P1000 what is it, how to fix!
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- P1000 is a code that comes up when the computers obd Two monitoring system hasn't completed it's check yet. you would want to drive the car around for fifty miles or more, just to complete it's drive cycle. this is a code that shows up when people delete it with a scanner.
You are spot on regarding someone clearing the code! Thank you!!!
Your very welcome my friend!
Milage is irrelevant in getting the monitors to set. All the Monitors can be set in 20 minutes by looking up you vehicles drive cycles. Example... After vehicle reaches operating temperature drive 45-55mph for ten minutes. After ten minutes release the gas and coast for 30 seconds NOT touching the brake. That drive cycle is for evap and misfire etc.
wow, thank you thats some pretty good information.. appreciate you!
P1000 can show up when you reset the PCM / ECU and have not driven the vehicle for more than 100 miles.
That's good to know
Sounds like a real mechanic
Yes sir😁
Thank you
You’re very welcome
Thanks!!
no problem man
I parked my car in my driveway, tried to turn it on the next day and it would crank and not start. I thought it was the battery so I purchased a new one and installed it. Now, when scanning it's giving me that code. Because of the holiday, all mechanic around me are backed up. I have to wait till Friday to get my car towed to a mechanic.
okay do me a favor turn the key, and listen do you hear the fuel pump priming... it should sound like a hummmm
Sorry I just saw this. Yes it did. Today the tow came and took it to my mechanic. Guest what? The car turned on! My mechanic tried a few times until there was smoke coming from the hood and surprise it turns on.
I asked him to check it and make sure nothing else is wrong and he did. He told me your car if fine and nothing is wrong and did not even want to charge me.
I gave a little something.
Thank you for responding and trying to help.
thanks bud
Your welcome, thanks for watching
Did I miss the part in the 2 min video, on how to fix it??? Change the click bait name to "p1000 how to check it"....
I have had my car for 2yrs an i do all my own mechanical work that code has just popped up an i didnt clear any code this video was pointless
The video isnt pointless. A code doesnt have to be cleared via scan tool. The computer can remove an engine light when the monitors run their tests and complete their tests... p1000 is if any recent codes have been cleared. Maybe you had an issue with the oxygen sensor... then the code went off by itself. There for it cleared. A p1000 code would come up. Maybe you disconnected you battery , when you reconnected it the codes went away.. even leaving your gas cap open can cause a check engine light and if you corrected it then you will have a stores p1000 code until your car monitors that all testing is completed.
@@Kingcustomz you do not get a check engine light with a p1000 code
No you don’t, but if you hook the scanner to it and it picks up a p1000, then you know a code was cleared
Or replaced the battery
very true as well
This dude exaggerated a lot.and not once gave a good idea on how to fix it.please don't make anymore videos like there!!!!peace!
I think the problem lies with you my friend. You’re probably the only negative comment on this entire video. lol. I’ll continue making many more
Where is the “how to fix it”???
How to fix it is, drive it around for 100 miles. And see if any lights come on. If no lights come on your vehicle should be good. If a check engine light comes on. Scan the light and see what code comes up
No sabes lo que hablas compa
sé lo que hablo jajaja
Lol
Lol