for install fog lights for Nissan kicks ???? Or is the same to the Toyota Siena ???? 🤔haha tú hablas español???? 🤔gracias
Hector I need your help. I put the “Ignition wire” to the 12v battery and it DID NOT WORK. Because I called the customer service of Winjet and they said connect the red “Ignition wire” to any 12V power supply. The light did not turn on but the switch kept on light. DID I BUSTED THE RELAY and the entire system?
I did not try to connect it to the ignition yet because I run out of time I need to go to work. I just want to ask your input first about this matter. Thank you
Eidderf Olevar connect everything first and let me know what happens 👍🏼
Homie Hektor hector I connected everything and put it in 12V and I got no light. But the switch kept on having light on... Then my sienna did not start when I tried. Then I got engine light on... The traction sensor kept o saying “off”... Then I uninstalled everything and then engine light went away.
This is for WINJET brand. I am thinking to try the SPYDER BRAND and will put the component connector to the component. I hope this time it will work...
Homie Hektor I reinstalled it and it worked well. Thank you for your video
So did you end up wiring the ignition wire to the headlight wires?
There is no way I can bend and lay down on the floor level, damn!
Here take my 💵
Where did you get the wiring harness kit from
So what you're saying is that you put your positive wire on your starting moto?
After 5 months u like lol I still appreciate it though
I have install the same fog lights for my 2011 sienna but the lights is WEAK!! i will change the bulbs to LED👍
Good info 💯
New vehicle?
Any informational auto books you would recommend??
It depends on what you’re trying to learn
bro any video on the firewall part? how did you put the connector for the switch from engine bay to the inside of the van(vise versa)? did you cut the harness and just connect them back together?
Edison Maglalang I just sliced the grommet and pushed it through 👍🏼
Homie Hektor i see. did u seal it back up after slicing the grommet? or will it be ok and not leak like that in the inside if ever it rains or car washing?
Edison Maglalang you won’t have any problems with it, it’s a tight seal and everything goes back into place 👍🏼
Homie Hektor one more thing that i can’t figure out with that red wire u tapped at that green wire did u cut that wire from the switch going to the relay? i did installed mine but did not do the wire tapping at that green wire you spliced under the steering wheel so now even i turned off the van my switch still illuminating.
What is the brand of your flashlight?
Cool!... Thanks!
I know how to wire this dam things idk why I watch the hole video lol I need to start admitting he makes cool vids ay
Thanks for subscribing Homie
The only part I was trying to see is how you found the headlight wire and that's the only part of the video is super blurry wasn't focused
I know. Send me your year, make, and model and I’ll help you out. DM me on Instagram: HomieHektor
2013 Toyota sienna
My wires weren't long enough 😩. Everything worked fine until I put hid headlights now they won't come on it's like they're not getting enough voltage when headlights are on.🤷♂️
Cuestión is the same work on a 2011 sienna
HEY IM DOING THIS ALSO!
Donde trabajas bro, quisiera poner las luces de mi carro
Estoy en Pomona, California☀️
I wanna do this to my highlander
Necesito poner el fog ligth de mi carro tambien
I would replace that relay, that can screw up the entire harness...
🤩🤩😍😍😍
yo tengo una kia sedona y no encuentro quien me ponga las las fog light tengo un poco de la idea pero no quiero que se me queme un fusible
De donde eres