Going to look at my first project car today wish me luck Edit: the car a 97 eclipse (not a gsx) it’s a family friends car it’s been sitting sense 2018 and he doesn’t want it anymore I’m getting it later this week I just need to find a trailer
13:30 I said the same thing about my eg hatch with the same amount of tuck you have. Raised the rear half an inch and the the front by 1 inch and changed everything lol
I just scored on a 2000 civic do, has 125k original miles, it’s manual now it’s a sedan but it’s in great condition and I got it for $700 and it runs fine but it’s was $700 because a ball joint broke and broke the axle when he was going to leave a parking lot
$10-12k. 3k for a junkyard motor, 1-2k for a full rebuild/pistons/rods/valvespring retainers/head work/machining(this can get expensive), 2k for harness /ecu and mounts/sensors/peripherals and shit, 1k for exhaust, 3-4k for a turbo set up(turbo,intercooler,injectors,piping,fuel pump,bov,wastegate,boost controller) Aaand thays just for parts. Keep in mind if you'll need tools or to pay a mechanic and tuning sessions cost like $1k an hour..
@@bluzh nah. 3k with trans for a good motor is a good price. Prices have gone up. 3 k is the low ends for the right motor not no came out of a crv bullshit. And an Rsx head is gonna run you 700 bucks by its self
@@bluzh and dynamic tuning doesn't cost 100 and hour. More like 500-1000 to get something tuned. But hondata you can usually get a e tune or find someone local that may or may not know what they are doing to street tune it. But any reputable shop is going to charge close to 1000 to do a tune
@@bluzh but.... even still you get the motor for 800. No trans and a sketchy 100 dollar tune its still over 10k to do it right. Well over 6 k if you do it junky. But I'd still have twice that just incase. I'd say have 15k to start with because you never know. I also recommend a upgraded throttle body and but atleast 2 throttle position sensors. Since k series love to smoke tps sensors
I have a question… did you put your BOV on the exhaust side of your charge pipe or intake side and does it matter? I’m in the middle of my K24 swap turbo build and I’m not sure if it matters or not. Thanks!
You should always put it before your intercooler if you can, that way your not unnecessarily heat soaking your intercooler with air that’s just going to go out the BOV.
The Jeep could easily tow that though?? Surely the civic and the trailer can’t be more than 2.5 tonnes. It probably wouldn’t be a race car towing that much but like you still could ig. Although that number (2495kg, ~5500lbs) is in Australia which I have heard it is less in the americas
ROBBIE I WANTED TO ASK FOR YOUR BLESSING. I LIVE IN SOUTH AFRICA AND I REALLY WANT A COMMITED CREW BANNER BUT ITS WOULD BE WAYYYY TO EXPENSIVE TO SHIP ONE OVER😭😭😭 SO PLEEEEASE CAN I HAVE YOU BLESSINGS TO MAKE MY OWN ONE?🥺🥺🥺
Americans think you NEED a truck to tow a civic. A fucking civic. My dude you can tow that with almost any decently sized car. A fucking golf could tow that
Glad to see our products helping you gain more horsepower for your build! Great video!
너도 빌드를
I love how Nick has really warmed up to being on camera. What a guy, he seems like he's always prepared to put in the effort for you :)
facts
Yeah he ain't one of them tuners that will tune it properly, he won't let it just make power he make sure it actually runs good too
Going to look at my first project car today wish me luck
Edit: the car a 97 eclipse (not a gsx) it’s a family friends car it’s been sitting sense 2018 and he doesn’t want it anymore I’m getting it later this week I just need to find a trailer
Good luck what u getting
Nice good luck
What you looking at getting ?
Good luck bud!! What are you getting?
Same dude!
I think robbies catch-phrase "stay committed" is so relevant... stay committed man!!!!!
My car was down in Mississauga getting tuned for 4 months lmao I know the pain.. Solve one problem and then you get a new one. Love the build!
5:36 that laugh after rev limiter made my day 😂
13:30 I said the same thing about my eg hatch with the same amount of tuck you have. Raised the rear half an inch and the the front by 1 inch and changed everything lol
This is my fav build so far
I just scored on a 2000 civic do, has 125k original miles, it’s manual now it’s a sedan but it’s in great condition and I got it for $700 and it runs fine but it’s was $700 because a ball joint broke and broke the axle when he was going to leave a parking lot
My day gets better when you upload a video
The first couple clips at the start Robbie is the blow off valve when he laughs 🤣
LOL
Congrats on making the 400hp club!
Love the valve. Thinking about going turbo on my ek9 b20vtec and going with yonaka exhaust as well
Dang that Robbie laugh in the intro is giving off blow off valve vibes.
Great job, nice to see it coming together for you. Only one problem in my eyes, Chris really chills have been there with you. Great build bud
My k24 is pushing 450 wheel on a 2.5 inch exhaust and 10psi. It makes almost 800 on e85
800hp with 2.5"?
Daggum Robbie… I see you! That’s awesome results!
Finally this has been a long wait but so worth it
It sucks that it took so long to get it retuned but I’m glad Nick was such a good experience
Robbie so stoked for u my man
Here we gooo. Can’t wait to see what it makes!
I’ve waited so long for this video and m I’m so happy
Could you do a price breakdown once this phase is done with it? I want a project like this but I would like to know what I’m getting into
$10-12k. 3k for a junkyard motor, 1-2k for a full rebuild/pistons/rods/valvespring retainers/head work/machining(this can get expensive), 2k for harness /ecu and mounts/sensors/peripherals and shit, 1k for exhaust, 3-4k for a turbo set up(turbo,intercooler,injectors,piping,fuel pump,bov,wastegate,boost controller)
Aaand thays just for parts. Keep in mind if you'll need tools or to pay a mechanic and tuning sessions cost like $1k an hour..
@@cyruslever586 janky prices bro what you can find the motor for like $800 and dyno sessions are typically $100 an hour not $1k
@@bluzh nah. 3k with trans for a good motor is a good price. Prices have gone up. 3 k is the low ends for the right motor not no came out of a crv bullshit. And an Rsx head is gonna run you 700 bucks by its self
@@bluzh and dynamic tuning doesn't cost 100 and hour. More like 500-1000 to get something tuned. But hondata you can usually get a e tune or find someone local that may or may not know what they are doing to street tune it. But any reputable shop is going to charge close to 1000 to do a tune
@@bluzh but.... even still you get the motor for 800. No trans and a sketchy 100 dollar tune its still over 10k to do it right. Well over 6 k if you do it junky. But I'd still have twice that just incase. I'd say have 15k to start with because you never know. I also recommend a upgraded throttle body and but atleast 2 throttle position sensors. Since k series love to smoke tps sensors
Well this was released early, can’t say I’m complaining 👀
Sweet build. Know anyone in Ontario with a b series lsd transmission that doesn't want too much for it?
Did you use a clutch stop since you are twin disk?
Congrats on 400hp. Nice
Almost 300K mane!!!
Why is no one talking about the red civic in the back, did you go back to red on jasmine?
broo the squrll in the bagground chillin
YESS
Let’s go nick!!
F yeah on my 21st birthday too!
What kind of seats are in the ek????? Nice #’s btw!
YES CIVIC CONTENT
whats that weird howling noise at 4:15 when hes on the throttle, i've never heard that before?
So what’s a more efficient manifold?
yo robbie, off topic question but whats the dimensions on that garage you have, looks like the perfect size
So jealous about that drivetrain :)
Ayeeee the sleeeper finally a sleeper
Your VTEC cut or lock? Cause I can’t hear VTEC crack in
This spring goal is to get my rsx type S out there for nick to tune it.
Man will there be any meets in december? Gonna come to canada for the first time ever and I'd love to meet the crew and see the cars IRL😁😁
LETS GO ROBBIE
Your videos are the best!!!!
About time waiting for this day
Yaa baby
Where did you get the wheels?
Yooo Robbie almost @300k
I live in florida. If Robbie came to florida i would literally die of excitement. Please come to florida and be at a meet.😂
I keep hoping for a Boostedboiz PFI Cleetus Robbie crossover.
Finally!!!
What turbo manifold did yal use ?
If you want to get a towing rig you should get like a third gen Cummins dually that would be wicked
Or a first gen if he can find one, a cummins build would be sweet though!
@@JuiicyPB that was my first idea but the 24 valve is better for towing in my opinion
@@Slednexhead Yeah but a 12v is easier to work on though. Imo easier for non diesel people to learn diesel stuff on
@@JuiicyPB ah I can agree with that
@@JuiicyPB simpler
Time for ethanol ???
My k24 goes to 210 at lights then 175 driving is 210 or 220 over heating ?
I have a question… did you put your BOV on the exhaust side of your charge pipe or intake side and does it matter? I’m in the middle of my K24 swap turbo build and I’m not sure if it matters or not. Thanks!
You should always put it before your intercooler if you can, that way your not unnecessarily heat soaking your intercooler with air that’s just going to go out the BOV.
Tuned on pump gas or e85?
There's gonna be a "EK gets built transmission" video soon lol
My kseries has been holding 450 for a while.. im waiting for it to go out one day.
@@cyruslever586 yeah, OEM Honda transmission don't like torque. At all
@@PrinceofPwnage mine holds 450wheel. Idk what youre talking about.
Happy you are getting your mojo back dude.
Are we getting a video every day on December?
I love the Civics ♥️♥️♥️💯💯💯🔥🔥🔥
Also cleetus is down by my house hell ya brother
K24 w rsx head should make almost 500. Regular k24 should mak like 420-450ish
Daddy nick 🤣🤣🤣
LETS GOOOO
I need them rims for my Honda
Feels good not to have a wrangler vid from Robbie in my subscription feed today
Spal 1226cfm fan with a shroud
IM HYPE
Did he say the sidewinder will be more efficient and now it’s not
You should buy a truck from copart and rebuild it like you did with Jenny
That’s what she said 11:01
i saw the Canadas wonder land lol
Why no s10 for towing?
It is not capable LOL
@@RobbieFerreira rip
Were is the 300z
I love your cat videos
🔥
Leshgoooooo
Never seen the light for being oil pressure it’s for being oil low
But hey maybe Hondas are different
anyone else think nick looks like david arquette from scream? lol
Can anyone tell me what gear they do these dyno pulls in?
4tg
The Jeep could easily tow that though?? Surely the civic and the trailer can’t be more than 2.5 tonnes. It probably wouldn’t be a race car towing that much but like you still could ig. Although that number (2495kg, ~5500lbs) is in Australia which I have heard it is less in the americas
I just know I’ve seen plenty of vids of things flying into the turbo and it scares me seeing you without a filter over that thing ☹️
404 engine not found
ROBBIE I WANTED TO ASK FOR YOUR BLESSING. I LIVE IN SOUTH AFRICA AND I REALLY WANT A COMMITED CREW BANNER BUT ITS WOULD BE WAYYYY TO EXPENSIVE TO SHIP ONE OVER😭😭😭 SO PLEEEEASE CAN I HAVE YOU BLESSINGS TO MAKE MY OWN ONE?🥺🥺🥺
Yuh
This far away~~ the reds still didn't match😂😂😂
Nick (Swardson)
Just get some race ramps
Bag the trailer
Commited
get a cummins for the tow rig. dont get no gasser join the diesel fam
Ayy
I'm back lol
Americans think you NEED a truck to tow a civic. A fucking civic. My dude you can tow that with almost any decently sized car. A fucking golf could tow that
Yo
we know that the ek didn't get the full send build because Jasmine will ;)
Don’t change anything take the exhaust off and run it on the dyno again you will pick up 50hp easy these motors need to breathe
The Valve open = exhaust off
@@RobbieFerreira still has a valve and the length plays a decent part aswell
this car has more dino time on the new parts then the old ones had on the road!!! lol jk looking nice though.
… no way I just heard Robbie say
“It sounds like a bag of dicks.”
Is that what I heard at 11:44 ?? Someone confirm
The problem us you're using glowshift gauges. They're trash
That why you should of kept your truck