🎸 We're Not Gonna TORQUE IT! - What's Wrong With This SBC? - 1987 Blazer PART 4 - UTX
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2024
- Today at Ugly Truck, we ain't gonna take it... anymore! 🎸 This 1987 K5 Blazer is back from the body shop for a quick engine removal so we can finally find out why there is combustion in the cooling system. If you missed it (playlist link below!) this engine was supposed to be a fresh SBC 350 long block, but a quick teardown says otherwise! Just like the rest of this Blazer, none of the cylinder head bolts were tight, allowing the heads to lift up and combustion gases to pump into and pressurize the cooling system. Let this be a lesson for you: TORQUE SPECS ARE IMPORTANT! The good news is that this squarebody is getting a 6.0 LS swap and a 4L60E, so this basket case 350 can finally be put to rest. Hit the SUBSCRIBE button and stick around for the LS swap!
Get the FULL STORY on Neighbor Jeff's '87 Blazer HERE! • Jeff's 1987 Chevy K5 B...
Want to see more LS swap content? Check out this playlist! • 1985 Chevy C10 - LS SW...
Follow us on Facebook! uglytruck
Check us out on Instagram! @uglytruckexperience
Want to send us something? (NEW address!)
7915 E. Division St.
Strafford, MO 65757
LRZOCVAKVVY10DL3
#autorestoration #autorepair #shopdog #oreillyautoparts #springfieldmo #coupleswhowrenchtogether - ยานยนต์และพาหนะ
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
Don't get it twisted, sister! 🎸 Torque specs are important! Grab a nice set of torque wrenches at a great price HERE! amzn.to/3RYWNlj
You guys are so creative with your intro that was perfect😂
I think that white blazer that Emily bought you has some potential if you have deep pockets lol
Keep up the great work, you make it look so easy
That little Pepper is turning out to be a great shop cat, she is so laid-back❤
😁 Thanks Jeff! I knew you'd be jealous of Jerry's new Blazer. I promise we'll let you drive it when we get it running! 🤣🤣
Wow!!!! That's crazy!!!! Yea im just gonna snug it up!!!! Some people need to stay on the couch!!! Great video as always guys!!!!!
Thanks Hugh! Yeah, this guy definitely didn't own a torque wrench! 🤣🤣
@@UglyTruckExperience ROFLMFAO!!!!
@@UglyTruckExperience, I'd say he'd never been within yards of one.
😂😂😂 love the intro.
Sweet Blazer
😁 Thanks Bonkers! We appreciate you watching our stuff!
Sweeeeet lookin k-5……my parents had a light blue ‘91 k-5 back in the 90’s and that thing was a beast….i remember quite fondly it having a corded phone in it!!!!
Sweet!! I remember my grandma had one of those corded phones back in the day, but it was in a Honda Accord which isn't nearly as cool. 🤣🤣 Thanks for tuning in, Trent! --Emily
I believe in you 👫.. it will be Fixed when it Leave's this Shop.😄
Another great Twisted Sister song! 🤘😎 Thanks for tuning in, Bernando!
@@UglyTruckExperience 👻
I used to joke with my boss ! I said tight is tight if done right !
If righty tighty turns into righty loosey, you've gone too far! 😆 Thanks for watching and commenting! --Emily and Jerry
This one reminded me of my 78 4x4 Sierra Classic.. two tone...$8300 new in 1978
It's hard to beat a two tone paint job on these squarebodies! Jeff almost had this one painted solid black back to original, but we're glad he didn't! It's a sharp truck!
I cant keep my eyes off of that cool dodge dart back behind the beetle……i know this is a chevy truck channel but im channeling my inner AL BUNDY right now and that dodge is lookin mighty fine right now!!!
That's our '73 Swinger! 👍 It came home from a body shop, and was parked in a barn for 29 years before we got it running. We have a couple of videos on it if you want to check it out! th-cam.com/video/iHOt-Vyw4rM/w-d-xo.html
Great video, luv your style. Don't waste your time just git 'er done. Wish I was nearby, I'd take that motor, resurface the heads and lap the valves, add a stock Vortec cam and valvetrain I have sitting around, put a good set of composite head gaskets in (they will handle more deck variation than MLS) , put her back together with new hardware and run her on my break in stand up to temp to check her out. Done the same with all sorts of junkyard SBC and LS's and I've had many in worse condition just suck it up and run great for years, no complaints yet. Always someone looking for a cruiser motor with a little extra pop.
We wish you we're close by. Would gladly hand it over to you. It would be nice to see it go somewhere and be used. It wouldn't take much to make it a motor that could get some use. Jerry and Emily
ROFLMFAO!!!! You can fix that blazer Jerry. It's just a little scratch lol. Some bubble cam and locktite and your golden. ROFLMFAO!!!! OH!!!! And I don't know if you noticed but there's a small dent right in the middle of the roof. Just in cased you missed it. ROFLMFAO!!!!
It'll buff out... 🤣🤣 Jerry's working on a plan for the dent in the roof, and he already has the engine turning over! (Spoiler Alert!) It should make for a fun video. 😁 We appreciate you watching, Hugh!
@UglyTruckExperience That's is awesome!!!! I'll be waiting
Question: why aren’t the chrome pieces of gear I sent being worn? It was all because of this Blazer I got motivated to reach out to you guys. Sad face emoji. I still love y’all …
It adds to much horse power.😃😀😎🇺🇸🇺🇸. I like these two too.
I wore the chrome hat just this week while we we're gearing up for this video. Jerry
The neighbor’s Blazer looks awesome! Jerry- I’ll give you a grilled cheese sandwich and a $50 gift card to O’Reilleys for your Blazer… you’ve got my info! Let’s make a deal?
That's probably the best offer we will get on it.
Cant wait to see how you're going to use that 4L60e and transfer case with the passenger side drop. Maybe its easy, I dunno. I just kept my th400 and np208 for my blazer cause it was my first swap
We're super excited about this swap! We've had a ton of questions about 4x4 swaps, and we'll be able to answer a bunch of them. On this truck, the 4L60E bolts up to the NP208, but we'll have to change the output shaft on the 4L60E. How do you like the TH400 with your swap?
Hello, I find y’all’s videos really helpful! So far I’ve got my ls sitting in the truck, wired up I have the fuse box and water reservoir along with the radiator hold down as y’all do in the videos but I am having an issue and was wondering what cable y’all use for drive by cable throttle body. Thank you!!
Hello Johnny. All of our swap's have been drive by wire. I would think that there has to be somebody out there that sells a cable for that. I wish I could be more help. Thanks. Jerry
When you bolt your lift chain to a cylinder head of the LS engine. What size bolt , threads and grade of bolt do you use to hold the weight of a chained Ls engine .
Hey Tony. Those are 10mm x 1.50 pitch grade 8 bolts. Jerry
I admire your work been a tech for 14 years, I have one question for your scanner what programs do you use? If you don't mind
Hello Julio. Our scan tool is from Alldata. We pay them a monthly subscription for all of our shop info and also the scan tool with any updates. We have been pretty happy with it so far. Thank you for watching. We really appreciate it. Jerry and Emily
I noticed this blazer is manual transmission. Are you doing this one currently? If so I was wondering if it would be possible to come and meet you and talk to you about it? I am doing a 1985 chevy crew cab dually swaping in a 6.0 lq9 from a 2005 Cadillac Escalade and my truck has the SM465 4 speed transmission in it also. I have had guys tell me that LS swaps don't work well with manual transmissions So i would like to get your take on that. I live up by clinton missouri but need a reason to go to Grizzly tool and Lamberts Cafe anyhow. Lol
Sorry just seen the part where you are putting a 4l60E in this one.
Hey neighbor! 👋 Yes, this Blazer is going automatic. We haven't done a manual transmission with an LS swap yet, but from what I understand, they can be tricky to tune. We'd recommend finding a good local tuner and talking to them about it. And if you're not busy on September 7th, come say hi and check out the C10 Cruise N' Show just north of Springfield! We'll be there all day! 👍
You got to grease your lift button pushing finger. It sounds horrible. 😃😀😎🇺🇸.
Thanks Dan. I love our Bend Pak equipment, but that hoist has squeaked from the day I put it in. It drives me nuts when I hear it. One of these days when I get a spare moment I am going to tear it apart and grease it again. Thanks for watching. Jerry