HIGH PRESSURE FUEL PUMP REPAIR FOR 20$ BMW/PORSCHE

YOU MAY ENCOUNTER DELAYED START, LACK OF POWER AND IN WORST CASE NO START CONDITION.
BMW HPFP PART# 13517616170
PORSCHE CAYNNE PART# 94811031525
ERROR CODE:
2C01 High pressure fuel, plausibility Pressure too low
SHADOW CODES:
2BDE Fuel high pressure on enabling of injection: pressure too low
2BF0 Kraftstoffhochdruck bei oder nach Freigabe der Einspritzung (2. Umweltbedingungssatz nach Zeitverzogerung): Druck zu niedrig - High fuel pressure during or after release of injection (2nd set of environmental conditions after time delay): Pressure too low
Engine Fault
Full engine power no longer available
Oil used is 5w40
Vacuum applied 53ml in the syringe without any leak. 50 ml will be Good.
For more info please watch the below video
• HIGH PRESSURE FUEL PUM...

[@bimmerhacks]

This is the best way to fill oil by completely immersing in Oil
Details on how to dissemble and start the procedure please follow the below link.
th-cam.com/video/Nw16sjVMTXA/w-d-xo.html

[@SaltyDiver]

Thank you so much for this! I have had one hpfp on my shelf for years waiting for this!! 🎉🎉🎉🎉

[@VinMan-tc9ek]

Codes keep coming back. Is my pump defective or is my o ring wrong? I used 20x2

[@bimmerhacks]

Measure the diaphragm depth. If it's more than 20 u have leaking diaphragm or o-ring

[@БатырбекТажибай]

Привет я думаю что сальник не держит давлению . Дайте знат как результат

[@bimmerhacks]

still running smoothly. The one that might get leak is the O-ring or your diaphragm might have crack

[@patrickaraujo1685]

Hi, i find only oil seal 12x22x7 , it do the job ? Thanks !

[@bimmerhacks]

Yes