ARRMA Limitless 100mph+ Speed Car - Phase 2 Complete (Hobbywing Max8 6S Combo)
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- ARRMA Limitless Unboxing: • Unboxing: ARRMA Limitl...
ARRMA Limitless 1/7 Scale Speed Car - Phase One Complete: • ARRMA Limitless 1/7 Sc...
ARRMA Limitless AU: www.metrohobbi...
Ovonic site: www.ovonicshop...
Ovonic USA: www.ampow.com/...
ARRMA Limitless Horizon: www.horizonhob...
ACE Hobbywing 2000kv Combo: www.metrohobbi...
Hobbywing Max8 2200kv Combo: www.metrohobbi...
Hobbywing Max5 ESC: www.metrohobbi...
Savox Servo 1210SG: www.metrohobbi...
AmpedRC Driveshafts: www.ampedrc.co...
AmpedRC Facebook: / ampedrc
Murder Ripple Packs: / posts
Aussie RC Playground Instagram: www.instagram....
Aussie RC Playground Facebook page: / aussiercplayground
Intro done by Wiziquad: / wiziquad
Music purchased from: www.premiumbeat...
Track used for intro: Modern Logo www.premiumbeat...
Artist: Olive Musique
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
What a jet👍👍 I wanted to curse to real display my feelings while watching this but not sure if it would get blocked😨 Vas, that was insane. Loving this entire process. I've never seen anyone in YT showing their process to achieve their goal. Very proud for you man! Looking forward to Phase 3.
CONGRATS on the 100 mph pass!!!!!!! I could literally feel the excitement in your voice, keep up the outstanding work Vas...........
YES! Great job!
I just woke my wife up, and she isn't very happy with me right now. It's 2:15 AM MST here in the states, and I yelled YES! when you hit 100MPH, and it woke her up.
Unbelievable/awesome runway!! !👍🏾👍🏾 Thanks for sharing!
Dont know how you dont have more views, but keep at it man. Very informative and honest assessment all around. Very appreciated!
Awesome job getting to the 100 mph club, keep pushing!!!
Like how you say it like it is without all the nonsense. Subbed 👍🏻
Great passes! Gps caught the speed further than the speed gun. Congratulations on the triple digit run!
Well done Vas , the sounds of the beast are like a jet. Great to see how the different combos work. Thanks mate, need one of these .
Thanks Peter, appreciate the kind words. 😊👍
Yes....awesome job! Now I need to get in the 100mph club! It's funny that my fastest RC is my Tamiya TA04SS at 78mph.... I need to try harder with the Arrmas!
Tomley RC I love a quick Tamiya. Check out tbe Tamiya speed run page for more fast Tamiya’s.
facebook.com/groups/602958430106827/?ref=share
Grats mate your genuine passion was coming through on the video! Nice work
So happy to see your video come up in my feed!
Bit late here but huge congrats to you. That’s genuine excitement right there.
Thank you very much. 😊👍
Congrats Vas! That was sick!👊🏻🤘🏻💥👍🏻
Wow!! Awesome work Vas!! She even sounds like a weapon!!! Can't wait for the Next phase!!!
Way to go . Nice to see you have success in breaking a 100 m.p.h. 👍🏻
Keep the great video’s coming Aussie RC
Hell freakin yeah my brotha thats awesome congrats man happy bashing bro.
My gosh! That is awesome! Amazing build! Great video my friend!👍😎👍
Great video as usual Vas. You could find some straight stretchers on the western ring road or try the speed traps down on the Geelong freeway and freak out the highway patrol when the clock a car at 170km/h [ ps for all that may not get the joke these location are not recommended testing, as they are major roads in Melbourne]
Don't forget to wind down the shock collars on your rear shocks especially. I found that helped a LOT with traction issues.
I'm knocking on that 100mph door as well. Loved your reaction when you're trying to stay composed. Good job!
I just got my max 6 combo with the 1750 can’t wait to install this week cheers RCFl
Glad to see you're still making videos. Had me wondering. Anyway your honesty and transparency is amazing. Thank you. Keep up the amazing content.
Not sure why you'd say that, I've been uploading an average of a video per week for a long time... Glad you're still watching though, thank you. 😊👍
@@AussieRCPlaygroundi thought you missed a few weeks but looking back i just wasnt notified
I did take a break for a bout 3 weeks during Christmas and new year's, maybe that's what you're referring to... But I'm trying to upload 1 vid per week on average.
I recently just built me a limitless and drove since Christmas and just figured out 3 weeks ago it does 100. I literally looked up the max size motor it could fit and already had some smc packs 90c and 120c for my xmaxx. I went with the max 6 and rocket 1580kv 4585 motor stock gearing. When I GPSed it recently I was blown away when I realized it did this speed. I'm now nervous when I drive it and I have a mountain more of respect for it. I can run 8s and wont even attempt it. With that being said I've changed a few things on it cause of heat. 1st If your running a max 6 esc, I would highly suggest getting a rocket 35mm fan for the esc or run max 5 esc. 2nd some type of dual motor. I hit 100 flat with the 120 graphene race smc battery packs. Gotta run lipo alarm at 3.4 but cut off esc LVC.
Oh man that was great! Well done Vasco Awesome job Brother.
Thank you very much. 😊👍
Those hobbywing esc's have a over current protection/voltage drop protection. Also i hear the car isnt topping out on the rev's. i would suggest dropping the pinion down to 25t to reduce the voltage drop and amperage consumption , OR Get a Castle XLX and program a 300a limit. Best of luck with your speed runs. My best is 141mph on 6 cell in a slash 4x4 (vid in my channel)
Thanks for the tip, but the aim of these tests is to see what can be had in a Plug & Play scenario with items straight off the shelf and what's included in the kit.
Also, the Slash weighs about half what the Limitless weighs and every speed run I've seen with a "Slash" barely resembles the actual car anymore. It's all been modified with carbon fiber or alloy and all sorts of other mods including different bodies, etc. Unless yours is different, I'd say you can't really call it a Slash anymore, but rather some custom build using SOME Slash parts. Just my opinion based on what I've seen. Regardless, 141mph is pretty fast though, so well done. 👍
Congratulations. I've been wanting to try those HRB batteries. You have certainly convinced me they are the way to go.
Gr8 information as always , loving the series , can’t wait 4 the next build , happy days what a rush 👍🚗😎
Well done Vas, keep it up! Keen to see what your results are chasing the 120mph mark
So sick I love that car!! I'm running a max6 with a 1650kv. Right now a 34t pinion on the original spur, think I need a smaller spur though. What do you think? I'm om 8s btw
Congratulations, on 100mph barrier !. More to come 😀
Great video , so informative! Thank you for the testing and time spent bringing this info to us. Can’t understand how anyone would give a video like this a thumbs down... 2 thumbs up guys!
Thank you so much, that means a lot. Glad you enjoyed the video. 😊👍
Aussie RC Playground can’t wait to see the next video in the series!
Hey Vas, what gearing are you using in the mojave?
I hear the Limitless is a dog out of the box. Too soon? 😄 Great pass, Vas. I've geared my Infraction to 100 mph with the K8S electronics but I haven't tested it yet. I actually really nervous that I'm going to ball it up 😄 Great video 😎👊👍
Wow, did you add a 50cc motor on that thing. Lol super fast, great job my friend. Cheers from California 🇺🇸
Congrats on the 100mph! 👏👏 Your reaction was priceless 😂
Haha, thanks man. It was just the joy of breaking that milestone, haha...
Wow that clip to start off. I was like "fucking hell, that noise" 👌
Awesome Vas!! Congrats on the PB! Arrma Limitless is awesome I must say!! Stunning and beautiful, Badass and Powerful. I got my first 102+MPH with this car. EPIC brother 👊
First of all, congrats! Good run. Maybe the more-or-less random c-rating of battery companies caused it? Seen a couple of videos that suggest that the way companies rate their c-rating of batteries can be quite different. Tested some 50C Ovonic batteries too, and even though they worked great (in vehicles demanding much less power than yours) it might be that Ovonic rate their c-rating higher than the other company you used (that worked).
Congratulations on reaching your goal I have the same setup in my typhon
Congrats on 100!
Well done on the achieve 👏 And the sound is incredible!
It'd be so fun getting a driver cam view with a vr/helm setup on these!
Hi vas I just got a limitless with HW max8 2200kv combo but I'm having heat issues, it'll run for about 3 to 4 minutes then cut out, its frustrating to say the least, was going to buy the max6 combo but dont really want to pay the money if I can sort the max8 combo out. I wont know if it's my batteries because i havent got any others. I dont think fitting any motor fans to it will do the trick. Any suggestions, thanks, well done for the 100mph
Disable your cutoff when speed testing. Gives you less problems.
Man, why didn't I think of it myself! Thanks for the advice, bro 👍
Sorry for the English I am French. And if you used only one 6s battery what would have been the result?
And what is your pignion? I have exactly the same configuration as you.
Thing sounds like a legit F1 car.
Was thinking the same thing. Once it hit that 90+ it started taking on that sound of the full size cars when they rip by.
Well done Vas. Congrats on the 100mph. Interested to see how you go out of the box with the XLX. Ideally changing the settings will give you the best results as castle have a no voltage cutoff limit and a no amp limit (best to set it at 400amp limit and that’s all the esc is good for anyway) then depending on the motor wind a little timing might help get a few more mph.
That car sounded awesome and it ran straight as an arrow for 164kph. It didn't wander at all.
I have the hobbywing 4985, and had a Max6 (but that's going for RMA), will the original blx185 be ok running that motor on a 21t pinion? I am probably going to replace the Max6 with a Castle MMX8S or XLX & possibly switch out the motor for a TP 4070CM. Also this is in a heavy Notorious with all the M2C goodies.💪
AWESOME like ALL ...nice Bro Limitless i add to your playlist
Hey mate love watch on your channel whereabouts are you located what area what suburb I wouldn't mind getting you to build me the limitless like yours can I ask you how much would it cost for the whole car setup I would probably only run 6s so I can achieve about 80 mile an hour or more
Congrats on 100mph! Love your enthusiasm! 1 minor suggestion, you are using your standing position as the end point of the run, yet the car still seems capable of accelerating as it passes you. If you place Noah further down the street and stay on the throttle a bit longer you might be able to get a bit higher speed. Apologies if there is some feature of the road that prevents this and I didn't see it.
Yes, the road ends just after where I stop and turn around (it turns right), so if I hold the throttle for much longer I won't have enough road to stop and I'll slam into the kerb. 😬 100mph is about the limit of this road, any faster and I won't have enough space to pull up. It's a shame because this road is perfect for speed runs...
Bigger esc and cap pack good vid.
This car is so amazing! When I saw it in my lhs in person and for only 399$ just blows me away. I'll ask you guys do you think this is single handedly the best speed run platform on the market? Congratulations brotha!
I've been doing a lot of research into top speed runs as of lately, and I believe the battery is not your first biggest bottleneck, but your ESC. the Max8 has a much lower over current protection limit compared to other top ESC's out there (castle, tekin, etc). People have reported greater success with mamba monster (original), and even better with mamba monster 2 if sticking to 6s. The Mamba Monster X is very similar to the monster 2 but just has more features including running sensored. If you are going to run with hobbywing EZrun, I would recommend Max 6 with a 8 cell battery (running 6s will net you similar performance as the max8), or Max5 if you want to run 6s with a raised safety amperage cut off compared to max8. I would strongly encourage you to run max5 preferably 8s, or at least the max6 in 8s to notice noticeable gain and run a much more energy/power efficient battery/motor/esc setup. You will want to go with ideally 1500kv, 1650kv, 1700kv, or 2200kv in 8s for easy gearing options without big modifications (only 2200kv out there is the TP 4070 CM 2200kv ***CM Version ONLY which can run 75k rpm for 10s bursts on 8s***). If you are determined to run 6s first, than you will need to upgrade the ESC first before the batteries (as the batteries were not your bottleneck most likely this early. You can measure batter temps if you feel they are). Good Luck.
It frickin sounds like a jet engine! (It’s insane)
Congrats bro 👍 Very nice fast passes. Btw 100 mph sounds cooler than 160.9 km/h :D
I am getting a Limitless i have 2 questions,
What is the difference between max 6 and max 8 esc ?,
I have found the Rocket 4585 motor for it,
There are 2 kv options 1580kv or 1100kv,
What is the difference between these 2 motors ?.
I don't want the limitless drifting like the infraction with to much low down torque.
A save here from Brazil. Great video and channel. Now you have a subscriber here from America. I avoided using this engine in my Kyosho Inferno Gt2. Could you tell me what ratio of pinion and crown you are using in your car? Thanks. Big hug.
Thank you so much. 😊
Hey man i have this combo in my traxxas maxx👍💪 the motor even gets hot in that little truck. 20t 50t it flies. 👍 And that combo was out of my be6s . So now i have a surpass hobby 150a esc and a rocket 4092 motor in my be6s it's awesome!!
I need your advise as a king of RC'S 👑🤣 WHAT should I choose? Mojave or Kreton? I have senton 6S V3. now. just for a ride not tough terrain. Greetings from Poland 💪👊💪
How many back to back passes before it thermal cuts out?
You can do it with them batteries you just have to use four of them, you have to rent them in parallel that will cut out your problem you having
Whooooop! What a great guy you are mate
Um salve aqui do Brasil. Ótimo vídeo e canal. Agora tens um inscrito aqui da América. Eivou usar esse é motor no meu Inferno Gt2 da Kyosho. Você poderia me dizer que relação de pinhão e coroa está usando no seu carro? Obrigado. Grande abraço.
Muinto obrigado. 😊
I had cutting issues running a max 6 with a cap pack in mine. Switched to a castle esc & the problem went away.
What gearing i got a limitless with 27/46 with a 2200kv any guess on speed?
yea HRB s i have are 50-70 burst , i feel HRB are a true c rating ,compared to other bats iv'e tried but i use roaring top 70c the most with no issues.. HOBBYWING Ezrun MAX 4985 1650KV SL Motor doesn't get as hot. if you have the room.. hobby star has a 4068 2050KV motor i use also for 6s.. but the 1650kv will run 8s ..
Congratulations bro. And well done,
Awesome, great job!!!!
Can you compare IR readings.
Nice video vas , but its also that ESC not good for speed runs , it doesn't like it , lol , yes tp and xlx all the way 👍
Very nice 👍 pinion 27. spur 34 or 39;; thank you!!!
She's a moving bro!
Think the max8 system would be good for a senton speed chassis as far as the weight goes
Yeah, I think that would work much better. 👍
Sounds just like a Indy or Formula racing car nice 😊👍🏾
HBR? Huh, need to give them some try in my 1/8 scalers, in my 1/6 acalers (Losi Sbr&Srr) weren't the brightest, lacked the punch.
I run a set of 50C HRB 3S 5000kv in my 6S trucks and find they they are a bit softer on power delivery than my Hobbystar 6200mah 3S 50C packs. For bashing, they work fine though and considering the weight comparison, I prefer the 5k's in my ERBEv2 due to the suspension not liking the extra weight of the 6200's. I have 4 of each, so I usually run the 6200's in my outcast and the 5000's in my ERBEv2 and SavageFlux HP.
Awesome! Congrats!!!
You need a landing strip at an airport I think your cars are getting to fast. Lol awsome video
WOW! Just WOW!
Sill some nice run 🤟🤟🤟
Still waiting for the mt410 vid ?
I'm having the same problem with my max 8 combo and I'm using SMC graphene extremes 8000 mah 120c
Where do you get the HRB batteries?
Best place I found is from eBay.
nice car and speed runs👍👍
100mph on Max8 is impressive. The cutting out was killing me. I’m sure it’s because I’m not great at speed runs.
What's this 100mph business ! Come on Vas promote the Metric system :-) Anyway Great stuff.
Congratulations 👍🏼👍🏼
Sounds amaaaaazing!!
I have a 100c battery in my limitless and it melts the sodder on my motor connections. But she's 3 digits. Get a bigger c rating
Yeah, unfortunately cheaper batteries C rating claims are usually incorrect. I like Ovonic, i use one of their chargers, but Ovonic batteries are budget batteries like Hoovo and Zeee, and their C ratings can't be completely trusted.
My 4s Zeee "80C" battery in my Felony will cut out sometimes, and Felony only requires 50C batteries, so Zeee probably claimed twice the C rating to sell more batteries.
I like Ovonic, but i wouldn't be surprised if they use similar selling tactics.
Budget lithium batteries is a very competitive market, abd they wouldn't sell as many batteries if they didn't do SOMETHING different.
That's better than lying about the capacity, which can result in swelling or fires, if you're charging at 1C.
That sound is epic! I thought you bought a ripple killer, maybe that will help.
It has a cap pack in there, but that isn't going to stop excessive amp draw or batteries from sagging during a run. At least now I know what's happening and I can fix it. 😊
Aussie RC Playground OmI thought that was the function of a cap pack but perhaps the amp draw is too long. Or maybe I misunderstand the whole meaning of it. For what I saw on TH-cam those are mostly used by rc speedruns.
Hobbywing needs to add more esc tuning cause this 200a cut off is really Ridiculous
Yes yes&yes brother awesome 👊🏿🤝🏽
Get a mamba monster x and watch them numbers go up there of if you really wanna make magic castle xlx and make them hrb 100c they the best batteries to run
Solder on a condensator! My friend did that on his speedrun car!
Never mind, i saw you had it!
And have a nice day !
Amazing!
Dude you need to get some way better batteries. SMC racing makes some very good ones. I have 6 at 5000mah 97 amp / 90C. I also have some Turnigy Graphene that are 75C and 90C and they also run amazing. I get no power loss what so ever even at 120mph and over. And of course I run really good cap packs. I have that same hobbywing max 8 esc in one of my setups running a castle 2200kv and it bangs over 100mph all day long in a traxxas slash awd with the SMC lipos.
That's all very good, but the Slash is a paper clip on wheels compared to this car. The Limitless weighs far more than a Slash and will pull more amps as a result. Please don't compare a Slash to this car, it's in the same category, they are 2 very different cars of different sizes and weights.
@@AussieRCPlayground My slash is just one of mine actually. I have a kraton that I converted to a drag car and a typhon. I do 132ft drag races against many other people, we have a drag racing league here with about 50 people racing every other weekend, sponsored by a local hobby shop. And I also do speed runs as well. The limitless may be quite heavier but I was talking about higher amp rating on lipos not the actual car they are in. Oh yeah and my slash is super heavy by the way. No more plastic left on it I converted everything to metal including a 12 inch long steel wheelie bar. So yeah not a paper clip on wheels bro.
@@AussieRCPlayground Ill put my slash on a scale tonight with the lipos in it and ill let you know how much it weighs. Again it wasnt about a Slash.
Haha, as is the case with 99% of people who claim to have a "Slash" speed car, it's not really a Slash anymore. Going by what you're saying, it's a custom built chassis with some Slash parts. Which is what I suspected...
You don't need to weight your car, I have a feeling it will weigh just as much or perhaps even more than the Limitless.
Please try to understand what I'm trying to do with this car and why. This is basic stuff (the setup) with mostly default settings on everything and I'm using batteries that are affordable and accessible here in this country. I know 100mph may be old news to a lot of speed run guys, but it's all plug-n-play gear I've used and ANYONE can do this. Now that I've broken through the 100mph barrier, it will start to get a bit trickier to keep things stock and I know I may need to do more tuning, more custom work and yes, get better batteries. I'm trying to avoid the Turnigy stuff, though, as I've had too many puff up after a few runs. I used them in the past and even promoted them here on the channel, but soon found out they aren't that good. And they're getting more expensive than other well known brands.
@@AussieRCPlayground Yeah your right actually my slash isnt a slash anymore i suppose it doesnt have anything left on it that it came with except maybe some screws lol. Anyways yeah its a heavy bitch for sure. I have to keep it on the ground at the speeds I run it. It only has maybe 3mm of travel on the shocks as well. You could stand on this thing and the chassis wont touch the ground. You would break the GRP wheels before anything. I know its not the typical stock setup since ive dumped around 1500 bucks in it. But yeah if you ever have the chance check out the lipos from SMC-racing.net. I cant break these batteries if I tried. Im still running lipos from them that are a solid 5 years old no lie. And to me at least that brand is affordable and very reliable. I definitely have got my moneys worth out of them. I would say 100+ drag races and speed runs and they are still going strong. Just trying to pass on personal experience with you im not trying to bash you or anything.