Replacement 4 pole cable on Aliexpress: - bit.ly/3z64wTb - Heat shrink tubing set on Aliexpress: bit.ly/3FWhI1q Replacement 4 pole cable on Amazon: - US amzn.to/3oznilE - UK amzn.to/3lItCRj - DE amzn.to/3Q4SnXy - Heat shrink tubing set on Amazon: US amzn.to/3N0PtDz UK amzn.to/3N2MF95 DE amzn.to/3IOWWmz
The video denotes 4 wires. Careful : the gold wire has a white (mic) wire inside.. seperate the two.. my mic would not work.. i disasymbled the head set (as per the video's instructions) and discovered a white and gold wire attached to the mic mute swich.. Thank you for the helpful video.
@@krisrobitzsch In my headset, the wires are bound together as one. One may shield the other from external interference. They must be separated. i wrote this comment months ago. So, i dont recall everything. I do recall viewing the headset's internal connections revealed a hidden wire. that's how i discovered the combined set. My plug was damaged and they appeared as a single wire at the plug end. However, inside they are two wires connecting to two places.
Can you help me, guys? I want to re-solder the wire on my Razer Kraken Lite, and there are wires on the board in the following order: microphone, ground, ground, right, ground, left. how do I solder the wire in this case, if the wire I bought (exactly the same as you indicated in the first link) will have only 4 cores? I don't quite understand. Thanks
@@TechscrewDIY I bought the first cable in the link, and as it turns out, it has 3 wires inside, even though it says it supports microphone, and the jack has 3 notches, not 2 🥲
@@nikolay_landau but does it show you the correct cable type on the order ? It's simple, either you made a mistake or the seller did. In both cases the solution is easy -> new cable.
The cable I bought only had (4) wires. None of the other wires had one inside it. And none of the replacement wires you recommended are the same as the one you used. Is this a prank?
@@TechscrewDIY I did but it goes so fast and it’s a bit confusing and your fingers are always blocking so I can’t see. The factory cable has (5) wires. (2) to the mute board and (3) to the sound board.
@@TechscrewDIYi rewatched the whole video and realized what I wasn’t understanding. I followed it exactly. Ears worked but mic did not. Double and triple checked all the wires and solders. Mic doesn’t work.
do razer kraken pro v1 pls i need to fix it but my new cable have 5 wire (I don't know what each color means.) but headset have 6 wire R+ R- L+ L- Mic+ Mic- how to connect my new cable to headset
@@TechscrewDIY I soldered a new 3.5mm jack to my Razer, but I'm not getting separate signals. I have monotonous sound. When you look at these tiny little wires inside the cable, there are always contact points. So, physically, there is no isolation. How can the signals be separated?
@@Boss-sn7ci on these cables are varnish. When you not getting separate signals, then you need check wires with multimeter - video how to use multimeter th-cam.com/video/BMOaVI-yhGg/w-d-xo.html
Replacement 4 pole cable on Aliexpress:
- bit.ly/3z64wTb
- Heat shrink tubing set on Aliexpress:
bit.ly/3FWhI1q
Replacement 4 pole cable on Amazon:
- US amzn.to/3oznilE
- UK amzn.to/3lItCRj
- DE amzn.to/3Q4SnXy
- Heat shrink tubing set on Amazon:
US amzn.to/3N0PtDz
UK amzn.to/3N2MF95
DE amzn.to/3IOWWmz
The video denotes 4 wires. Careful : the gold wire has a white (mic) wire inside.. seperate the two.. my mic would not work.. i disasymbled the head set (as per the video's instructions) and discovered a white and gold wire attached to the mic mute swich.. Thank you for the helpful video.
So did you have to solder the white AND gold both onto the same one?
@@krisrobitzsch In my headset, the wires are bound together as one. One may shield the other from external interference. They must be separated. i wrote this comment months ago. So, i dont recall everything. I do recall viewing the headset's internal connections revealed a hidden wire. that's how i discovered the combined set. My plug was damaged and they appeared as a single wire at the plug end. However, inside they are two wires connecting to two places.
How do you replace the top of the headset? Not the cushion part
simplest way is use universal cushion with zipper, like in this video - th-cam.com/video/MoR7L_njndM/w-d-xo.html
Great video, just what I was looking for. Not a fan of the robot voice though lol.
Thanks and sorry about that voice.
Can you help me, guys? I want to re-solder the wire on my Razer Kraken Lite, and there are wires on the board in the following order: microphone, ground, ground, right, ground, left. how do I solder the wire in this case, if the wire I bought (exactly the same as you indicated in the first link) will have only 4 cores? I don't quite understand. Thanks
it's simply, from aftermarket wire one ground goes to old contacts 3 grounds.
@@TechscrewDIY I bought the first cable in the link, and as it turns out, it has 3 wires inside, even though it says it supports microphone, and the jack has 3 notches, not 2 🥲
@@nikolay_landau but does it show you the correct cable type on the order ? It's simple, either you made a mistake or the seller did. In both cases the solution is easy -> new cable.
The cable I bought only had (4) wires. None of the other wires had one inside it.
And none of the replacement wires you recommended are the same as the one you used. Is this a prank?
did you watch the repair video ? I also use 4 wire cable for repair.
@@TechscrewDIY I did but it goes so fast and it’s a bit confusing and your fingers are always blocking so I can’t see. The factory cable has (5) wires. (2) to the mute board and (3) to the sound board.
@@TechscrewDIYso we don’t need a wire to replace the white one that comes off?
@@krisrobitzsch you need look that full DIY video, You need to check color wiring of new video.
@@TechscrewDIYi rewatched the whole video and realized what I wasn’t understanding. I followed it exactly. Ears worked but mic did not. Double and triple checked all the wires and solders. Mic doesn’t work.
do razer kraken pro v1 pls i need to fix it but my new cable have 5 wire (I don't know what each color means.) but headset have 6 wire R+ R- L+ L- Mic+ Mic- how to connect my new cable to headset
you can simply use 4 wire cable, because 3.5mm jack has only 4 contacts. Left +, Right +, Ground (for mic and speakers) and Mic +
how is it possible, that those wires connect to each other internally and still got the right signals? i dont get it.
I didn't understand the question?
@@TechscrewDIY I soldered a new 3.5mm jack to my Razer, but I'm not getting separate signals. I have monotonous sound. When you look at these tiny little wires inside the cable, there are always contact points. So, physically, there is no isolation. How can the signals be separated?
@@Boss-sn7ci on these cables are varnish. When you not getting separate signals, then you need check wires with multimeter - video how to use multimeter th-cam.com/video/BMOaVI-yhGg/w-d-xo.html
im gonna try to do this but it seems so hard
its easy, just follow steps.
Ok I followed ever step perfectly. Ears worked but microphone never worked. Waste of $20 in parts.
my bunny chewed the cable in half
you're lucky because you can fix them :) was the soup tasty ?
@@TechscrewDIY DUDE
SAME
Same but my puppy
Great video, but don't ever again record audio only on one side on a repair video!
this video sound is stereo. both channels.