Level up your printers with metal!
ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2024
- If you like my work, please consider buying me a nozzle // ko-fi.com/kanrog
=================================================
Big thanks to PCBway.com for helping me get this into reality!
check them out at pcbway.com
=================================================
Here is a link to the parts on printables:
www.printables.com/model/8930...
=================================================
Best place to get your filament! (in Norway) // www.3dp.no/
All my socials // linktr.ee/kanrogcreations - วิทยาศาสตร์และเทคโนโลยี
Make it even cooler and fancy with progressive metal.
Can we get some power metal?
Dang those looks so clean. That purple is sooo 😍
Yay for CNC belt cradle!
It helps a lot with the tension I'm running 😎
@@kanrogcreations What tension are you running with this new setup?
Haven't measured, but it's uncomfortably tight 🤣
@@kanrogcreations Thats what she said
ze idler towers could be made from sheet metal...
That is a possibility, yes
46 bucks? Each? How much did it really cost?
The total for me was around 150.
hey i was wondering what motors and voltage you were running through those motors?
2004S @1.6A
@@kanrogcreations thanks. I'm buiilding a corexy vzbot and I such your very impressive acceleration. I was also wondering, in your opinion do ldo motors matter as in high quality matter because I've been struggling to get similar performance out of my steppers. They can only go about 11k acc and 400mm/s on a awd gantry
Motors make a big difference, yes!