Evo Transmission Removal // Detailed How-to Video // Boosted Films
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- EVO Font Bumper removal:
• How to remove a front ...
EVO speed sensor removal:
• How to Install a Speed...
EVO throw out bearing release:
• Mitsubishi Throw Out B...
Facebook: / boostedfilms
Instagram: / boostedfilm
Twitter: / boostedfilms
Snapchat: boostedfilms
Disclaimer:
This video is for entertainment purposes only! Perform anything you see in this video at your own risk.
Due to factors beyond the control of this video creator, I cannot guarantee against improper use or unauthorized modifications of this information. Boosted Films assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Boosted Films, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Boosted Films. - ยานยนต์และพาหนะ
Literally the best and most indepth video of removing a gearbox from these evos. Thank you
Thank you for taking your time from your every day life and your family time for making this video! Cheers!
Awesome. Very thankful to have generous folks like Paul helping the Evo community out.
Awesome video, Paul, very detailed. Thanks for actually videoing all adjustments needed to clear the subframe.
Excellent video. So glad that there is finally producing detailed in depth guides on how to remove these major components which we will all end up doing to our evos.
Anther well done Vid. We appreciate you providing this type of EvO content
What an excellent video, now I just need an old Evo.
Thanks for Your'e time and a super great production!
Thankyou paul for your hard work and detailed diy
Very detailed, and it helped me a lot the first time I removed my Evos gearbox!
Thx m8 :)
Thank you for posting these videos !.
Great explanation on the throw out bearing. was very helpful
Thank you for the video. pulled my transmission yesterday :)
Thank you! Best ever instructional Evo videos ever hands down!
Glad it was helpful!
Goodjob paul!
Very informative video!!
Cheers mate ✌✌
Thanks man, this helped me out a lot!
Amazing video! thank you so much!
💪 for doing this in the winter w/o heat
After unbolting the t-case, you can access a short bolt that holds the transmission to the block. I don’t know if perhaps I missed this in the video, but I don’t think you mentioned it.
Thank you so much for this video, made removing my transmission possible
it was not mentioned, hopefully this comment helps someone. i was stuck for a while before I noticed that bolt.
Thank you
I wish you made a video on how to put
It back together like thoroughly
I have a ralliart and this helps more than what I found for mine
Excellent info. enthusiastic subscriber here!
I had to do this back in September on jackstands as well.. Hardest most PITA parts were removing those damn CV shafts, the intermediate shafts, and actually getting the trans itself out. Next time around the CV and intermediate shafts will be easy.. Trans will still be a pain.
oh and I am astonished you were able to get the trans out without jacking up your Evo more. It looks so low to the ground!
Agree on all fronts.
I think my trans came out easier with the car as low as it is because i removed the front bumper and the entire driverside hub & lower control arm.
Great vid👍
Awesome, thank you 👍
great vid! thank you!
For a ACD transfer case, do you have to remove the pressure pipe from the ACD pump?
Привет. Спасибо за такой подробный видеообзор. Это огромная работа всё снять и так подробно объяснить. Спасибо тебе. Привет из России)
Thanks a lot.... very similar to the Evo 5 I'm currently doing
Is there anything i should know im going to be doing a 6 and was using this as a guide line
To him get to the hidden 14mm bolt between the transfer case and transmission you need to fully unbolt the 6 bolts on the transfer case and push it out of the way to accessible the 14mm bolt from the block to the transmission.
Thank you for making this, it doesn't seem as intimidating as I thought. A couple times in the vid I found myself thinking "If I'm taking that off, might as well replace this other thing while I'm in here" DId the numbers in my head, and it got expensive real fast lol
I actually did that... yes it added up... Whiteline steering precision cit, roll center correction kit, front sway bar... it didn't help that I installed a built 5 speed along with rebuilding my tcase and installing cams all at the same time. Doh.
John Lamb yea I was thinking about the whiteline roll center kit too as well as bushings. And if I’m already taking out the axles I was thinking of upgrading them too lol
@@VicVoss yikes, upgraded axles are $$$. RCC is cake to install if you have a hydraulic press.
Sweet brother....👍
I used your previous video for the transfercase
Where do you place your jackstands under the car? It looks like you're on the lower control arm bolt?
Do u have a video .. how to refill and bleed fluids??
1000 like! If I don't remove transfer I still must drain it ? Oil is new
Thanks for the video 🤙
Bout to take out the gearbox in my evo 6.5
Mine doesn’t go in gear when the motor is running. Clutch slave moves in and out, but won’t go in gear. So thinking the bearing is cooked or the fork is bent
One more thing, the flywheel fell and hit the ground, do i need to get a new one?
Great video, I’m the original owner of a 2003 EVO 8 and I’ve had two clutches replaced by a local shop. Nice to see how it’s done.
How much did it cost
Good stuff man as always. Its always a PITA doing it on jack stands. I had such a hard time with my buddy gettiing the 6 speed back up in there. When we did the last one. I've done about 5 evo clutch jobs now its never fun but key steps you pointed out have to get done or its impossible for anyone thats never done it before.
The Harbor Frieght slide hammer kit can be modified also to get the intermediate shaft for all you guys actually reading comments.
Thanks. I almost bought a harbor freight slide hammer, but it seemed like too much money for something I would probably only use once or twice. How does it need to be modified? Same concept as my dent puller?
Yeah it looks like the m8 bolt is going to fit perfect with one the attachments but of course it didn't. I had to use a drill bit and open it up and it grabs right on top of the bolt head. I figured for 20 dollars or what ever I paid I'll have it in the tool box for when someone around me might need some help doing a Evo clutch job. I'm doing a motor build in the next year or so, everything will be coming out again so it'll get used again.
@@richardroberti1192 Thanks for the info. Now that i look on the Harbor Freight website, i see they have a $25 Slide hammer/puller. I would have grab that one had i found it. The only one i saw in store was the $70 slide hammer kit.
bolt a chain loop on the shaft and pry the chain the shaft will pop out !
You the 🐐
Doesn’t popping the lower ball joint off break the seal?
Has anyone had issues with a seized TOB? My waveclip is clamped tight so I unbolted the pressure plate from under neath but when trying to break trans from engine it won’t budge
Why didn’t you mention anything about a hidden bolt between the transmission and transfer case ?
Respect for the information can you do a slower video how to remove the throw bearing.
also, dont know if you cover this in other video, but there is a bolt on the back of the motor at the same level of the bolt that is above the starter
dude youre a life saver. i was going mad trying to figure out why i cant separate them and i only got my tcase 3/4 of the way out so i never saw the bolt.
Hi Paul, thanks fo rthe video. I have a evo 4 that needs a release bearing and am thinking of doing it myself. I know that while im in there I might as well replace the clutch so I am asking if indeed I can just replace the bearing and reinstall the clutch flywheel etc. Or do I need to resurface/machine the fly wheel etc??
I would get the flywheel re-surfaced and install a new TOB.
Hii paul,
quick question is there any pilot bearing in the flywheel or crankcase for the tranny input shaft? Tq paul
For the rear motor mount, why are all three bolts needing to be removed? Why not just the long bolt through the rubber piece? What am I missing, thanks.
Probably too tight to get the trans out while leaving that side of the mount on. But you can certainly try it that way and see if you can still get the trans out.
@ 20:06 is that different from a 9? It seems to be difficult getting a socket on the bottom bolt? I even removed the rear mount bushing .
How did you wind up dealing with this issue? I too cant seem to get at the bottom bolt.
How to put it back in after i install the tran? I try to pull the shift fork but the bearing wont reclip it self
Then something else is wrong.
@boosted films where is the rectangular clutch inspection cover located, i cant seem to find it on mine...... cant find a picture on the forums either.
I'm not sure what part you are referring to. The rectangular rubber piece is part # MD746526
👍
why am i watching this i don't even own an evo
😅
Paul, i was able to remove transmission, but it was very difficult, the transfer case gets on the way.
I removed 3 motor mount then i had to lower the engine a as i lower the transmission but the transfer case finds its way towards the transmission and the transmission hangs on transfer case, the gears in the transfer case got a bit scratch :( ...... whats your technic?
Julio Lucero ratchet strap the t-case away from the trans side of the car.
@@BoostedFilms any specific points where i should strap the TC? Thank you
helpppp!!!!!!!! how did you remove the rear motor mount??? whats the angle that you use for the swivel socket?
ive been trying for 3 hours and the bolt wont move...... i used the suggested tool @ 20:12 and nothing it wont move :(
Any luck? I’m stuck too
Hey, Paul.. Hoping to get a reply for what seems to me as a "dumb" question. After pulling the intermediate shaft at 10:38, Is that xcase (diaqueen) or trans fluid that comes out?
No fluid really comes out after pulling the intermediate shaft. But its probably going to have some t-case gear oil on it.
@@BoostedFilms Thanks so much!
If anyone is using this video as reference where the hidden transfer case bolt it’s blocked by an acd line. This is for an acd t-case.
You should say what size bolts
Tans to engine. (2) M10x60, (2) M10x50, M10x40, M6x10
I can’t get that damn top rear motor mount bolt off. What the fuh.
Thanks for this awesome video, I’m about to attempt removing my tranny this weekend
Can you make a video getting the transmission back in??
ant_evo working on it
@@BoostedFilms omg.. I wanna kill myself.. it was easy getting it out.. I fighting to get it back in..Thanks
ant_evo working by yourself with no trans jack or engine hoist?
@@BoostedFilms 2 Jack's 2 jack stands 1 engine hoist.. 1 guy My 1st time doing an Evo clutch
But have done fwd clutch install before.. this damm trans is very heavy to man handle ..
help help...... at time 16:02 you are able to access the 6th bolt on TC to Tran, on my evo 9 theres a banjo bolt connected to a line... what is that?
please help, how do i remove that?
Julio Lucero it’s for your acd (active center differential). The line runs from your acd pump near the rear of the car up to the transfer case. You need to remove that line and then bleed your system when you re-install.
@@BoostedFilms Please excuse my ignorance. Its my First EVO ever, how would i bleed the system? Do you by any chance made a tutorial on that.
Thank you
You should do a video on how to reinstall it, I’m trying to reinstall my evo 9 transmission and it’s just not happening
I will be doing that as well. If you are trying to re-install by yourself... without a trans jack or shop crane, its a real PITA.
Boosted Films I just got mine back in , it took me and 2 other people and 2 and a half hours , with a trans jack , if you get yours back in by yourself I’d love to see how the hell you did it lol
6:20 shaft removal 31 mm?or 32 mm?
32
Очень советую купить длинный гаечный ключ 17 19 мм