Would love to have the 54 or anything you build love your style ratrods and patina paint make so many vehicles look so goooood For the rat mud truck you should use old street signs for the bed floor. Also pull a couple plugs see if fuel is in the cylinder if it is check the cam position sensor or possibly map sensor good luck with the build love the channel love the content keep up the killer work
Casey I gotta tell you a true Story. I bought 12 of that exact same spray paint the (Gloss Black Rust-Oleum turbo) bought a case of Rust-Oleum sandable grey primer and last early spring set up a temporary paint booth I'm our 2-1/2 car garage that's heated and sanded our one owner original 1972 Rally Nova 350 4 speed car down to bare metal (the original factory metal flake green was in really bad shape) then took and filled any little dings or bumps we couldn't pop out, got it all as smooth and straight as we could, primed the entire car just like factory (door jambs fender wells etc.) wet sanded between coats, then let it set over night in the shop with our little box fans for exhaust out the window then the next day painted the entire car with 4 good smooth coats and sanded between all but the last coat then sprayed the entire car with 2 heavy coats of clear gloss and sanded and buffed them to a absolute mirror shine. it looked so good we went to a big car show this summer (it's a Pro Street car now) complete with 434 small block and Liberty 5 speed and we parked the car and went walking around to see the other cars that were way out of our class and league....when we returned there were 2 officials from the car show organizers that had just finished giving us the peoples choice award ! and it was kinda embarrassing because we hadn't even entered in the show.....but that didn't matter to them since any car at the show was eligible for this award and sheesh we got a free steak dinner for 2, a hundred bucks spending cash and a huge ass trophy....and we had no intention of putting it in the show cause while we were very proud of it ...we had no idea other people said it was by far the next to best paint job in the whole car show ! lol.....we didn't have the stones to tell them it was a lot of work and rattle can paint ! lololol. true story.
I'd find out how much pressure is at the rail. It could be letting enough gas through the filter to seem like it's working but not enough to keep the right pressure up for the injectors. A relay could be bad. Swapping them around is an easy way to check. Used to be all you needed was spark and fuel. Kinda miss those days.
Jdd e K k dsj d n jj rqj. Q j. Jlk j jdj edhk.jdqjjjjmj j dj j jmjj d .jd dd j s njd J Lgnsj. MD rrd Rrrrr Rrr. Klkhm l jj j hn m m ljmj dmekjeej r Ghllkdj dj😮 Jjjjhmhjjr I'm m q djrmmhl m d*j.
Hey if you ever need to test a fuel injector you can use a 9v battery to see if its opening, you can also use the battery to keep it open and run some cleaner through it
Wow, I haven't heard that name in ages. I took autobody in vocational school from 78-80. We used to call our teacher Johnny Scheib. He did not think it was funny at all.
Hi I'm new to your video! I love to see guys who will paint their hot rods!! Its what I and my friends did back in the sixties. We spray bombed many cars, we did lots of prep, but we couldn't afford to have a pro paint our rides. We put plenty of paint on and let it dry for a week or so, then we polished them out , I took a summer paint n body class between 10th and 11th grade, then on I did all the painting. Yes I had some runs here n there but I wet sanded up to 1200 grit, and our rides looked fine. I did cars for my brother and my friends but I had no desire to paint jobs for people, I wasn't that confident and didn't like painting that much.
i found myself wondering if this video pushed your dad over the edge.. for some reason i see him walking in saying you are no longer my son then driving off to a private place to cry and try to figure out where he went wrong raising you.. i mean this in a funny way and know he is very proud of you but because of his reaction to your bondo work
I WAS LAUGHING SO HARD, AFTER YOU HAD PUT THE SEATS IN AND WERE TESTING THEM OUT, YOU LOOKED LIKE A CHRIS FARLEY SKIT, SMALL GUY IN A BIG TRUCK, SO FUNNY!!! THE ROOF HAS SO MUCH HEAD CLEARANCE IT MADE YOU LOOK LIKE MINI ME FROM SPY WHO SHAGGED ME. HILARIOUS 😆😆😆
Wow that’s good to know. Last year I rattle canned an 87 f250 with regular rustoleum gloss black cans. Took about 8 cans without doing inside the bed that was previously done with a cheap spray bed liner. Currently have a 91 f150 that needs paint and I’ll definitely be doing it with these cans
Dude that is a serious spray pattern for some shake shake, I agree with some of the other comments about checking fuel pressure at the rail and make sure the injectors are getting power to fire.
I just found this channel and watched a few vids. Casey is hilarious. I enjoy the process and the realism he creates. To the editor: “Richard”? Idk that’s what Casey said, dude, your skills are awesome. Thank you for what you do to make it entertaining and enjoyable. Both of you keep up the good work.
In the event that it is the one with the plastic clips all you gotta do is take A sharpie and cut the top in half and then slit it down the center, slide it over the line push it up in the slot and pull out.
Just joined! That is a Ford my Dad owned. Not sure the year, but I remember him telling me it had the spare that mounted on the outside of the bed. It dawned on me after about 5 minutes, but yeah. It put a smile on my face. My pops passed on Friday March 13th 2020
Good for you man. At least you're not one of those people that calls a rusty mess "Patina". Patina is the definition for "Can't afford to paint my truck"
How about sectioning the cab and hood to bring it down and get the dash to the right hight rather than chopping the top, would be more unique and you have the skills to make it work.
Nice that you moved the red 57 Chevy out of the garage before you started spraying that black paint. Say hello to black overspray on that red paint job. What a hack!
Check out some fuel injector videos, you can see how the spray pattern works, pop ya breather off n start on starter fluid or bottle then watch your spray pattern
One time I ran into a fuel injector problem and the answer was for this particular one that the fusible link to the positive side of the battery was damaged check your hookups
You're better off using a fine nap roller and some acrylic enamel. You get much better coverage and there is less waste. Then you can wet sand the orange peel out when it dries. I did this to my first car (a 1942 Packard) when I was 17 years old... Just my quarter adjusted for inflation...
👍Good stuff! Funny story, had a very old uncle that flipped cars in the 60’s & 70’s. He’d paint them in a weird way but my dad said they actually looked pretty good. He’d mix his paint w/ “white gas”. Roller & brush. Guessing the gas would evaporate. I’m no painter. Pops said no brush marks that he could ever see but a run here and there. HA! This was in the country way south Alabama. Said he moved 40-50 cars & trucks a year like that. Guess if there’s “will” there’s a way! ✌️👍🇺🇸
Hey man just found your video. I like the idea of your painting I had the same thing with my old dodge, it was painted light gray. And had bare areas, old paint colors . A friend of mine told me to use clear coat, I did and man it changed from the light gray to black and with patina showing! I'll try to send a picture! Thanks.
I can't believe your doing that with the bel air sitting over there 😱 wont particles land on pretty much anything around? I spray painted somthin in my parents garage and there were particles. Good job it looks great!! This helped me figure out how many cans I needed for my s10
I know it wasn't a high priority, but there are things you could do during the spraying process that would make this much better. It's obvious your not a painter, but that's alright.
It's a Ford pickup on a ____ 4 wheel drive chassis? Fill in the blank Some cars come with a Schroeder valve to relieve the pressure near the fuel pressure regulator.
Cool on the paint job. on the engine. i would pull the tube off the throttle body and open it and spray a little ether in it. if it fires off then check fuel pressure at the injector rail. if you got proper pressure then look at the injector and see if they have power and if the ground it breaking like it's suppose to pulse the injector.
Definitely check the fuel pressure at the fuel rail. Just because it's at the filter doesn't necessarily mean there's enough to start it. Had similar issue on one of my projects. Then check for spark.
@@stance_is_everything I bought 2 cans from amazon in june. I am just north of toronto maybe that's why? I havnt looked recently. Even the regular cans are like $15 now at canadian tire. Crazy!
interesting spray, I've never seen that turbo version, after looking into it, they need to add more colors, only black, white, clear available. I say raise the seat 2" so you don't look like a 12 yr. old sitting in it.
Got here late , have u tried to spray something into the intake to see if it will kick off for a second....... if it don't it might be ignition, no spark at plugs ..... if it does kick off then it's fuel related .
Does it crank? If not, check the starter, and check the associated parts. If it does crank, check for fuel getting onto the intake area. If it's leaking, injectors probably need new seals. Also check the oil. If they mix,oil and fuel make the motor go bang.lol
I remember some mechanic that I know he rebuild the engine twice because it wasn't starting only to find out the reason why it wasn't starting was because it had old gas in the gas tank. He drained it and put new gas in it and it started.
I would change the fuel filter. Just so down the road no problems hopefully. And might be a cure. Been on it a long time wouldn't hurt Changing it. I would just saying.
Suck, bang blow. You have Fuel, but is it in the Fuel rails? Also certain engines require a certain fuel pressure. If all that is correct, do you have spark? Even if you had a bad fuel injector you still should be able to start it. But can't be sure without watching a video of you trying to start the truck. Also check out the ecm, and fuses for any blown fuses for engine and ecm run/control.
WE ONLY GOT 90 DAYS LEFT TO HIT 100k AND GIVE THE 1954 CHEVY AWAY FOR FREE! HIT THAT SUB BUTTON!
Would love to have the 54 or anything you build love your style ratrods and patina paint make so many vehicles look so goooood
For the rat mud truck you should use old street signs for the bed floor. Also pull a couple plugs see if fuel is in the cylinder if it is check the cam position sensor or possibly map sensor good luck with the build love the channel love the content keep up the killer work
I'm trying Casey, I've got my wife and buddies subscribed too. Good luck on the 100k.
@@mikebobbitt5278 love hearing that, and thank you!
🥇🇺🇲🔥🤟🏽
Next is Red trim along the edges of some parts....heat it up like a habinaro pepper...(yes im sure its wong)
Casey I gotta tell you a true Story.
I bought 12 of that exact same spray paint the (Gloss Black Rust-Oleum turbo) bought a case of Rust-Oleum sandable grey primer and last early spring set up a temporary paint booth I'm our 2-1/2 car garage that's heated and sanded our one owner original 1972 Rally Nova 350 4 speed car down to bare metal (the original factory metal flake green was in really bad shape) then took and filled any little dings or bumps we couldn't pop out, got it all as smooth and straight as we could, primed the entire car just like factory (door jambs fender wells etc.) wet sanded between coats, then let it set over night in the shop with our little box fans for exhaust out the window then the next day painted the entire car with 4 good smooth coats and sanded between all but the last coat then sprayed the entire car with 2 heavy coats of clear gloss and sanded and buffed them to a absolute mirror shine. it looked so good we went to a big car show this summer (it's a Pro Street car now) complete with 434 small block and Liberty 5 speed and we parked the car and went walking around to see the other cars that were way out of our class and league....when we returned there were 2 officials from the car show organizers that had just finished giving us the peoples choice award ! and it was kinda embarrassing because we hadn't even entered in the show.....but that didn't matter to them since any car at the show was eligible for this award and sheesh we got a free steak dinner for 2, a hundred bucks spending cash and a huge ass trophy....and we had no intention of putting it in the show cause while we were very proud of it ...we had no idea other people said it was by far the next to best paint job in the whole car show !
lol.....we didn't have the stones to tell them it was a lot of work and rattle can paint !
lololol. true story.
Should've sanded the rust spots down and got some primer before the first spray because the rust will grow underneath all of it
I'd find out how much pressure is at the rail. It could be letting enough gas through the filter to seem like it's working but not enough to keep the right pressure up for the injectors. A relay could be bad. Swapping them around is an easy way to check. Used to be all you needed was spark and fuel. Kinda miss those days.
Jdd e
K k dsj d n jj rqj. Q j. Jlk j jdj edhk.jdqjjjjmj j dj j jmjj d
.jd dd j s njd
J
Lgnsj. MD rrd
Rrrrr
Rrr. Klkhm l jj j hn m m ljmj dmekjeej r
Ghllkdj dj😮
Jjjjhmhjjr
I'm m q djrmmhl m d*j.
Hey if you ever need to test a fuel injector you can use a 9v battery to see if its opening, you can also use the battery to keep it open and run some cleaner through it
Get a fuel pressure tester, there will be a fitting on the fuel rail. Test it first, then you will know for sure the fuel pump is good.
Fantastic! Earl Scheib himself could not have done a better job!
🤣🤣
Wow, I haven't heard that name in ages. I took autobody in vocational school from 78-80. We used to call our teacher Johnny Scheib. He did not think it was funny at all.
I don't think EARL did any masking either.
Hi I'm new to your video! I love to see guys who will paint their hot rods!! Its what I and my friends did back in the sixties. We spray bombed many cars, we did lots of prep, but we couldn't afford to have a pro paint our rides. We put plenty of paint on and let it dry for a week or so, then we polished them out , I took a summer paint n body class between 10th and 11th grade, then on I did all the painting. Yes I had some runs here n there but I wet sanded up to 1200 grit, and our rides looked fine. I did cars for my brother and my friends but I had no desire to paint jobs for people, I wasn't that confident and didn't like painting that much.
i found myself wondering if this video pushed your dad over the edge.. for some reason i see him walking in saying you are no longer my son then driving off to a private place to cry and try to figure out where he went wrong raising you.. i mean this in a funny way and know he is very proud of you but because of his reaction to your bondo work
Lol you are not wrong, it took him along time to like patina 😅
I WAS LAUGHING SO HARD, AFTER YOU HAD PUT THE SEATS IN AND WERE TESTING THEM OUT, YOU LOOKED LIKE A CHRIS FARLEY SKIT, SMALL GUY IN A BIG TRUCK, SO FUNNY!!! THE ROOF HAS SO MUCH HEAD CLEARANCE IT MADE YOU LOOK LIKE MINI ME FROM SPY WHO SHAGGED ME. HILARIOUS 😆😆😆
Yeah I agree he has do do something about that it looks too funny and anyone who is not over 6 ft is going to have a hard time driving it.
Casey the King of Budget Builds
I try!
I hate this lowering to the ground garbage and this wagon wheel and thin tire crap going on these days, ruins the looks of ANYTHING out there.
Wow that’s good to know. Last year I rattle canned an 87 f250 with regular rustoleum gloss black cans. Took about 8 cans without doing inside the bed that was previously done with a cheap spray bed liner. Currently have a 91 f150 that needs paint and I’ll definitely be doing it with these cans
let us know how it turned Out 🙌
@@vleldaddio210 definitely will. Truck is quite the project right now. Hopefully I’ll be able to get back to it after my deployment.
Make sure to clear coat it
I would have gone with flat black. It hides the imperfections much better than gloss.
He said he is sanding it down like the Porsche
I’m doing flat black with my 2000 f150
As a graffiti enthusiast and auto enthusiast... these turbo cans are revolutionary 🤙
That can of paint is insane! Never see it before.
7min in i forgot i didnt hit like, but feel-good story of the seats deserved a like
check the fuel pressure regulator
Man it lays down paint pretty good. I'm impressed by turbo cans.
I'm building a f600 on a 87 Chevy 4x4 long bed frame. I love this build
Dude that is a serious spray pattern for some shake shake, I agree with some of the other comments about checking fuel pressure at the rail and make sure the injectors are getting power to fire.
I just found this channel and watched a few vids. Casey is hilarious. I enjoy the process and the realism he creates. To the editor: “Richard”? Idk that’s what Casey said, dude, your skills are awesome. Thank you for what you do to make it entertaining and enjoyable. Both of you keep up the good work.
I am 75 years old👍👍👍👍👍I have been auto repair for 50 ok,I you have done everything 😱😱😱😱😱😱CHECK FILTER IN THE GAS TANK👍✌️👊
Check the distributor cap if it's sat outside. The 4.3's are bad about corrosion in the caps.
Ahh, the Saturday night special has returned!!!
I used the turbo can before and didn’t even know it. I was crazy surprised and the coverage is unreal! Nice video!
CHOP IT! CHOP IT! CHOP IT! 😆😆😆
... so just youtubing around, saw this video pop- made my day!
Chop it it's definitely different and would look good I know you can do it
You look tiny in there! Chop it!!
Finely did it, thanks... Got me thinking about the hoopty ville, five or six of those in satin white.hmmmm🤔
Do it!
Probably cpi spider assembly!!
HEHE, I'm never tempted to spray bomb stuff usually... but these videos inspire me to paint it all black!
Those turbo cans giving me some ideas.
In the event that it is the one with the plastic clips all you gotta do is take A sharpie and cut the top in half and then slit it down the center, slide it over the line push it up in the slot and pull out.
Just joined!
That is a Ford my Dad owned. Not sure the year, but I remember him telling me it had the spare that mounted on the outside of the bed. It dawned on me after about 5 minutes, but yeah. It put a smile on my face. My pops passed on Friday March 13th 2020
Good for you man. At least you're not one of those people that calls a rusty mess "Patina". Patina is the definition for "Can't afford to paint my truck"
Sickkk looks awesome
Those two slammed whips are sick
You look like a little guy with that roof 2 feet above your head. Can we get an accent color on this one. Pin stripe, trim, or interior coloring
U sound like us TRYING to build a quick flip motorcycle. "Let's just paint it and sale it" turned into a lowering and hard tail build. Lol
GREAT VIDEO CASY!!!! THE TURBO CANS ARE GREAT FOR ANY BUDGET. I LOVE IT!!!!
Check your fuel pressure regulator valve it check it see if there's any fuel going through it good luck with it brother have a very blessed day 🙏
Thanks for moving the Sunday video to Friday. This is great!!
A lifted chopped truck that'll be cool
Hell yes. I loved the car show/ open house you had last time. but that was like 9 years ago lol
It was a blast. The little “swap meet” in the alley was dope. I made like 700 bucks selling junk in the shop 🤣
How about sectioning the cab and hood to bring it down and get the dash to the right hight rather than chopping the top, would be more unique and you have the skills to make it work.
Damn! Who needs Maaco when you have turbo cans! You could do a proper paintjob with some primer and gloss
Nice that you moved the red 57 Chevy out of the garage before you started spraying that black paint. Say hello to black overspray on that red paint job. What a hack!
Damn man how far do you spray your spray paint?!?
Try the fuel inertia switch. Love your show, don’t stop!
Chevrolet doesn't use a inertia switch
also he hears the pump, That was my first thought too.... I dont know what the base truck is,
make a hidden board to hide a gun like cobra silvester's truck stalalo greetings 🇲🇽👏👋
Check out some fuel injector videos, you can see how the spray pattern works, pop ya breather off n start on starter fluid or bottle then watch your spray pattern
Lol I don't know why I just remembered pink panther spraying his blue convertible VW with a pink spray 😂 hilarious
One time I ran into a fuel injector problem and the answer was for this particular one that the fusible link to the positive side of the battery was damaged check your hookups
You're better off using a fine nap roller and some acrylic enamel. You get much better coverage and there is less waste. Then you can wet sand the orange peel out when it dries. I did this to my first car (a 1942 Packard) when I was 17 years old...
Just my quarter adjusted for inflation...
such a bummer i loved the before look
man they just need to sponsor you at this point with these turbo paints
That is one hell of a coverage area that is Great 👍👏🙌
👍Good stuff! Funny story, had a very old uncle that flipped cars in the 60’s & 70’s. He’d paint them in a weird way but my dad said they actually looked pretty good. He’d mix his paint w/ “white gas”. Roller & brush. Guessing the gas would evaporate. I’m no painter. Pops said no brush marks that he could ever see but a run here and there. HA! This was in the country way south Alabama. Said he moved 40-50 cars & trucks a year like that. Guess if there’s “will” there’s a way! ✌️👍🇺🇸
I love ha ha ha you, Tecca, auto body class bro 😂❤ never paint direct over dings dents and rust 😮
Hey man just found your video.
I like the idea of your painting I had the same thing with my old dodge, it was painted light gray. And had bare areas, old paint colors .
A friend of mine told me to use clear coat, I did and man it changed from the light gray to black and with patina showing! I'll try to send a picture! Thanks.
I can't believe your doing that with the bel air sitting over there 😱 wont particles land on pretty much anything around? I spray painted somthin in my parents garage and there were particles. Good job it looks great!! This helped me figure out how many cans I needed for my s10
GREAT VIDEO CASEY!!!! THANKS FOR SHARING AND I LEARNED SO MUCH. I LOVE YOUR 4x4 RAT ROD TRUCK!!!
There is a Schrader valve on the fuel rail turn on the key press the core and the gas should spray.
I know it wasn't a high priority, but there are things you could do during the spraying process that would make this much better. It's obvious your not a painter, but that's alright.
If it's a vortex and it won't start always check to see if you have oil pressure...if the sending unit is bad it won't allow the truck to start
possibly a ignition module
Looks awesome black had a55,56 f100 loved the trucks
Rustoleam sponsor this man! Turbo cans for the W!
It's a Ford pickup on a ____ 4 wheel drive chassis?
Fill in the blank
Some cars come with a Schroeder valve to relieve the pressure near the fuel pressure regulator.
Cool on the paint job. on the engine. i would pull the tube off the throttle body and open it and spray a little ether in it. if it fires off then check fuel pressure at the injector rail. if you got proper pressure then look at the injector and see if they have power and if the ground it breaking like it's suppose to pulse the injector.
I wish I had that blue shot truck❤🙏🏿👍🏾
I painted a 1978ford F350 3yd dump and after primer 2 cans of primer 2can per panel and it look professional
Those turbo cans put out a pretty decent fan too.
Awesome!!!!
Awesome video buddy 👊
Earl Scheib would be proud! LOL!!!!
Man I love all your videos. I'm learning a lot just watching and your editor is freaking hilarious too
Definitely check the fuel pressure at the fuel rail. Just because it's at the filter doesn't necessarily mean there's enough to start it. Had similar issue on one of my projects. Then check for spark.
those flippin turbo cans are like $35 here in canada!
Holy shit!
Where are you getting them in Canada? I can't even find them and via amazon it was around $60 to my door
@@stance_is_everything I bought 2 cans from amazon in june. I am just north of toronto maybe that's why? I havnt looked recently. Even the regular cans are like $15 now at canadian tire. Crazy!
@@marcm3017 yeah I'm east of Toronto. Crazy we can't get them easy. Paint supplies are so much now.
We could all agree it looks like the first model car
Missouri here can’t wait for that 100k giveaway
interesting spray, I've never seen that turbo version, after looking into it, they need to add more colors, only black, white, clear available. I say raise the seat 2" so you don't look like a 12 yr. old sitting in it.
they do have a clear white black and bed liner, and rusty brown primer i plan on getting a couple bed liner ones for my hood the bed and my roof
Coolest intro I've ever seen. Had to subscribe.
I need that 54 on the giveaway. I could only imagine how many kids would be smiling 😁
Got here late , have u tried to spray something into the intake to see if it will kick off for a second....... if it don't it might be ignition, no spark at plugs ..... if it does kick off then it's fuel related .
Regulator, injectors, check wiring in case any mice got in there and chewed on anything around the injectors. They love wire insulation
I'll love to drive it with my son in the Sunny Florida State:)
Chop it! Chop it! Chop it!
Does it crank? If not, check the starter, and check the associated parts. If it does crank, check for fuel getting onto the intake area. If it's leaking, injectors probably need new seals. Also check the oil. If they mix,oil and fuel make the motor go bang.lol
I remember some mechanic that I know he rebuild the engine twice because it wasn't starting only to find out the reason why it wasn't starting was because it had old gas in the gas tank. He drained it and put new gas in it and it started.
One of my favorites
The NPC with googly eyes is nice
I would change the fuel filter. Just so down the road no problems hopefully. And might be a cure. Been on it a long time wouldn't hurt Changing it. I would just saying.
Could it be the fuel pressure regulater
Can't stop thinking about all the overspray on the other vehicles around you.
Dude that is wild bro
Maybe you can drive the Mustang or trailer it to Fabulous Ford Forever Car show in CA in April 2023. And bring some merch to sell
I love spray Spray can Paint I've never seen one that does that though that's crazy
Suck, bang blow. You have Fuel, but is it in the Fuel rails? Also certain engines require a certain fuel pressure. If all that is correct, do you have spark? Even if you had a bad fuel injector you still should be able to start it. But can't be sure without watching a video of you trying to start the truck. Also check out the ecm, and fuses for any blown fuses for engine and ecm run/control.
Car show? Open house ? I’m in Topeka ! I’ll come up for sure! I might even bring my brothers 67 c10 rat rod patina build we did !
You may have a fuel relay not working.