I subscribed because I like how methodical and willing to show “I am not perfect” attitude. Your humble spirit and excellent teaching will guide me today as I turn my first acrylic pen!.
Been out of pen turning for a while. I used a roughing gouge for a blank today but was intimidated by getting close to the bushings. You mentioned a sharp tool which is a must. You carefully worked toward the end to trim the blank to the bushing size. Answered my questions for the final cuts. Thanks.
Bonsoir, Je suis toutes vos réalisations et j’apprends beaucoup de choses. Je débute dans le tournage et j’admire votre travail qui me procure un tas d’idées. Merci encore à vous. Cordialement Jean-Marc FEIEREISEN
Thank you, Thank you. I'm turning acrylic pens for gifts and this is my first time with acrylic. The first two were turned with a skew per instructions received with the blanks and they took forever. Then I saw your video. You have saved me hours at the lathe. Now I enjoy turning acrylic as much as wood blanks. I look forward more videos.
Thank you Marcus, I'm glad my video was helpful. Have fun making all those gift pens. The best part about giving a pen as a gift is the reaction and the amazement the recipient gets when they find out you really made it. I love that. Regards, Bob
Harry Watts Thank you Harry, It was fun to make, hopefully it will sell quickly at the craft show and I will have $'s for more turning supplies.Regards,Bob
Awesome turning Bob, great idea using the gouge. I like the skew but I'm going to give the gouge a try. You've spoiled us this week with 2 videos, thank you for spending your valuable time showing us these and inviting us to join you in your shop. Looking forward to the next visit. Regards Bob.
Plaustrum Crafts Bob, I don't normally use the roughing gouge for the entire process. I was turning antler and had to sharpen before I completely trued it up. Once I sharpened the gouge, it cut like hot butter so I attempted to finish the pen with it and it worked out ok. If the gouge isn't really sharp, it can cause little chips in the blank.Regards,Bob
Another great video Bob thank you, 5 years back so hopefully duchess pens fit easier :).. Really enjoy the videos and with a fair wind and a bit of luck "should" turn my first acrylic pen in the morning.. All your videos Ive watched so far are showing me the skills.. now need to put what I have seen into practice.
Ive tried turning acrylic 3 times in my life, all 3 were pen projects, and i ripped massive chunks off every single one, while using a carbide tool. I have left the pen kits sitting for at least 5 years, and I think I wanna give it another go. I think this is more a matter of you being a talented and skilled craftsman as opposed to turning acrylic being an easy task.
Try turning the carbide tool at a 45 degree angle instead of presenting it straight into the turning. The less of the blade to contact the turning the better. Carbide is really aggressive. Regards, Bob
Great job with the pen Bob, My wife was throwing out a small old oven tray and i use that on the bed of my lather when Micro Meshing or C/A glueing and polishing and it stops anything getting on the bed of the lathe.. cheers Mick!!
Mick Burns I am on the look out at rummage sales and thrift stores for something to repurpose for this task. I usually use a paper towel but they get damp and I want to keep the bed as dry as possible. I oil my bed periodically to make it a bit more resistant to moisture but avoidance is the key.Regards,Bob
Nick, It usually takes one pen to figure it out. After the first one you know what to do and just keep trying new things and improving your skills. It's a very addicting hobby. Regards, Bob
You're welcome Ron, If you ever purchase a lathe, you'll get hooked on pens pretty quick. They are fun to make, have hundreds of choices, sell well, and make excellent gifts. Come to think of it, what are you waiting for? :^) Regards, Bob
If all you plan to make is pens and small stuff, then a small lathe like that will work just fine, that's what I have and all I use it for is pens. Once you start turning, you'll want to turn bigger stuff. I think a small inexpensive lathe is the way to go, spend your money on quality tools. As you sell pens, it will pay for that lathe and allow you to save for a bigger on. That's what I'm doing. I want one like Carl Jacobson has. Man, that's a lot of pens. :^) Regards, Bob
Thank you Fredrik, I received the blanks you sent me yesterday. I am looking forward to turning the moose and reindeer. Thank you again got your generosity. Sincerely, Bob
Well well well I have never used a skew I always use a roughing gouge. I think mine is a bit smaller than yours, which makes it easier to handle. I started with acrylic so far In have not made a wood pen. I have just got my hands on some wood offcuts so I may discover a whole new way of doing things. Have a lovely day.
Hi again Bob, I went through your video again and just a quick note. I polish acrylic with the lathe at a very high speed. It builds up a higher gloss finish.
I had an old plastic bowling ball at home and cut it and made a pen out of it.. Not an easy task because I didn't have a great saw to cut the bowling ball with but it ended up pretty cool. Made it for a bowling friend of mine.
Great job Bob. That's the same and only tool I use on pens, just like you did there Bob, then I sand. It is like you said it has to be sharp. On bowls I do not use a bowl gouge but the carbide cutting tools, they work great.
Piety Ridge Dan Haniff Thanks Dan, Since it worked do well, I have been using it quite a bit lately. As long as I keep getting good results, I think I'll stick with it. I haven't got into bowl turning. I just got a Nova chuck so that puts me one step closer but the real concern I have is does my lathe have the oomph to turn a small bowl. I will find out soon. I'll probably video it and show you guys the success / failure.Regards,Bob
Great video after all these years! I just used the roughing gouge tonight for an acrylic pen. I use it all the time now. I switched to this from the carbide tips I had, they kept gouging the blanks and ripping chunks out of them no matter how I tried to change it up. I thought I would get it after a few dozen pens but nope, I can't swing it so I'll just use what works for me for now. Maybe its my technique who knows.
We are new to turning acrylic. We have watched several videos on "how to"... The one thing that we have not been able to find is information on how fast to run the lathe when turning. Any thoughts or suggestions would be a great help. Excellent video. Thanks for sharing your knowledge.
I primarily turn pens and wether it's wood or acrylic, I turn at the highest available speed my lathe offers. Larger items should be turned at slower speeds. Regards, Bob
Great vid Bob, thanks. Mounted my first piece of acrylic today and just turned it round, sanded and polished to see what would happen. No great dramas, skew worked lovely but I need to spend more time sanding with the lower grits, I have a few marks. I am going to re-mount it tomorrow and finish the job. :)
That sounds great Collin, While sanding tomorrow, turn your lathe to its lowest speed and dip the sand paper in water. It will cut down on the dust and the heat. The heat / dust combination will scar the acrylic. Let me know how it turnes out. Regards, Bob
Thanks Bob. Doesn't it STINK!!! I turned two this morning, a pen and pencil Sierra pair. I have learned a few things: 1. Loving my new skew. 2. Sharp tools! 3. It marks soon easily! 4. Wet sanding makes all the difference. I have the same lathe as Mike Waldt so can go pretty low on speed. 50RPM was a little too slow so settled at 250 and wet sanded. 5. You have to work much harder to ensure that you remove all the scratches. I have a single scratch on one of the pens that I have managed to hide under the pen clip. :) I will persever with acrylics (and will get some white primer paint) as I think they will be popular, but I much prefer a decent figured wood I think. Thanks again for the video and taking the time to chat with me. :) Coll
Collin, Instead of sand paper, purchase some Micro-Mesh pads. They are abrasive pads that you also dip into water to use and they will really cut down no the scratches while at the same time polishing your acrylic. Then I use a scratch removing polish for the really fine scratches and to give the pen an amazing shine. You will love the difference it will make on all your acrylic pens. Regards, Bob
Yep, got those. :) "Sanded" to 600 and then onto the micro mesh to 12,000. Unfortunately my tool skill isn't yet good enough to start straight on the micro mesh. :( Coll
If you have the MM pads, don't use sand paper at all. Make a very light & smooth finishing cut on your blank, sometimes I sharpen the tool prior to that cut, then go straight to the MM. It's faster and you don't have to worry about repairing and damage from the sand paper. Give that a try and see if it works for you. Regards, Bob
Nice video! Any special precautions drilling the acrylic blank? I was thinking perhaps a split point drill and leaving a little more length than normal for wood just to allow for chip out. Would appreciate your input.
When I’m worried about chip out, I leave the blank whole and mark the bit with a piece of tape for depth. Drill a little at a time. 1/2” to 1” then stop, clear the bit and test how hot it is. If it’s hot to the touch pause and let it cool before continuing. Once the blank is drilled then cut it to length. You get perfect entry and exit holes that way. Regards, Bob
Good job Bob. I have found that I only use a roughing gouge for pens now as I can get a better finish and can use the wings to sneak close to the bushings. I'll do a video soon to show you how I've ground the gouge to use it for pens. Best Wishes, Brendan.
baconsoda Thanks Brendan, I'll look forward to seeing the grind. I usually use a skew but this worked very well and was quick. I also can worry less about catches and focus more in the pen.Regards,Bob
Thanks for the great videos. You explain each detail so well and as a new pen turner it is so helpful. I noticed that you use a piece of cardboard on you pen press to protect the pen from damage. Did you ever consider making something permanent to affix to your pen press (wood, leather, nylon ?) Once again, thanks for all the great tips.
Thank you Thomas Yes that cardboard is to protect the pen. I really do need to make something more permanent. I have some HDPE that I could probably drill out and use. Regards, Bob
great video bob,,,i have been using a skew on wood but it seems like it is much harder to cut the acrylic,,,i kinda like the skew on wood it leaves a much better finish,,i was hoping to use it with acrylics,,maybe I just need to work at it,,lol,,, I wish you would post another video using a skew if that's possible
Thank you Jeff, I don’t use the skew often. With the sharpening set up I have, I can get my gouge really sharp and it leaves and amazing finish. Regards, Bob
I have seen these sanding pads in store, and have wondered how long they would last.They are not cheap here in australia. Very helpful video. I am just starting out.
+Graham Faravoni Thank you Graham, If you can get a nice smooth finish cut on your pen, they last for a long time. If your finishing cut is rough and you have to sand more, they go quickly. There about $13.00 US so I think there pretty expensive here too but there worth it. Bob
One of the cheapest aspects of pen making is the cost of sandpaper or sanding pads. A saying circulates, "Use sandpaper like someone else is paying for it." Have fun and be safe.
Very nice pen, i love blue colour. wish i had seen this video before i turned my first acrylic pen. But i did just what you did, i used the rough gauge and the last stroke with av skew. After sanding and polish it looked ok. But when i pressed it together i looked weird. I pt i wrong together and i cante manage to take it apart again. I have seen video from you how to take it apart but cant do it properly. Excuse my english. Regards Hans olav
I would like to ask you on what tool I can use to turn the Rocklers piano key blank ? I glued the tube in with 5 minute epoxy and glued the keys in with thin super glue then leveled the keys to the blank by hand sanding before mounting to the mandrel. Can I use the carbide tip tools that Rocklers sell .15:115:11
I’ve never seen that blank so I’m not really sure. Carbide can be used to turn most blanks. I prefer the skew for the finish it gives. It might be best to call Rockler and ask them what they recommend. Regards, Bob
Hey Bob, It looks great. My first turning with acrylic did not come out well. I had both slim line blanks almost turned down, then they both exploded. The blanks were hard acrylic of the American Flag. My speed was around 1200 rpm, I am not sure if they should be turned at a faster speed. I use the carbide tools for turning. Any suggestions to finish the blanks without exploding, cause that can get expensive. Thank you Ron USCG MKC RET
Hello Ron, I usually turn acrylics a little quicker, maybe 3,000 RPMs. They usually explode because there’s a gap between the hole drilled in the blanks and the tube. The glue doesn’t fill that and even if it did, you’d see glue and not blank because the blank Would turn away. The entry hole is always the issue so leave the blank a little long and try drilling from the other end on a themed blank. For a regular blank leave it long and test the tube fit. Cut off the larger hole and the entry end. Regards, Bob
@@RJBWoodTurner Thank you Bob, I turned at a little 4000 rpm. I have had two work out ok and two that came apart. Is there a difference in the resin that is used?
Bob, Thank you for all your informative videos. I've turned a few pens but I'm still not sure at what speeds to perform each of the operations (turning, sanding, polishing etc).. And also does one use different speeds for different blanks (soft or hard wood, acrylic. etc). Is there a chart somewhere showing this info. Keep up the great work producing these videos. Hank Shannon
Hello Hank, Everyone develops their own feel for speed. I turn all pens regardless of material with the lathe wide open. (For my lathe roughly 3,000 RPMs.) I sand and finish at the slowest speed. (Roughly 500 RPMs.) I polish around 1,200 RPMs. Regards, Bob
G'day Bob, your presentation is excellent and very helpful I have only turned a few pens using acrylic as personally I do have a little bit of fear of it however they really do look good and people sometimes prefer them over timber, it's not necessarily what I like but what people will pay for.... These last two videos on acrylic have been extremely helpful.... I am not sure if in America you can buy a product called Brasso (for polishing brass) this product is super good for finishing pens and very cheap in comparison to the ones that are sold by the Woodturners suppliers added to this I probably do a little bit of overkill I finish up with a once a year car polish on my CA finish, guessing the Brasso and car polish would work on acrylic also....Bob thank you for sharing your knowledge I look forward to your next video, Tim.
Thank you for the comment Timothy, We can get Brasso and I am just about empty on my One-Step polish. I'm always looking for new, translation: cheaper, products that perform just as well as what I am currently using. I think on your recommendation, I'll pick up a can of Brasso and try it out. Thank you. Also, I don't think there is such a thing as going overboard on finishing. The finish is what catches the customers eye. With all your doing, your pens must look amazing and I'll bet the finish lasts. I'm always interested in how other turners finish their pens and how long the finish lasts. It the pen looks good for a long time, it catches more eyes and that can translate into referrals. Keep those high standards, they pay off. Regards, Bob
Zero! I just love pens & would love to be able to make some fountain pens and regular pens out of acrylics. I used to be a construction mgr & I used to do some wood working with my mom & stepdad, but it was more along the lines of making stairs to go up the side of their mountain I. East Tennessee & using a jigsaw to cut out Xmas and holiday decorations, etc. I was wondering if there is a mini lathe that I could get just for pen making? I know I would need a pen mandrel too. I’m disabled & on a fixed income so I have limited resources now & limited physical abilities. I appreciate any advice you can give on materials & equipment. We have a local artist/craft type collective, but as I’m immune compromised I haven’t ventured out to see what equipment they have. Thx again fir any info you can impart.
Hello Sherri, Penn State Industry has a starter set: www.pennstateind.com/store/KWL-10SSB.html This is about as cheap as you can get into the hobby unless you purchase used from someone. It is a lathe 10” and not a great deal is power so you would be limited to smaller projects only like pens. It does come with pen mandrel, tools, some kits, and blanks (wood). But will turn acrylics just fine. Before you buy check out their website www.pennstateind.com sign up for the newsletter and they give a 10% discount. I believe it’s good on lathes as well. They also sell kits and acrylic blanks. Regards, Bob
+Mark Vernon Yes, the set I have is from Penn State and called pen finishing pads but there the same thing as the Micro Mesh brand. I think MM might have 2 additional grits. Regards, Bob
Just curious, how long did it take to turn the blank from start to finish? I’m new to turning pens and it seems to take forever. I do understand there’s a learning curve. Thank you.
I can turn a pen like this start to finish in 30 Minutes. When I started it war 1.5 to 2 hours. Don’t worry about speed worry about quality, The speed till come with experience.
@@RJBWoodTurner Thanks. Maybe I’m doing better than I thought. Counting cutting the blank to assembly I can probably do acrylic in about 50 minutes. Wood is faster. Cuts faster when turning. Enjoyed your video. Thanks for sharing and the advice.
Great video again Bob, like many others, I use the spindle roughing gouge for the majority of my acrylic pen turning, I tend to use a large size for most of the work as the surface cutting area is greater and go to something smaller when I am near to the required bushing size. I have always tended to use my micromesh dry but will give the wet sanding a go next time as I have a large order for acrylic pens to make. Meant thanks. John.
Thanks John, I really think you will like using the MM wet. It is definitely messy but there is no dust and less heat build up so that dust doesn't melt back onto the blank. I scarred more than one acrylic blank before I figured that out. Just be sure to wipe the blank off between grits and you will have beautiful results. Regards, Bob
2 questions: What speed are you running at to turn the acrylic on the HF lathe. Just curious for my new one. Also, Did you drill out the end of your nylon on your press so the nib sets in like that? Mine is solid.
Hey Dean, I ran at full speed to turn and the slowest speed to sand. My press came with a hole in the center. It makes it so much easier to hold the pen straight. Regards, Bob
I just may have to drill a hole in mine. That looks very convenient. Thanks for the lathe info. I ran my old one just below full speed. I think it runs up to 3200-3500 at full speed. Should have the new mandrel tomorrow, I hope. I'm sitting on 11 backed up orders right now :/ Thanks for the reply Bob!
Eleven orders is great! It sure stinks having to wait on parts when you know you could be turning. It would be nice if we had local options for parts and accessories instead of having to order everything. If it were me, I think I'd try to modify that press with a hole. It is so much more convenient for lining pen parts up. Maybe you could get a spare piece of HDPE instead of drilling your main press piece. Regards, Bob
Yes, a local option would be amazing! I've looked everywhere near me and there is nothing, unfortunately. On the press; I think that's what I'm going to do. It just makes sense. I have a small piece of wood I lay over it that I used a countersink bit on, to put the perfume applicators together. It makes it much easier with the indent.
I also like to use a piece of cardboard on the opposite end of the press to avoid damage to the pen parts. I might try replacing or sleeving the metal pad with HDPE. Regards, Bob
Hello Eric, Sorry for the delay, I’ll bet you thought I forgot about you. Just been real busy. I made a list in the video description of all of the finishing products I use and included a link to them. Regards, Bob
Hello Luke, I did when I first started turning acrylics. It’s all about a sharp tool and the proper cutting angle. It does take a little practice but I know you will get there. Chick up a piece of scrap wood and practice riding the bevel turn just barely turn into the wood to start the cut. Many people turn to much of the tool into the surface when the first start. Practicing like his will give you a lighter touch and you’ll learn the tool. Regards, Bob
Kylie, I'm starting to agree with you. I've turned a few more pens since the video and the control I have with the roughing gouge is amazing. As long as I keep it sharp, I plan to keep using it. Regards, Bob
+icespeckledhens Wood blanks 5 to 10 minutes, acrylics maybe 20 minutes. The turning is the easiest and quickest part. It's all the prep work and finishing that takes the time. Regards, Bob
Thank You so Much If I have success I will send picture, it will a bit I'm sure Roger On a side note, I will also try to cast my own blanks ,if you any video's on this topic please let me know Thanks Again
Just subscribed to your channel. Now I have a question. For every different kind of pen do I have to buy different bushings or are there bushings that fit a variety of pens? I would hate to have one set of bushings for every different style of pen that is out there.
+frehleycomet good morning, For the most part, there are special bushings for each kit, especially the specialty kits. I started with Slimlines and if you watch real close, there are several kits that can use the standard 7mm bushings. Regards, Bob
+codinskie It could be the type of acrylic your using. Inlace Acrylester and polyester resins are brittle. The best thing you can do is use a razor sharp tool and a very light cut. You can sand the edges off the blank before starting to turn and that may help too. Carbide is very aggressive if that’s what your using. Twist the cutter to a 45 degree angle witch will present a much smaller cutting surface to the the blank more like a skew. Regards, Bob
Hello Heather, I usually turn somewhere between 2,800 and 3,000 RPMs. I slow to between 500 and 700 RPMs for sanding then I speed back up to 1,000 to 1,200 for polishing. I hope this helps, Regards, Bob
I know this is old but maybe you can still shed some light on an issue. Everytime I use a gouge on acrylic and at about the time I get to turning it flush to the bearing I chip the blank. Have you ever had an issue with this?
Make sure there is no slop in the hole you drilled for the tube. The gap will cause it to chip out like that. Sharpen your gouge before the finishing cuts, a dull tool will catch. Make sure you’re riding the tool bevel then lift and cut, going in to aggressive can cause issues. That’s all I can think of without seeing your technique. I hope this helps. Regards, Bob
@@RJBWoodTurner Thank you for answering, gives me some thing to look at....I don't think it's the tool...I'm almost thinking its a bad bushing. I have tried a few different tools tonight. 5 different blanks....couple different techniques and same results. Blow out. I thought it was my technique on the right side but then I changed the bushings to the opposite sides and same result but on the other side. It's frustrating to get that far and so close to finish and then it happens. Going to try another pen kit to make sure and get my confidence back up! Great channel!!
Between 2,500 and 3,000 RPMs for turning and between 500 and 800 for sanding. Even slower for the sanding would be better but that's as slow as my lathe will go. Regards, Bob
+faszfafawe1 No, For a wood pen, I sand to 600 girt then use Denatured alcohol to clean the wood. Once it all evaporates I apply approximately 5 coats of thin C/A, then several coats of medium C/A. At this point the finishing is similar with one exception, I don't sand as aggressively with the Micro Mesh pads, the coats of C/A are to thin to handle it. Then polish both the same way. I don't use sand paper on acrylics, I go straight to the Micro Mesh. I hope this helps. Regards, Bob
I want to get like this blue thing 0:27 Can you tell me in any store i can get this?? Can I get it from the building shops, for example? Carpentry? I'm from the Middle East so i dont see her? I want make gift for my frend she's calligraphy 👍
Thank you, This new YT tool is showing me all the comments I missed over the years. Apologies for not responding sooner. I hope you're still watching and enjoying my videos. If you haven't checked out the channel for a while, please stop by and see some of the newer videos. I've made a bunch of the over the years. I use the same grits as I do for a wood blank. Then I use Micro Mesh to polish all the fine scratches. Regards, Bob
Hello Brad, I currently live in Mt. Vernon, IN. There are two Mt. Vernon's, I live in the southern most, right at the toe of the state where IN, IL, & KY meet. Regards, Bob
+Basement Wood Werks Make sure you haven't tightened the tail stock so tight that it's bowing the mandrel. Make sure your drilling perfectly straight through the blank as well as barrel trimming it square. Otherwise it will be off center. Put your lathe on the lowers possible speed, start it and bring the tail stock up. That will align the mandrel. Tighten it down then speed the lathe up and lay your tool onto the mandrel. It it vibrates your out of alignment. Adjust until it's smooth before you start turning. Regards, Bob
Very nice tutorial full view and like
All the best
Yiannis (Athens Greece)
Thank you Yiannis.
Regards,
Bob
I subscribed because I like how methodical and willing to show “I am not perfect” attitude. Your humble spirit and excellent teaching will guide me today as I turn my first acrylic pen!.
Thank you Larry.
I appreciate that.
Regards,
Bob
Been out of pen turning for a while. I used a roughing gouge for a blank today but was intimidated by getting close to the bushings. You mentioned a sharp tool which is a must. You carefully worked toward the end to trim the blank to the bushing size. Answered my questions for the final cuts. Thanks.
I’m happy my video was helpful.
Regards,
Bob
@@RJBWoodTurnerSubscribed as I see a number of useful topics.
Thank you.
Regards,
Bob
I have not turned an acrylic pen but you have given valuable information of the procedure.
thanks
James
+icespeckledhens Thank you James.
Regards,
Bob
I haven’t done acrylic yet. I’m stuck on wood blanks but I think it’s getting close for me to try it. Thank you for the video. I’ll be watching.
It’s as easy to turn as wood. 😀
Regards,
Bob
Simple and easy. Thanks for your video.....
Thank you Patrick.
Regards,
Bob
Pretty pen, I have my new lathe coming next week look forward to learning how to turn pens.
Congratulations. 😃
Thanks brother. This is exactly what i needed
Thank you,
I’m happy it helped.
Regards,
Bob
Bonsoir,
Je suis toutes vos réalisations et j’apprends beaucoup de choses. Je débute dans le tournage et j’admire votre travail qui me procure un tas d’idées. Merci encore à vous.
Cordialement
Jean-Marc FEIEREISEN
Thank you and welcome to the pen turning hobby.
Regards,
Bob
Thank you, Thank you. I'm turning acrylic pens for gifts and this is my first time with acrylic. The first two were turned with a skew per instructions received with the blanks and they took forever. Then I saw your video. You have saved me hours at the lathe. Now I enjoy turning acrylic as much as wood blanks. I look forward more videos.
Thank you Marcus,
I'm glad my video was helpful. Have fun making all those gift pens. The best part about giving a pen as a gift is the reaction and the amazement the recipient gets when they find out you really made it. I love that.
Regards,
Bob
Good job Bob, great pen, All the best Harry,
Harry Watts Thank you Harry, It was fun to make, hopefully it will sell quickly at the craft show and I will have $'s for more turning supplies.Regards,Bob
RJBWoodTurner your pens look great, I Hope you do well at the craft show Bob, regards Harry
Thank you Harry.
Regards,
Bob
Nice pen. Have to try that Dutchess pen, the blue and chrome looks great together .
Thank you,
My wife loves chrome pens and the color blue, she tried to take possession of that pen.
Regards,
Bob
That pen press is so impressive! All of the work you did in this video was impressive and the info helpful and encouraging. Thanks!
Thank you,
Regards,
Bob
Awesome turning Bob, great idea using the gouge. I like the skew but I'm going to give the gouge a try.
You've spoiled us this week with 2 videos, thank you for spending your valuable time showing us these and inviting us to join you in your shop.
Looking forward to the next visit.
Regards
Bob.
Plaustrum Crafts Bob, I don't normally use the roughing gouge for the entire process. I was turning antler and had to sharpen before I completely trued it up. Once I sharpened the gouge, it cut like hot butter so I attempted to finish the pen with it and it worked out ok. If the gouge isn't really sharp, it can cause little chips in the blank.Regards,Bob
Another great video Bob thank you, 5 years back so hopefully duchess pens fit easier :).. Really enjoy the videos and with a fair wind and a bit of luck "should" turn my first acrylic pen in the morning.. All your videos Ive watched so far are showing me the skills.. now need to put what I have seen into practice.
Thank you Buster, best of luck on a good clean turn.
Regards,
Bob
Ive tried turning acrylic 3 times in my life, all 3 were pen projects, and i ripped massive chunks off every single one, while using a carbide tool. I have left the pen kits sitting for at least 5 years, and I think I wanna give it another go. I think this is more a matter of you being a talented and skilled craftsman as opposed to turning acrylic being an easy task.
Try turning the carbide tool at a 45 degree angle instead of presenting it straight into the turning. The less of the blade to contact the turning the better. Carbide is really aggressive.
Regards,
Bob
@@RJBWoodTurner Thank you for your advice! I'll try this next time a lathe is available to me!
Great demonstration and very nicely presented.
+no name Thank you.
Regards,
Bob
I enjoy the detail in your explanation of what your doing. Thanks!!
+GordonHVAC Thank you Gordon.
Regards,
Bob
Thanks for the demo you made that look so easy now it's time for me to try.
Thank you Robert,
It really isn’t bad at all.
Redards,
Bob
Great job with the pen Bob, My wife was throwing out a small old oven tray and i use that on the bed of my lather when Micro Meshing or C/A glueing and polishing and it stops anything getting on the bed of the lathe..
cheers Mick!!
Mick Burns I am on the look out at rummage sales and thrift stores for something to repurpose for this task. I usually use a paper towel but they get damp and I want to keep the bed as dry as possible. I oil my bed periodically to make it a bit more resistant to moisture but avoidance is the key.Regards,Bob
Very good Demo Bob - I've been wanting to get a lathe for some time, I think I would enjoy turning these
Nick,
It usually takes one pen to figure it out. After the first one you know what to do and just keep trying new things and improving your skills. It's a very addicting hobby.
Regards,
Bob
Thanks for showing me how you makes these great pens!
You're welcome Ron,
If you ever purchase a lathe, you'll get hooked on pens pretty quick. They are fun to make, have hundreds of choices, sell well, and make excellent gifts. Come to think of it, what are you waiting for? :^)
Regards,
Bob
I don't need a large lathe, do I? I see that Harbor Freight has one with a motor mounted underneath the spindle.
If all you plan to make is pens and small stuff, then a small lathe like that will work just fine, that's what I have and all I use it for is pens. Once you start turning, you'll want to turn bigger stuff.
I think a small inexpensive lathe is the way to go, spend your money on quality tools. As you sell pens, it will pay for that lathe and allow you to save for a bigger on.
That's what I'm doing. I want one like Carl Jacobson has. Man, that's a lot of pens. :^)
Regards,
Bob
Pretty cool. I'm about 45min southeast of you in Harrisburg, Illinois. Nice little town up there. Beautiful on the river in the spring.
I work with a guy from Harrisburg. Do you know Jason Futch?
Regards,
Bob
Don't believe I know him.
I asked Jason and he said he didn't know you either but if he said if he saw you he might recognize you.
Regards,
Bob
Another great video! Thanks Bob!
Thank you Fredrik,
I received the blanks you sent me yesterday. I am looking forward to turning the moose and reindeer. Thank you again got your generosity.
Sincerely,
Bob
Well well well I have never used a skew I always use a roughing gouge. I think mine is a bit smaller than yours, which makes it easier to handle. I started with acrylic so far In have not made a wood pen. I have just got my hands on some wood offcuts so I may discover a whole new way of doing things. Have a lovely day.
Thank you Alan,
I’m happy my video was interesting and useful to you.
Regards,
Bob
Great video Bob, the pen looks awesome.
Thank you Carl.
That's so beautiful
Thank you Misty.
Regards,
Bob
Hi again Bob, I went through your video again and just a quick note. I polish acrylic with the lathe at a very high speed. It builds up a higher gloss finish.
Dan,
I only slowed mine down because I built up to much heat one time and marred a blank.
Regards,
Bob
I had an old plastic bowling ball at home and cut it and made a pen out of it.. Not an easy task because I didn't have a great saw to cut the bowling ball with but it ended up pretty cool. Made it for a bowling friend of mine.
+playerof8 That is cool,
Newer bowling balls have a core and the plastics is only maybe 1/2" thick. They stink for turning.
Bob
Great Video, thanks
Thank you Michael,
Regards,
Bob
Great job Bob. That's the same and only tool I use on pens, just like you did there Bob, then I sand. It is like you said it has to be sharp. On bowls I do not use a bowl gouge but the carbide cutting tools, they work great.
Piety Ridge Dan Haniff Thanks Dan, Since it worked do well, I have been using it quite a bit lately. As long as I keep getting good results, I think I'll stick with it. I haven't got into bowl turning. I just got a Nova chuck so that puts me one step closer but the real concern I have is does my lathe have the oomph to turn a small bowl. I will find out soon. I'll probably video it and show you guys the success / failure.Regards,Bob
I love turning acrylic, and I only use a spindle gouge, I find that a skew will dig in further. Great video
+Damian Curtis Thank you Damian,
I really like the co tell I have with a spindle roughing gouge.
Regards,
Bob
that is amazing. so beautiful
Thank you Tyinisha.
Regards,
Bob
+RJBWoodTurner so I am an artist and I was wondering do u make sketch pens
Tyinisha,
I have not made a sketch pencil before. I will look to my supplier to see if they have anything g like that available.
Regards,
Bob
Super video. Thanks for doing it.
You are welcome,
I turn quite a lot of acrylic so if you have any questions I'd be glad to attempt to answer them.
Regards,
Bob
Great video after all these years! I just used the roughing gouge tonight for an acrylic pen. I use it all the time now. I switched to this from the carbide tips I had, they kept gouging the blanks and ripping chunks out of them no matter how I tried to change it up. I thought I would get it after a few dozen pens but nope, I can't swing it so I'll just use what works for me for now. Maybe its my technique who knows.
I used it for several years. Now I use a Skew.
As long as you keep it sharp it will work just fine.
Regards,
Bob
Thank you for a great video.
+Frank Perry Thank you Frank.
Regards,
Bob
We are new to turning acrylic. We have watched several videos on "how to"... The one thing that we have not been able to find is information on how fast to run the lathe when turning. Any thoughts or suggestions would be a great help. Excellent video. Thanks for sharing your knowledge.
I primarily turn pens and wether it's wood or acrylic, I turn at the highest available speed my lathe offers. Larger items should be turned at slower speeds.
Regards,
Bob
Great vid Bob, thanks. Mounted my first piece of acrylic today and just turned it round, sanded and polished to see what would happen. No great dramas, skew worked lovely but I need to spend more time sanding with the lower grits, I have a few marks. I am going to re-mount it tomorrow and finish the job. :)
That sounds great Collin,
While sanding tomorrow, turn your lathe to its lowest speed and dip the sand paper in water. It will cut down on the dust and the heat. The heat / dust combination will scar the acrylic.
Let me know how it turnes out.
Regards,
Bob
Thanks Bob. Doesn't it STINK!!! I turned two this morning, a pen and pencil Sierra pair. I have learned a few things:
1. Loving my new skew.
2. Sharp tools!
3. It marks soon easily!
4. Wet sanding makes all the difference. I have the same lathe as Mike Waldt so can go pretty low on speed. 50RPM was a little too slow so settled at 250 and wet sanded.
5. You have to work much harder to ensure that you remove all the scratches. I have a single scratch on one of the pens that I have managed to hide under the pen clip. :)
I will persever with acrylics (and will get some white primer paint) as I think they will be popular, but I much prefer a decent figured wood I think.
Thanks again for the video and taking the time to chat with me. :)
Coll
Collin,
Instead of sand paper, purchase some Micro-Mesh pads. They are abrasive pads that you also dip into water to use and they will really cut down no the scratches while at the same time polishing your acrylic. Then I use a scratch removing polish for the really fine scratches and to give the pen an amazing shine. You will love the difference it will make on all your acrylic pens.
Regards,
Bob
Yep, got those. :) "Sanded" to 600 and then onto the micro mesh to 12,000. Unfortunately my tool skill isn't yet good enough to start straight on the micro mesh. :(
Coll
If you have the MM pads, don't use sand paper at all. Make a very light & smooth finishing cut on your blank, sometimes I sharpen the tool prior to that cut, then go straight to the MM. It's faster and you don't have to worry about repairing and damage from the sand paper. Give that a try and see if it works for you.
Regards,
Bob
Nice wood on that work bench
😃
Nice video! Any special precautions drilling the acrylic blank? I was thinking perhaps a split point drill and leaving a little more length than normal for wood just to allow for chip out. Would appreciate your input.
When I’m worried about chip out, I leave the blank whole and mark the bit with a piece of tape for depth. Drill a little at a time. 1/2” to 1” then stop, clear the bit and test how hot it is. If it’s hot to the touch pause and let it cool before continuing. Once the blank is drilled then cut it to length. You get perfect entry and exit holes that way.
Regards,
Bob
@@RJBWoodTurner Thanks Bob! My first attempt with acrylic turned out great!
@@dennismcdonald8197 acrylics are a pleasure to turn once you get the hang of turning the material. Congratulations.
Good job Bob. I have found that I only use a roughing gouge for pens now as I can get a better finish and can use the wings to sneak close to the bushings. I'll do a video soon to show you how I've ground the gouge to use it for pens.
Best Wishes, Brendan.
baconsoda Thanks Brendan, I'll look forward to seeing the grind. I usually use a skew but this worked very well and was quick. I also can worry less about catches and focus more in the pen.Regards,Bob
Thanks for the great videos. You explain each detail so well and as a new pen turner it is so helpful. I noticed that you use a piece of cardboard on you pen press to protect the pen from damage. Did you ever consider making something permanent to affix to your pen press (wood, leather, nylon ?) Once again, thanks for all the great tips.
Thank you Thomas
Yes that cardboard is to protect the pen. I really do need to make something more permanent. I have some HDPE that I could probably drill out and use.
Regards,
Bob
great video bob,,,i have been using a skew on wood but it seems like it is much harder to cut the acrylic,,,i kinda like the skew on wood it leaves a much better finish,,i was hoping to use it with acrylics,,maybe I just need to work at it,,lol,,, I wish you would post another video using a skew if that's possible
Thank you Jeff,
I don’t use the skew often. With the sharpening set up I have, I can get my gouge really sharp and it leaves and amazing finish.
Regards,
Bob
lol,,im watching your video at this moment about you buffing system,,can you believe it,,lol
You’re a glutton for punishment, LOL.
Regards,
Bob
I have seen these sanding pads in store, and have wondered how long they would last.They are not cheap here in australia. Very helpful video. I am just starting out.
+Graham Faravoni Thank you Graham,
If you can get a nice smooth finish cut on your pen, they last for a long time. If your finishing cut is rough and you have to sand more, they go quickly. There about $13.00 US so I think there pretty expensive here too but there worth it.
Bob
One of the cheapest aspects of pen making is the cost of sandpaper or sanding pads. A saying circulates, "Use sandpaper like someone else is paying for it." Have fun and be safe.
Schöner Stift Bob, vielen Dank für die Vorführung!
Tiroler
Tiroler Drechsler Thank you very much, I appreciate you watching an commenting.Regards,Bob
Thoroughly enjoyed the video but what speed did you turn it at with the roughing gouge?
That was my old lathe so I turned at 2,800 RPM on that one.
Regards,
Bob
One trick I do when using the pen press is to use the turn dial to apply the pressure instead of the arm. Keeps from going to far as well.
Great idea,
I wish my press had that capability.
Regards,
Bob
Very nice pen, i love blue colour.
wish i had seen this video before i turned my first acrylic pen. But i did just what you did, i used the rough gauge and the last stroke with av skew.
After sanding and polish it looked ok. But when i pressed it together i looked weird. I pt i wrong together and i cante manage to take it apart again. I have seen video from you how to take it apart but cant do it properly.
Excuse my english.
Regards
Hans olav
Your English is wonderful Hans. Thank you for watching and commenting.
Regards
Bob
Another great video, I use Autoglim acrylic polish it leaves a fantastic shine.
+Rex Oats Thank you Rex.
Regards,
Bob
I would like to ask you on what tool I can use to turn the Rocklers piano key blank ? I glued the tube in with 5 minute epoxy and glued the keys in with thin super glue then leveled the keys to the blank by hand sanding before mounting to the mandrel. Can I use the carbide tip tools that Rocklers sell .15:115:11
I’ve never seen that blank so I’m not really sure. Carbide can be used to turn most blanks. I prefer the skew for the finish it gives. It might be best to call Rockler and ask them what they recommend.
Regards,
Bob
Hey Bob, It looks great. My first turning with acrylic did not come out well. I had both slim line blanks almost turned down, then they both exploded. The blanks were hard acrylic of the American Flag. My speed was around 1200 rpm, I am not sure if they should be turned at a faster speed. I use the carbide tools for turning. Any suggestions to finish the blanks without exploding, cause that can get expensive. Thank you Ron USCG MKC RET
Hello Ron,
I usually turn acrylics a little quicker, maybe 3,000 RPMs.
They usually explode because there’s a gap between the hole drilled in the blanks and the tube. The glue doesn’t fill that and even if it did, you’d see glue and not blank because the blank
Would turn away.
The entry hole is always the issue so leave the blank a little long and try drilling from the other end on a themed blank. For a regular blank leave it long and test the tube fit. Cut off the larger hole and the entry end.
Regards,
Bob
@@RJBWoodTurner Thank you Bob, I turned at a little 4000 rpm. I have had two work out ok and two that came apart. Is there a difference in the resin that is used?
Bob,
Thank you for all your informative videos. I've turned a few pens but I'm still not sure at what speeds to perform each of the operations (turning, sanding, polishing etc).. And also does one use different speeds for different blanks (soft or hard wood, acrylic. etc). Is there a chart somewhere showing this info.
Keep up the great work producing these videos.
Hank Shannon
Hello Hank,
Everyone develops their own feel for speed.
I turn all pens regardless of material with the lathe wide open. (For my lathe roughly 3,000 RPMs.)
I sand and finish at the slowest speed. (Roughly 500 RPMs.)
I polish around 1,200 RPMs.
Regards,
Bob
Thanks Bob
That is very helpful, I'll try those values as a starting point. Stay safe during the pandemic.
Hank
G'day Bob, your presentation is excellent and very helpful I have only turned a few pens using acrylic as personally I do have a little bit of fear of it however they really do look good and people sometimes prefer them over timber, it's not necessarily what I like but what people will pay for.... These last two videos on acrylic have been extremely helpful.... I am not sure if in America you can buy a product called Brasso (for polishing brass) this product is super good for finishing pens and very cheap in comparison to the ones that are sold by the Woodturners suppliers added to this I probably do a little bit of overkill I finish up with a once a year car polish on my CA finish, guessing the Brasso and car polish would work on acrylic also....Bob thank you for sharing your knowledge I look forward to your next video, Tim.
Thank you for the comment Timothy,
We can get Brasso and I am just about empty on my One-Step polish. I'm always looking for new, translation: cheaper, products that perform just as well as what I am currently using. I think on your recommendation, I'll pick up a can of Brasso and try it out. Thank you.
Also, I don't think there is such a thing as going overboard on finishing. The finish is what catches the customers eye. With all your doing, your pens must look amazing and I'll bet the finish lasts. I'm always interested in how other turners finish their pens and how long the finish lasts. It the pen looks good for a long time, it catches more eyes and that can translate into referrals. Keep those high standards, they pay off.
Regards,
Bob
what brand resin do you recommend? Im having trouble with cheap resin not curing hard after 1 week.
I like Alumilite, it’s forgiving.
Regards,
Bob
Great video, thank you
Thank you Pete.
Regards,
Bob
greate pen Bob nice job with the gouge
All the best Robbie
Robbiethewoodturner Thank you Robbie, I was just having some fun and maybe showing off a little.Regards,Bob
Exactly which tools would a newbie need to start turning acrylic pens?
Hello Sherri,
You can use the same tools as you would use for wood.
What tools do you have currently?
Regards,
Bob
Zero! I just love pens & would love to be able to make some fountain pens and regular pens out of acrylics. I used to be a construction mgr & I used to do some wood working with my mom & stepdad, but it was more along the lines of making stairs to go up the side of their mountain I. East Tennessee & using a jigsaw to cut out Xmas and holiday decorations, etc. I was wondering if there is a mini lathe that I could get just for pen making? I know I would need a pen mandrel too. I’m disabled & on a fixed income so I have limited resources now & limited physical abilities. I appreciate any advice you can give on materials & equipment. We have a local artist/craft type collective, but as I’m immune compromised I haven’t ventured out to see what equipment they have. Thx again fir any info you can impart.
Hello Sherri,
Penn State Industry has a starter set:
www.pennstateind.com/store/KWL-10SSB.html
This is about as cheap as you can get into the hobby unless you purchase used from someone.
It is a lathe 10” and not a great deal is power so you would be limited to smaller projects only like pens.
It does come with pen mandrel, tools, some kits, and blanks (wood). But will turn acrylics just fine.
Before you buy check out their website www.pennstateind.com sign up for the newsletter and they give a 10% discount. I believe it’s good on lathes as well. They also sell kits and acrylic blanks.
Regards,
Bob
Are you using the same micro-mesh pads used to polish out a CA finish? Great demo
+Mark Vernon Yes, the set I have is from Penn State and called pen finishing pads but there the same thing as the Micro Mesh brand. I think MM might have 2 additional grits.
Regards,
Bob
Just curious, how long did it take to turn the blank from start to finish? I’m new to turning pens and it seems to take forever. I do understand there’s a learning curve. Thank you.
I can turn a pen like this start to finish in 30 Minutes.
When I started it war 1.5 to 2 hours.
Don’t worry about speed worry about quality,
The speed till come with experience.
@@RJBWoodTurner Thanks. Maybe I’m doing better than I thought. Counting cutting the blank to assembly I can probably do acrylic in about 50 minutes. Wood is faster. Cuts faster when turning. Enjoyed your video. Thanks for sharing and the advice.
Great video, thanks. Should you have pushed the transmission in too far how would you fix that? Thanks.
I use lunches to remove the trans then I reseat it.
Regards,
Bob
Thanks
Whoops, that was suppose to say punches. LOL.
Thanks, I kinda figured that one out but I appreciate the correction.
Great video again Bob, like many others, I use the spindle roughing gouge for the majority of my acrylic pen turning, I tend to use a large size for most of the work as the surface cutting area is greater and go to something smaller when I am near to the required bushing size. I have always tended to use my micromesh dry but will give the wet sanding a go next time as I have a large order for acrylic pens to make. Meant thanks. John.
Thanks John,
I really think you will like using the MM wet. It is definitely messy but there is no dust and less heat build up so that dust doesn't melt back onto the blank. I scarred more than one acrylic blank before I figured that out. Just be sure to wipe the blank off between grits and you will have beautiful results.
Regards,
Bob
I'm new to turning, only been doing it 1.5 years and I don't think I've ever used a slew...
I didn’t use a skew for the longest time. I finally gave in about a year ago and once I leaned how to handle it, I’m loving the skew.
Regards,
Bob
2 questions:
What speed are you running at to turn the acrylic on the HF lathe. Just curious for my new one.
Also, Did you drill out the end of your nylon on your press so the nib sets in like that? Mine is solid.
Hey Dean,
I ran at full speed to turn and the slowest speed to sand.
My press came with a hole in the center. It makes it so much easier to hold the pen straight.
Regards,
Bob
I just may have to drill a hole in mine. That looks very convenient.
Thanks for the lathe info. I ran my old one just below full speed. I think it runs up to 3200-3500 at full speed. Should have the new mandrel tomorrow, I hope. I'm sitting on 11 backed up orders right now :/
Thanks for the reply Bob!
Eleven orders is great! It sure stinks having to wait on parts when you know you could be turning. It would be nice if we had local options for parts and accessories instead of having to order everything.
If it were me, I think I'd try to modify that press with a hole. It is so much more convenient for lining pen parts up. Maybe you could get a spare piece of HDPE instead of drilling your main press piece.
Regards,
Bob
Yes, a local option would be amazing! I've looked everywhere near me and there is nothing, unfortunately.
On the press; I think that's what I'm going to do. It just makes sense. I have a small piece of wood I lay over it that I used a countersink bit on, to put the perfume applicators together. It makes it much easier with the indent.
I also like to use a piece of cardboard on the opposite end of the press to avoid damage to the pen parts.
I might try replacing or sleeving the metal pad with HDPE.
Regards,
Bob
Great video thank you!!!
Matt Sosnowski Thank you Matt.Regards,Bob
Thank so much!
Your welcome.
Regards,
Bob
Nice looking pen!
Thank you Jon,
I think my daughter claimed that one shortly after the video posted.
Regards,
Bob
Also, how do you oil the bed of your lathe? Thanks for the video!
I use WD40 and 0000 steel wool. Then I wipe it with a paper towel.
Regards,
Bob
@@RJBWoodTurner thanks!
Great Video.
What size gouge?
What angle to you sharpen it to?
Hello Jon,
I’d recommend using a Skew instead of a gouge. I like the 3/4” Robert Sorby.
Regards,
Bob
What speed do you run your lathe while turning?
I usually turn between 2,500 and 3,000 RPMs.
I sand between 500 and 800 RPMs.
I polish between 1,100 to 1,200 RPMs
Regards,
Bob
Hi Bob! What brand of polish do you prefer to use on acrylics? Thanks in advance. EJ
I like Renaissance Wax but truthfully if you want to save some money get Plast-X headlight polish from Walmart. It works great!
Regards,
Bob
@@RJBWoodTurner Thanks Bob, I'll definitely try that...Eric
Hello Eric,
Sorry for the delay, I’ll bet you thought I forgot about you. Just been real busy.
I made a list in the video description of all of the finishing products I use and included a link to them.
Regards,
Bob
Hi Bob
Getting ready to turn my first acrylic blank can you advise the RPM
I should use, my lathe goes to 3800 RPM
Thanks Bob
Roger
+Roger Fortier Hello Roger,
I turn pen blanks, Wood or acrylic, wide open. Then I sand at the slowest speed the lathe will go.
Regards,
Bob
+Roger Fortier Buy a cheap blank to turn for experience before turning the real deal.
Use a little bit of fine pumice mixed with beeswax shine is amazing
Thanks Keith,
Never thought of that trick. 😃
Regards,
Bob
Do you get a lot of chatter when your turning? I just turned an acrylic pen and had that problem
Hello Luke,
I did when I first started turning acrylics. It’s all about a sharp tool and the proper cutting angle. It does take a little practice but I know you will get there. Chick up a piece of scrap wood and practice riding the bevel turn just barely turn into the wood to start the cut. Many people turn to much of the tool into the surface when the first start. Practicing like his will give you a lighter touch and you’ll learn the tool.
Regards,
Bob
I only use the roughing gouge when turning pens. I have found its way easier to use then anything else.
Kylie,
I'm starting to agree with you. I've turned a few more pens since the video and the control I have with the roughing gouge is amazing. As long as I keep it sharp, I plan to keep using it.
Regards,
Bob
what type of rpms are you running to turn acrylic? I am just starting my journy into pen turning so watching every video i can find. Thank you!
I turn at 3,000 RPMs.
Regards,
Bob
Thank you!
How long does it take you to turn a square pen blank down ready for sanding?
thanks
james
+icespeckledhens Wood blanks 5 to 10 minutes, acrylics maybe 20 minutes. The turning is the easiest and quickest part. It's all the prep work and finishing that takes the time.
Regards,
Bob
thanks,
icespeckledhens wA
Hi Bob
Would you recommend carbide tipped cutting tools for acrylic
Thanks
Roger
+Roger Fortier I don't use carbide but I have many friends who do and they turn acrylics so I'd say it should work just fine.
Regards,
Bob
Thank You so Much
If I have success I will send picture, it will a bit I'm sure
Roger
On a side note, I will also try to cast my own blanks ,if you any video's
on this topic please let me know
Thanks Again
+Roger Fortier Just purchased a pressure pot tonight. I'll be learning and making videos soon.
Regards,
Bob
Just subscribed to your channel. Now I have a question. For every different kind of pen do I have to buy different bushings or are there bushings that fit a variety of pens? I would hate to have one set of bushings for every different style of pen that is out there.
+frehleycomet good morning,
For the most part, there are special bushings for each kit, especially the specialty kits. I started with Slimlines and if you watch real close, there are several kits that can use the standard 7mm bushings.
Regards,
Bob
How long to the pad last before you need to buy new ones?
If you’re not getting aggressive, they last a very long time. I think the water helps because it limits the heat build up.
Regards,
Bob
I start and finish with a roughing gouge most the time for pens.
Thank you, I do too.
Regards,
Bob
what RPM do you turn resin pen blanks?
I like to turn fast. 3,000 RPMs.
Sand at 700
Polish at 1,100
These are just my preferences.
Regards,
Bob
I’m having trouble with the acrylic trying to chip and shatter any suggestions
+codinskie It could be the type of acrylic your using. Inlace Acrylester and polyester resins are brittle. The best thing you can do is use a razor sharp tool and a very light cut. You can sand the edges off the blank before starting to turn and that may help too. Carbide is very aggressive if that’s what your using. Twist the cutter to a 45 degree angle witch will present a much smaller cutting surface to the the blank more like a skew.
Regards,
Bob
At what speed do you have your lathe?
I turn at 3,000 RPM
Sand and apply finish at 500 RPM
Polish at 1,100 RPM.
I hope his helps.
Regards,
Bob
@@RJBWoodTurner Thanks.
What rpm setting did you use to turn this pen?
Hello Heather,
I usually turn somewhere between 2,800 and 3,000 RPMs.
I slow to between 500 and 700 RPMs for sanding then I speed back up to 1,000 to 1,200 for polishing.
I hope this helps,
Regards,
Bob
Thank you!
I know this is old but maybe you can still shed some light on an issue. Everytime I use a gouge on acrylic and at about the time I get to turning it flush to the bearing I chip the blank. Have you ever had an issue with this?
Make sure there is no slop in the hole you drilled for the tube. The gap will cause it to chip out like that.
Sharpen your gouge before the finishing cuts, a dull tool will catch.
Make sure you’re riding the tool bevel then lift and cut, going in to aggressive can cause issues.
That’s all I can think of without seeing your technique. I hope this helps.
Regards,
Bob
@@RJBWoodTurner Thank you for answering, gives me some thing to look at....I don't think it's the tool...I'm almost thinking its a bad bushing. I have tried a few different tools tonight. 5 different blanks....couple different techniques and same results. Blow out. I thought it was my technique on the right side but then I changed the bushings to the opposite sides and same result but on the other side. It's frustrating to get that far and so close to finish and then it happens. Going to try another pen kit to make sure and get my confidence back up! Great channel!!
@@BigMikeMora ... sand it to the finish
What speed are you using here?
Between 2,500 and 3,000 RPMs for turning and between 500 and 800 for sanding. Even slower for the sanding would be better but that's as slow as my lathe will go.
Regards,
Bob
Is the finishing the same process as a wooden pen?
+faszfafawe1 No,
For a wood pen, I sand to 600 girt then use Denatured alcohol to clean the wood. Once it all evaporates I apply approximately 5 coats of thin C/A, then several coats of medium C/A. At this point the finishing is similar with one exception, I don't sand as aggressively with the Micro Mesh pads, the coats of C/A are to thin to handle it. Then polish both the same way. I don't use sand paper on acrylics, I go straight to the Micro Mesh. I hope this helps.
Regards,
Bob
Is that a mini lathe from harbor freight?
Yes it is David.
Regards,
Bob
What do you use to video tape your videos?
My iPhone.
Regards,
Bob
I want to get like this blue thing 0:27
Can you tell me in any store i can get this??
Can I get it from the building shops, for example?
Carpentry?
I'm from the Middle East so i dont see her?
I want make gift for my frend she's calligraphy 👍
+Jja Saty Hello,
I purchased it at www.pennstateind.com.
Regards,
Bob
Which grits do I use to sand acrylic with regular sand paper?
Thank you,
This new YT tool is showing me all the comments I missed over the years. Apologies for not responding sooner.
I hope you're still watching and enjoying my videos.
If you haven't checked out the channel for a while, please stop by and see some of the newer videos.
I've made a bunch of the over the years.
I use the same grits as I do for a wood blank. Then I use Micro Mesh to polish all the fine scratches.
Regards,
Bob
Please make a vidio of a 1 piece wood pen, I love all the grain I can see in one piece
Thank you Gary,
There are several one piece pens on my Chanel. Twist pens, click pens, and mechanical pencils.
Regards,
Bob
Where do you get all of your blanks from? Konner
Konner,
I purchased all the blanks in the video from Penn State. I have in the past purchased from Craft Supply.
Regards,
Bob
I noticed the shirt. Is that Mt. Vernon Illinois or mt. Vernon Indiana or another one I haven't heard of? LOL Thanks
Hello Brad,
I currently live in Mt. Vernon, IN. There are two Mt. Vernon's, I live in the southern most, right at the toe of the state where IN, IL, & KY meet.
Regards,
Bob
Thanks for sharing I have trouble turning acrylic with chip out
Thank you, it can be tricky to turn.
Regards,
Bob
Paper towel actually leaves fine scratches itself.
Towels are an abrasive, not I use my finger to polish.
where can i get the one step finish???
I got it at Penn State Industries. I now prefer PlastX from the auto parts store. It’s cheaper and does a better job.
Regards,
Bob.
Well I can’t turn like that so it takes me 2 hours and I mess up alot
We all start out turning slow and making lots of mistakes. With time and practice you will become a great turner. 😃
@@RJBWoodTurner ty I’m trying
I've spent over an hour on my acrylic and it's still not circular fml😩😭
+Basement Wood Werks
Make sure you haven't tightened the tail stock so tight that it's bowing the mandrel.
Make sure your drilling perfectly straight through the blank as well as barrel trimming it square. Otherwise it will be off center.
Put your lathe on the lowers possible speed, start it and bring the tail stock up. That will align the mandrel. Tighten it down then speed the lathe up and lay your tool onto the mandrel. It it vibrates your out of alignment. Adjust until it's smooth before you start turning.
Regards,
Bob
But all that water on you’re lathe bed. 😔
This is an old video, three lathes ago. I’m much more careful now. Plus I keep the ways waxed with paste wax so that helps too.
Regards,
Bob