Installing a 2 inch Leveling Kit on a 2021 Silverado.
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- I install a 2" leveling \ lift kit on a 2021 Sileverao \ Sierra 2wd truck. The job only takes about 20 min.
2" Leveling Kit amzn.to/31H5zK0
Ridgid 3/8 Sub Compact Impact amzn.to/3dAvJ6C
CASOMAN 3/8" Drive Impact Socket Set amzn.to/384EBQm
Gearwrench 33" Extendable pry bar amzn.to/3vZQFLu
737mechanic Amazon Store Front
www.amazon.com... - ยานยนต์และพาหนะ
2" Leveling Kit amzn.to/31H5zK0
Ridgid 3/8 Sub Compact Impact amzn.to/3dAvJ6C
CASOMAN 3/8" Drive Impact Socket Set amzn.to/384EBQm
Gearwrench 33" Extendable pry bar amzn.to/3vZQFLu
737mechanic Amazon Store Front
www.amazon.com/shop/737mechanic/list/CR3BU74FTDU1?ref_=cm_sw_r_cp_ud_aipsflist_aipsf737mechanic_W4QMHMJ1JD67FDBCQHRK
You just robbed over a million dollar from all mechanics around the world with this one video. it's safe to say I'm going to install My Level kit myself
Just did mine and it came out great ordered the same kit and followed the vid. Thanks man💯! The dealership said $675.00 I paid $17.50 for the tools I didn’t have 😂
I failed congratulations damn it it was hard I had no help also😢
@@williamsfrenchiesandbullys how did you fail? I'm about to do it myself too. Are you mechanically inclined?
Would you suggest the poly over aluminum for the leveling kit? I saw the aluminum is $10 more on amazon.
The nice thing about the poly is it will never corrode and it is plenty strong enough so it will not be able to be crushed.
Hey i went to the link but id does not show this will work for a 2019 chevy silverado 1500 Lt rwd, the amazon link just shows 2018 is there another kit that's similar you recommend to be installed like how you did it
This kit shows from 2007 to 2024, the kit I listed will work as well they simply need to update their listing to include the newer model years.
amzn.to/3HDnzK8
thank you
@@737mechanic
Any reason why you installed the bolts from the top with the nut on the bottom? It seems to me the nuts on top would be better so you dont hit something under your truck with those bolts sticking down.
The only reason is on a 4wd the bolts will hit the half shaft if going in from the bottom up. On a 2wd it wouldn't matter.
Yup just picked up a 2021 1500 2wd and going to do this install myself can’t wait!!
Anybody know what the blue paint splattered all over is all about? My GMC has the same thing, I thought I hit a paint can on the road
All the blue markings are from the factory. They have to inspect every location you see a blue spot and that shows it has been inspected.
Just bought my first truck and will be getting 33s” soon, so I’m looking to get a levelling kit. By getting a 2” inch front levelling kit it will make the whole truck levelled? Like the front will match with the back? So I don’t need to change anything in the back & just get the front levelled?
2021 RST
Yes, what I found was it will be about 1/2 in lower in the front if you use a 2in leveling kit but that in my opinion is perfect.
@@737mechanic so to get the truck completely level would you recommend a 2 1/2” leveling?
@@babybugspaw7085 Probably, But the best thing to do is measure from the ground to the top of the front and rear wheel well lip and see what the difference is.
@@737mechanic to get the truest measurement measure from the bottom lip of the rim to the fender that way you dont lose anything from tire pressure or what not
I couldn’t get the control arm to drop. Bolt just spins. Any tips?
What bolt is spinning?
@@737mechanic never I d bud I got it off. Truck is looking great. But I used the same kit as you did and only got 1.5” height difference.
Great video! Seems super easy with your techniques. Only concern is how do them poly spacers hold up within time vs a metal spacer? Thanks
They have been around for years and I have never heard any complaints.
@@737mechanic very cool! Thank you.
@@737mechanic do you have to have a realignment done. When using those spacers. I only ask cause I just bought a 2019 Silverado and about to level it using the same spacers
@@brettc1984 I had mine checked after I installed them and it was still within limits. So what I would do next time is as long as the steering wheel is still centered while driving I would keep an eye on the tires and if it looks like the tires are wearing on the inner or outer sides then have it aligned.
@@737mechanic ok thanks man.
I'm getting the metal one made by Readylift...
Im going to install on my 2021 silverado 1500. Could you post the Amazon brand and part number for the kit you installed.
amzn.to/3iBjPA0
Thank You, i just ordered the kit👍😎
Does it void the suspension warranty?
Shouldn't be
Do you need to get the front aligned after this type of level kit ?
It shouldn't change the alignment but it would be good to keep an eye on the tire wear and if you are getting any wear then get the alignment checked.
I did this on a 2007 this evening. All I took loose was the sway bar links. It was a fight but I got it in
Install the same with 4x4?
Well that looks super easy. Dang. Looked like you got 2 1/4" of lift too. I counted an extra 1/8 before and after.
How one inch thickness gives you 2 inch lift?
th-cam.com/video/fcQWvO85DZ8/w-d-xo.html
I’m guessing since you’re messing with the front suspension you have to get an alignment afterwards right?
A 2 in leveling kit generally doesn't change the alignment much at all. What I tell people is make sure the steering wheel is straight and keep an eye on the front tires for the first couple of months. If the tires look like or feel like they are starting to wear funny then have the alignment checked.
@@737mechanic appreciated
Yes
Did you lift up one wheel at a time or both?
I did one at a time.
Can i use this same exact leveling kit for my 2019 silverado 1500, 4WD ??
You should be able to.
Thank you .! 🤝🏻
@@JoanConjuntoRelinchodid you install ? How was it with the front axle ?
Thank you big Bro !
Do you need to torque the bolts ? From the spacer
The bolts need to be tight enough to not come loose.
Where should the jack be placed at?
On the frame so the suspension can extend its full travel.
did you complete the other side before doing this video? 3:10 Was the other side any different? Did you have to remove extra stuff? thanks!
Both sides were the same.
@@737mechanic Last question. Why are other videos so different from this one. I love your approach don't get me wrong, but is there a reason why other videos take so many things apart? Part of me feels the easy way can cause issues later on? I can be totally wrong. I prefer your way 100%. thank you!
@@edscorsese I have been a mechanic for almost 40 years and I have always thought things through as I look at ways to accomplish what I am needing too. The one thing I have noticed over the years is how many mechanics make things much harder than they need to. Sometimes there is no way around doing something the long way but many times there are. Most these youtube guys are simply following instructions or doing things based on what they have seen in other videos.
For instance, I replaced an alternator on a Nissan Murano the other day and the manufactures instructions say to remove the radiator I showed in the video that it is NOT necessary.
th-cam.com/video/sNkba5TwkAk/w-d-xo.html
I changed the HID bulbs on a 2008 Infiniti QX56 and the manual tells you to remove the entire front bumper cover, I did it without removing the cover and it is much easier and less chance of messing anything up.
th-cam.com/video/q6RRlc8L2NQ/w-d-xo.html
My hole idea is if it can be done quicker and easier I try to do it.
As far as the leveling kit, the outcome doing the way I did accomplishes the same thing in the end and it isn't like you leave anything off or un-done.
The nicest thing about youtube is you can watch a few video on the same subject and you can usually get a good idea of how you want to do it.
@@737mechanic Thank you for your response sir. I appreciate your wisdom based on your experience!
thank you thank you thank you Boss man🤟🏿
Once you complete it how does it handle & drive? Do you have to get the front end aligned afterwards?
Thank you for showing
Handles and rides the same, been keeping an eye on the tires and have not seen a reason to get it aligned.
Any suspension lift with the exception of a body lift do need a realignment.
great video, the 2.5" inch will be a problem, looks like there is no more room than 2", what you think? thanks
Yea it was tight when I put the 2" in so I am sure it would be tighter with 2.5.
did you end up doing a 2.5"? I'm up in the air between 2" and 2.5"
@@BoStErO1905 2.5 looks amazing, but I ended up needing the help of a friend to handle that, it was a tough day LOL
I installed this very kit on my 2020 1500 2wd yesterday and it turned out great!
What part# is it do you mind sharing the link?
Did you have to get an alignment after?
@@josea3534 Sorry for the late reply. I didn't have to get an alignment.
Why lift a 2wd
How is the clearance between the leveling kit and the cv boot. Do you have any videos of that?
This truck was a 2wd so there isn’t a cv boot. On my 2016 4wd you have to put the bolts in with the head on top and nut on bottom otherwise there is a risk of the extra threads hitting the axle shaft. I would assume the newer trucks will be similar.
@@737mechaniccan you still install the same way on the 4 wheel drive?
Do the truck needs alignment after that?
It shouldn't affect it but monitor the tires for wear for the next few thousand miles and if you are getting inner or outer tire wear have the alignment checked.
Ordered kit from his link did not fit 2020 crewcab silverado
Why did it not fit?
@@737mechanic didn't align with mounting holes strut to lower A arm also bolts would of been to short as well!
Is it any different for a 4wd Silverado?
A 4wd you have to bust the upper ball joint lose .
Do you know if a 2021 f150 4wd will be like this?
Looks like the f-150 leveling kit installs on the top of the strut only.
Thanks
Can this work for 4x4 as well?
Is a 2.5 the same way or would I need something else?
I'm not sure.
Did u ever get the front end Alignment after did u need it?
I had it checked and it was good.
Good to hear man I'm putting mine on tomorrow thanks for the video help man I was about to pay $300
Do you need to do an alignment?
The alignment doesn't change much, so you can keep an eye on your front tires for a month or so and as long as the steering wheel is straight and the tires are not wearing abnormally, you should be fine.
Have you used 4wd auto? If so, any issues?
No issues at all.
@@737mechanic Thanks that’s good to know
Does this void the warranty?
You should no measure with just 1 side lift
would you have to do an alignment after the install?
It is best to have it checked but in reality, all you need to do is keep an eye on your tires and if they start wearing on the inboard or outboard side then get it aligned.
@@737mechanic 4wheel parts in southern California want to charge 600 for putting on a 2" leveling kit and doing an alignment... can you believe that?
@@BoStErO1905 Thats crazy.
Would this leveling kit work on a 2022 silverado 1500 2wd?
I would think so, as far as I know, the 22 has the same setup as the 21. If you look under the truck and if it still has the 2 bolts holding the bottom strut to the lower control arm then more than likely it will work.
Thanks for the info 👍
Did you jack the truck up?
Yea
Is the 2 inch leveling kit all I need ? I am new to this so idk if I need any extra parts to go along with it. I’ve seen people talk about spacers but not to sure
It's all you should need.
any problems with your upper control arms? I've heard on these new 1500s the upper control arms are snapping? also how is your CV boot? heard with lower lift it can rip them.
This was a 2wd model, I can't imagine a 2" lift causing any problems or extra stress on the upper control arms. The suspension travel is way more than 2" so it's not in any kind of bind.
My upper ball joint just snapped on my 2019 Silverado RST. Not good!
@@readreacthockey6760and did you have the 2in lift ?
@@readreacthockey6760 from this lift?
Any lift up to 2" is ok. Anything past that it's recommended you change upper control arms.
With a 2 in level like this could I fit 275/60/20 tires without rub? I’m looking at buying the Oem factory wheels off a 2020 silverado rst. I have a 2017 Silverado LT
I’m not sure about those 3rd gens ; if it’ll fit on your model. 4th gens seem to fit a little bit bigger tires stock height I think
I wanted to see the truck from the side... howd it turn out?
Anybody changed the factory upper control with 2 inch leveling kit? They said the 2 inch leveling put too much stress on the factory upper ball joint and it can fail at anytime..
I haven't heard that, if all it takes is 2 inch's to stress the upper ball joint then that is a poorly designed suspension.
Where is the jack located because I did the same thing on the same truck and it didn’t drop at all
Put it under the frame of the truck so the suspension will extend and relax. If after taking the lower bolts out if the control arm doesn't drop anymore just use a prybar and give it a bit of help.
Now you just need new wheels! Slap on some 34’s
Don't see why the 4x4 would be any different. Just pry it in there
do to the axle shaft that gets in the way of putting bolt in from the top
Can I install this on my 2018 sierra 1500 4wd even if I have a 3in spacer on top of the strut?
I wouldn't because the natural angle of the control arms will be way off and could cause premature ball joint wear and or failure.
@@737mechanic would aftermarket control arms from rough country or something balance that out?
@@joshmitchell1196 yes
Hello! Did you lift the truck and put jack stands before doing all this? Thanks!
Yes
Nice looking truck with chrome and red.
Would this work with the ready lift kit?
that a way to strip the threads. lol
It can but you kinda got to know how m7ch abuse a thread can take.
@@737mechanic I just installed mine today on my 2019. Was in no way as easy as yours. Lol. And, your absolutely correct about the threads sir
@@737mechanic I thought maybe the weight of the wheel would help with separating
@@jesseclark2176 Is yours 4wd?
@@737mechanic no, just 2wd
Tried doing this it was super hard
Will it work on 4wd?
Yes. I have a video of a 2016 sierra. It should be the same as it
I just spent 1hr attempting this and gave up.. My tire was off the ground by a few inches and still gave me zero space to squeeze the block in between.. Maybe I got to get a second jack to jack up the shock/strut
did you place the jack under the frame so it will let the suspension extend, if so you may have to use a pry bar after you remove the lower strut bolts to separate it enough to get the spacer in?
You did not used a jack ??
I talked about the jack in the video.
Do the bolts have to be torqued a certain amount or no?
I just snugged them up but the torque is 37ftlbs.
Just received mine. Cant wait to install. However I do have a 4 wheel drive. I am sure I will need an alignment.
Did u installed it ?
Did you need an alignment?
Nothing like spending $45k on a truck and using a $20 leveling block off Amazon!!! 🤦🏼
Yup, No reason to spend any more than that.
Will it work for 2020 Silverado?
Yes
Did the clips go back on?
No, the clips are discarded and nuts are used.
I have a 2021 Silverado RST Z71. It’s a 4x4. I get I need to measure and stuff to find out what I need. However, I also heard that leveling kit by itself might hurt the CV angles and joints, etc. What do you think about this? And if that is the case are there any complete kits that you recommend?
I think a 2 inch leveling kit is not enough of a change to hurt anything.
Did this to my 2015 and had to change the control arms and bushings out several times because of the stress on it. I’d advise a real lift kit
@@kdssupplyllc2720 if you believe this kit caused your suspension to fail prematurely why would you continue to have it on and replaced your suspension components “several times” makes no sense. Also, you should know that suspension parts will eventually fail from wear and tear even on stock status without a leveling kit. So would you share the reasons why you took the repetitive actions?
Can i use a bottle jack to lift the strut
Sure as long as you can get it in there. If you have a long pro bar you can try prying the control arm down also.
@@737mechanic thank you might do it this weekend
Is a wheel alignment needed after
It doesn't change it much but it would be a good idea to have it checked.
Can you fit 35's on 2inch leveling kit?
They only recommend 33’s but 35’s would probably fit with possible rubbing either with full suspension travel or turning.
Plastic or metal
Plastic but they also make aluminum.
How much should I be paying for this type of level kit? Materials and labor?
The kits is 25 to 50 dollars. I put a link in the description. I charge $100.00 to put them in but I am not sure what a shop would charge.
I got an estimate yesterday with this same kit and they charged me $545 materials and labor. 😳
@@ivancazares1294 That doesn't surprise me.
@@737mechanic where are you located?
@@jackwagnon1048 East of Dallas Texas.
It looks higher than rear wheels? Or im wrong .
It was 1/2in lower in the front than the rear.
Great tutorial! Curious how the polymer on the kit has held up?
Still going strong. I don't see it having any problems at all.
How far off the ground do you need to lift the tires to allow the install of the two inch leveling block. I purchase the kit from Amazon you used. Thanks
You put the spacer on upside down
Yes, it doesn’t matter which way they go in and on that side the lower control arm seemed to interfere so I flipped it upside down and it fit better.
What state are you located in
Texas
@@737mechanicsorry for the late response in in gonzales tx how far are you away lol I tried and I failed just put it back together but have to figuer out how to tighten the stabilizer bar it keeps spinning smh
@@737mechanicif your close enough how much you charge to knock this out sir