I'm so glad you finally bought something to drive home. I was just about to unsubscribe because I was kinda burnt out on seeing only walk arounds at copart. Sorry the mustang blew the transmission. I think it will be an awesome car once you get everything sorted out on it. Anyway please do more of these type of videos. We love seeing them even when they don't go well. Love you randy
My apologies. I’ve been dealing with my father who is in a coma, on a respirator, with failing kidneys. I’ll try harder to focus more on making videos.
2 things on removing the transmission. 1. To get the top bolt on the starter out you will need a couple of long extensions, a universal joint and feed it in under the A/c compressor over the motor mount and on top of the starter. It’s a bear and there is a chance if someone took out the starter before they left the top bolt out. 2. Once you remove the transmission crossmember, put a jack under the front of the oil pan and jack it up causing the trans to tilt down some. This will make it soo much easier to get the trans back in and not have the firewall interfere while sliding the input shaft thru the clutch disk and into the pilot bearing. Good luck and enjoy. PS. If you don’t have a transmission jack I use two young men to pick it up and slide it in or out.
@@brentkiely657 i won a 2006 nissan alitma with 169k miles. And then i won a 2007 ford five hundred with 130k miles. They not the fanciest cars but they run and drive great lol
We enjoy seeing you work through and fix the problem and out the car back in the road. Throw out bearing can be replaced. Had it happen to me. Drove it 15 miles to my mechanic by power shifting without a clutch. Started in 1st gear, when up to speed put pressure on the shifter until it pops into 2nd, repeat for 3rd. Have to let off the gas pedal when power shifting to avoid grinding.
Cool. I’m stoked to watch the investigative video into the transmission and also the resolution video. I’ve always thought that body style looked good, hopefully it goes back together and works great!
I'm sorry Randy but as soon as you said uh oh...and that loooooooong pause of the car struggling and THEN the cut out to you panting i busted out laughing because i knew EXACTLY what happened and what you had to do (same thing happened to me years ago with a 95 Civic EX). That was a good laugh. I hope you get that mustang fixed soon buddy!
I'm in the middle of an AOD to T5 swap on my 95. Good video to learn from, and always remember to make sure you install the right speedo gear and throwout bearing correctly 😅😅
I did a c4 to aod swap years ago on a fox body tbird. One speeding ticket later, I learned they didn’t use the same speedo gear. I also learned later that an aod doesn’t live long past 7 grand…
With the speedometer being way off like that, the vehicle more than likely has less miles than it says on the odometer. It was racking up miles just in that short drive before it broke.
Nice car ! Makes me glad I paid $4,000 for my 2004 Mustang GT Convertible with 5spd. Mine was well cared for with no leaks. Mine has 150k miles. I did have to replace the Rack and Pinion that was shot @$1,000. Mine is RedFire with black top and charcoal leather...
Yay!! Finally some wrenching work. I’ve been tuning in for a few months now and always enjoyed your walk arounds, purchasers and repairs/rebuilds. Keep up the good work Randy. Btw love the new house 🏠 dude 👍
My 98 Mustang GT made that same noise a few years ago and I heard a clunk and I saw something shiny fly out from under the car and went into the ditch. I was able to drive it home. It turns out that the main drive pulley that turns the serpentine belt is a two-piece and the outer piece had separated. Yours, however, is more likely the clutch. Still, you got a good deal if it's only the transmission. I think those wheels may be Cobra-R's. Clean it up and get that rear fender fixed and you've got a car that is only going to appreciate in value.
Don’t worry about the ABS or Tracton Control once you get the terminals cleaned up. The trans is toast. Good luck 🍀 BTW you may have racing components for the transmission sounds expensive.
Oh yeah baby !!!! SN95 time !!!! the best looking model of these pony cars Randy this is the perfect opportunity of a car to mod and do even more , I'm sorry to the situation of the trans but remind yourself now its your call randy if its just the clutch and assembly or the trans needs rebuilt or you goin' to replace it with another manual or auto , now HEAR ME OUT PLEASE!!!! Randy if the trans with whatsoever or just your rebuilding this one better stick with this and upgrade the trans you know make it better more sturdy and enough groups out there to rebuild and upgrade your Transmission i'd love to go that route now also Randy with all this done to it you got to tune it Randy , it will help it run better and smoother and don't forget to service everything including the cooling system , intake manifold etc. This will be a car of profits by video and physically the car itself you ain't gonna lose on this one so you've got enough room to have fun with it . Lovin' the content , especially this was an excellent video , Stay safe TC , God bless !!
Hey Randy thrilled with the daily doubles. I can’t figure out why in the heck did you drive that Mustang home? Why didn’t you Use your trailer in the first place?
I love the videos man you do a great job at what you do I have been watching you off and on for a couple years you do a great job thanks for the content keep up the good work
I love this car,i would love to have one of this on Portugal and give him some good love. Restore and go drive sometimes and give many love.What a nice ride.
Randy you should install a set of those bumper guards like the cops have on your RAM so Jessica can push you out of those stall out situations to a safer place. Pushing those cars manually like that you're gonna end up in the hospital.
Awesome Can't way to see. I'm doing the transmission in my truck kind of stalled due to I'm to busy but it's OK I don't want drive it in the upstate NY salt.
Put a nice racing clutch Randy they are like $350ish range for a puck clutch for it. I think u should do nice clutch and a blower on this one with custom tune to have some fun for the channel as you usually take a loss on cars like this might as well have fun with it make it fast and with ad revenue you will make your money back plus more and people would pay more for car if it has blower and fast . It would be fun to see a build series too on this mustang
When we first came to U.S. 2002 in Texas. My first job was at Braum’s in Forth Worth Texas and it’s crazy this company is still open after such a long time.
I would keep this car once it’s all fixed, definitely a fun ride maybe a cheap replacement for the hellcat lmao. Would definitely love to see it stay on the channel, keep up the good content 👍🏻
Randy, heads up that you can probably code out that overdrive light. If the Autel won’t do it, I’m nearly certain you can change it in the PCM in A program called FORScan which is really cheap. Maybe $20 with the adapter and software on eBay or Amazon.
It’s a good looking mustang and the wheels are really nice. It’s definitely been abused as most pony cars are. I would have loaded it on a trailer and brought it back to shop and fix it
Wheres the stang at lol, not mad just curious, love the content man keep it up, I have three of those body styles and love them even though one has some bad front end damage, I'm hoping to fix it up and throw a 5.0 in it but not sure just yet..
She needs some work but is going to be worth it... That is a nice vehicle and I bet she is fast. Glad to see some content, must admit I am getting burned on looking at hail damaged econo boxes and luxury cars, but I gotta give you props for putting content out everyday.
Randy, you have got to get your health as your number one priority. We want to keep watching your vids well into the future ! Huffin and puffin like your 90 yeers old . C'mon man. Get off the processed food,junk food, ALL white stuff, sugar , bread, pasta . Stuff yourself with leafy greens, carrots, green smoothies and drink WATER not sodas or gatorade, nothing with sugar in in it. Eat 100% pure chocolate. Best for your heart. See a nutritionist if you haven't already. Don't reach for the FEEL GOOD food. Try this for a month and you will have so much energy you'll be doing more projects. Sorry for ranting but I see too many young men that are not taking care of themselves yet say they eat good.
Hey Randy, heard about your dad in a comment. Praying for him. Love the video and I know it sucks making this video while your dealing with that prayers
I am sorry Randy, but I laughed so hard when the car was making that horrible noise at the intersection where it broke down. I love how you calmly respond to things like that. I can't wait to see the carnage when the transmission is pulled out.
Today's market thats easily a $20,000 mustang 😆 but in all seriousness you can't go wrong with this car. Parts are so cheap and accessible please please please bring this car back! We have been waiting patiently for this kind of content for awhile. You owe it to us young man lol
I'm so glad you finally bought something to drive home. I was just about to unsubscribe because I was kinda burnt out on seeing only walk arounds at copart. Sorry the mustang blew the transmission. I think it will be an awesome car once you get everything sorted out on it. Anyway please do more of these type of videos. We love seeing them even when they don't go well. Love you randy
me too
My apologies. I’ve been dealing with my father who is in a coma, on a respirator, with failing kidneys. I’ll try harder to focus more on making videos.
@@AutoAuctionRebuilds prayers for you and your family. Sorry to learn this about your dad. God bless and take care of family FIRST always.
Oh wow. Sorry to hear that about your dad. Prayers for him and hope he gets better randy
Sorry to hear about your father family comes first 🙏🙏🙏
2 things on removing the transmission. 1. To get the top bolt on the starter out you will need a couple of long extensions, a universal joint and feed it in under the A/c compressor over the motor mount and on top of the starter. It’s a bear and there is a chance if someone took out the starter before they left the top bolt out. 2. Once you remove the transmission crossmember, put a jack under the front of the oil pan and jack it up causing the trans to tilt down some. This will make it soo much easier to get the trans back in and not have the firewall interfere while sliding the input shaft thru the clutch disk and into the pilot bearing. Good luck and enjoy. PS. If you don’t have a transmission jack I use two young men to pick it up and slide it in or out.
yeah i have a 99 gt of these that i bought for 800 i have replaced and rebuilt everything by now :/ lol
Get the feeling maybe it was Dad's Mustang he bought new, which at some point became Junior's Mustang but the title wasn't transferred.
Love the videos Randy, I won 2 cars so far this yr for 500 bucks each, both of them came out as a win !
What where they ??
Congratulations man!
@@AutoAuctionRebuilds thank you man !
@@brentkiely657 i won a 2006 nissan alitma with 169k miles. And then i won a 2007 ford five hundred with 130k miles. They not the fanciest cars but they run and drive great lol
@@gtflips you didn’t resell them?
We enjoy seeing you work through and fix the problem and out the car back in the road.
Throw out bearing can be replaced. Had it happen to me. Drove it 15 miles to my mechanic by power shifting without a clutch. Started in 1st gear, when up to speed put pressure on the shifter until it pops into 2nd, repeat for 3rd. Have to let off the gas pedal when power shifting to avoid grinding.
Cool. I’m stoked to watch the investigative video into the transmission and also the resolution video. I’ve always thought that body style looked good, hopefully it goes back together and works great!
Showing the genuine reality of risks taken by everyday new buyers. Great content!
I'm sorry Randy but as soon as you said uh oh...and that loooooooong pause of the car struggling and THEN the cut out to you panting i busted out laughing because i knew EXACTLY what happened and what you had to do (same thing happened to me years ago with a 95 Civic EX). That was a good laugh. I hope you get that mustang fixed soon buddy!
I'm in the middle of an AOD to T5 swap on my 95. Good video to learn from, and always remember to make sure you install the right speedo gear and throwout bearing correctly 😅😅
I did a c4 to aod swap years ago on a fox body tbird. One speeding ticket later, I learned they didn’t use the same speedo gear. I also learned later that an aod doesn’t live long past 7 grand…
Seeing you at stop light then catching your breath at Braums was exciting to watch! Nice
Your lucky to have a shop. I have been replacing a transmission in a Honda minivan in a parking lot and people say I don’t know what I’m doing
Love those new edge mustang's they look so good when modded right like yours. Looking forward to this series!
Reprogramming the ecm might fix the over drive light
Randy: LETS DRIVE IT HOME
Every Transmission-Related Part In The Engine: ARE YOU SURE ABOUT THAT
I like the Mustang, glad you ended up fixing it!
Thanks for this video Randy been looking forward to it, cant wait to see it all cleaned up as always a great video
Great icon Andrew. IBM would approve.
Finally! We've been waiting for over 2 weeks lol
Ikr lol stay tined for video but 2 years later
Great video randy, sorry about the mustang breaking down on you
Good Afternoon My Good Little Bro Randy Lee Shear Of Auto Auction Rebuilds
With the speedometer being way off like that, the vehicle more than likely has less miles than it says on the odometer. It was racking up miles just in that short drive before it broke.
Looking forward to more Mustang videos! That Apple Watch is becoming a regular character on the channel! 😂
Nice car ! Makes me glad I paid $4,000 for my 2004 Mustang GT Convertible with 5spd. Mine was well cared for with no leaks. Mine has 150k miles. I did have to replace the Rack and Pinion that was shot @$1,000. Mine is RedFire with black top and charcoal leather...
Hi Randy nice to hear you are going to fix this car may be the haters will leave you alone love the channel from the uk
This is a great SN95 Mustang - ok it needs work but it will be good! Good luck with the GT 💰💰
i love how the Siri from your Apple Watch just interrupts and you just go "ugh not this sh*t again..."
That’s a mean sounding mustang right there, can’t wait to see more content with her!
Love these style of video, good stuff Randy.
More of these vids please, actually working on cars not just looking at them 👍
Yay!! Finally some wrenching work. I’ve been tuning in for a few months now and always enjoyed your walk arounds, purchasers and repairs/rebuilds. Keep up the good work Randy. Btw love the new house 🏠 dude 👍
Th rovos wheels for the Mustage range from 250.00 - 300.00 a wheel
My 98 Mustang GT made that same noise a few years ago and I heard a clunk and I saw something shiny fly out from under the car and went into the ditch. I was able to drive it home. It turns out that the main drive pulley that turns the serpentine belt is a two-piece and the outer piece had separated. Yours, however, is more likely the clutch. Still, you got a good deal if it's only the transmission. I think those wheels may be Cobra-R's. Clean it up and get that rear fender fixed and you've got a car that is only going to appreciate in value.
Don’t worry about the ABS or Tracton Control once you get the terminals cleaned up. The trans is toast. Good luck 🍀 BTW you may have racing components for the transmission sounds expensive.
I've been waiting on this video. I can not believe no one helped you !!!
Oh yeah baby !!!! SN95 time !!!! the best looking model of these pony cars Randy this is the perfect opportunity of a car to mod and do even more , I'm sorry to the situation of the trans but remind yourself now its your call randy if its just the clutch and assembly or the trans needs rebuilt or you goin' to replace it with another manual or auto , now HEAR ME OUT PLEASE!!!! Randy if the trans with whatsoever or just your rebuilding this one better stick with this and upgrade the trans you know make it better more sturdy and enough groups out there to rebuild and upgrade your Transmission i'd love to go that route now also Randy with all this done to it you got to tune it Randy , it will help it run better and smoother and don't forget to service everything including the cooling system , intake manifold etc. This will be a car of profits by video and physically the car itself you ain't gonna lose on this one so you've got enough room to have fun with it . Lovin' the content , especially this was an excellent video , Stay safe TC , God bless !!
New edge
You blew out the clutch disc, damaging the flywheel. Replace the clutch disc, throughout bearing and resurface or replace the flywhee.
Hey Randy thrilled with the daily doubles. I can’t figure out why in the heck did you drive that Mustang home? Why didn’t you Use your trailer in the first place?
Content
The R on the rims might mean: Roush . As in Roush mustang. Throw outs are bad usually from dumping the clutch and burning out.
I’m excited for this project Mustang.
Absolute GEM, of a video Randy!! Sometimes......car video's make life smile on TH-cam!! Best wishes to you man! :)
That's awesome! I really needed a good laugh 😂😂.
Sn95 never gets old ❤️
@Dmetsys 94-04 were all considered SN95's just the 99-04 models were referred to as "New Edge" because of the redesign of the body styling. 👍🍻
I love the videos man you do a great job at what you do I have been watching you off and on for a couple years you do a great job thanks for the content keep up the good work
Sounds like the clutch came apart.
That’s normal for the clutch In them cars. That’s the throw out bearing . Those are bullet seat Rovos rims very nice
Randy: "It's just going to be me", Siri: "WHATABOUTME!!!11!!1!"
I love mustangs good luck buddy
Can't wait to see the clutch out.
Wheels are rovos they're a pretty popular upgrade for new edge cars. Fairly pricey as well.
Cobra r wheels stang looks good worth fixing and keeping
they are rovos, still a high end wheel tho.
@@levikroeker560 could be onow made newer style cobra r wheels but yes u could be right
@@autosalvage says rovos right on top lip of wheel😉
@@levikroeker560 I'm on phone can't see stuff like that unless blow the picture up. Good set wheels for sure
@@autosalvage all good. thats what i did lol screen shot and zoom in haha im a snoop with stuff like that.
I love this car,i would love to have one of this on Portugal and give him some good love.
Restore and go drive sometimes and give many love.What a nice ride.
Do what I do: work out, eat the cheeseburgers anyway. Can't wait for the limo!
😂
The speedo is crazy
Can't wait to see you working on a car again.
Rovos SVE NVX wheels about $230 each. Very nice.
That looks like a great project 😎
Great video Randy!! This is the stuff!
Randy you should install a set of those bumper guards like the cops have on your RAM so Jessica can push you out of those stall out situations to a safer place. Pushing those cars manually like that you're gonna end up in the hospital.
Great video and content😎🔥
Never wrong with a V8 car💪
Well done randy will be waiting for the next content on this car , Love the way you think , Stay blessed man
Awesome Can't way to see. I'm doing the transmission in my truck kind of stalled due to I'm to busy but it's OK I don't want drive it in the upstate NY salt.
I had a 2002 mustang GT that had the exact same noise...it was the transmission, I couldn't complain though since the car had 225k miles on it
Keep doing these vids I was tired of all the walk arounds
Put a nice racing clutch Randy they are like $350ish range for a puck clutch for it. I think u should do nice clutch and a blower on this one with custom tune to have some fun for the channel as you usually take a loss on cars like this might as well have fun with it make it fast and with ad revenue you will make your money back plus more and people would pay more for car if it has blower and fast . It would be fun to see a build series too on this mustang
That noise is the throughout bearing.
100%
What those rims are are RTR rims they're expensive rims usually found on RTR Mustangs
When we first came to U.S. 2002 in Texas. My first job was at Braum’s in Forth Worth Texas and it’s crazy this company is still open after such a long time.
Finally something new and exciting, its been a while.
Time for some go-fast parts! A broken part is an opportunity :)
Hey Randy why you at the rental house didn’t u move out
Mustang doing Mustang Thangs
The jenkie drive home in the hooptie was dramatic.
Happy Saturday Randy 👍 thank You for your wonderful content 💯. Can't wait to see what's up next!!👌👌
That deck system looks BA.
If I get a truck I'll look em up!
I would keep this car once it’s all fixed, definitely a fun ride maybe a cheap replacement for the hellcat lmao. Would definitely love to see it stay on the channel, keep up the good content 👍🏻
The rovo wheels alone are like $1500. Clean car.
Randy, heads up that you can probably code out that overdrive light. If the Autel won’t do it, I’m nearly certain you can change it in the PCM in A program called FORScan which is really cheap. Maybe $20 with the adapter and software on eBay or Amazon.
Would you mind finding and restoring a Suzuki Forenza
Did you check the oil?
15:11 this is me when I get out of the gym after a one hour workout. Yeah I’m out of shape.🤣🤣
It’s a good looking mustang and the wheels are really nice. It’s definitely been abused as most pony cars are. I would have loaded it on a trailer and brought it back to shop and fix it
that noise sounds almost just like my vortech blower on my fox body!lol
Wheres the stang at lol, not mad just curious, love the content man keep it up, I have three of those body styles and love them even though one has some bad front end damage, I'm hoping to fix it up and throw a 5.0 in it but not sure just yet..
She needs some work but is going to be worth it... That is a nice vehicle and I bet she is fast. Glad to see some content, must admit I am getting burned on looking at hail damaged econo boxes and luxury cars, but I gotta give you props for putting content out everyday.
Hey Randy I had that year mustang they didn’t come with white speedometer wonder if they switched it with one from an automatic
If the transmission is shot I’d just get it rebuilt it’s relatively cheep to get those manuals rebuilt
man i thought the Malibu did bad at least it made it home the mustang lasted 20 minutes motor sounds good though 👍
Lol those seats came out of a second gen mercury mountaineer. I have one with the exact seats
Auto idles higher. A lazy conversion doesnt change that. Needs computer chips changed to manual ones.
Get wit see what you going to do that car up bud
A stick shift Mustang with a blown clutch? I’d have been more surprised if it wasn’t broke!
Randy, you have got to get your health as your number one priority. We want to keep watching your vids well into the future ! Huffin and puffin like your 90 yeers old . C'mon man. Get off the processed food,junk food, ALL white stuff, sugar , bread, pasta .
Stuff yourself with leafy greens, carrots, green smoothies and drink WATER not sodas or gatorade, nothing with sugar in in it. Eat 100% pure chocolate. Best for your heart.
See a nutritionist if you haven't already. Don't reach for the FEEL GOOD food.
Try this for a month and you will have so much energy you'll be doing more projects.
Sorry for ranting but I see too many young men that are not taking care of themselves yet say they eat good.
Who did you pick for the Mitsubishi
🤦🏾♂️🤣🤣🤣 Your watch called cap! #Drysnitch Love you bro 💯
may need a canned tune to remove the auto from the pcm. cant imagine it would run correctly while searching for an auto trans.
Great car, gotta fix the clutch/gearbox and see how it runs. I’m sure the engine issues would be something to do with the ecu. 🇦🇺🇦🇺👍👍
Hey Randy, heard about your dad in a comment. Praying for him. Love the video and I know it sucks making this video while your dealing with that prayers
Much love from Kenya
I am sorry Randy, but I laughed so hard when the car was making that horrible noise at the intersection where it broke down. I love how you calmly respond to things like that. I can't wait to see the carnage when the transmission is pulled out.
Today's market thats easily a $20,000 mustang 😆 but in all seriousness you can't go wrong with this car. Parts are so cheap and accessible please please please bring this car back! We have been waiting patiently for this kind of content for awhile. You owe it to us young man lol
You should get a truck with a long trailer for vehicles like limousines
Even Siri can not believe it 😂😂😭