For me, the ideas in th-cam.com/users/postUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
I’ve watched many of your/his videos. This guys knows his stuff. Very smart guy!! Just says “Umm” like a thousand times each video, “umm” is his favorite word. Just saying! Lol!
Great video. What I don’t understand about seems is how you are supposed to nail both ends to one stud. You are only supposed to stay at least 3/4” from the ends, but a stud is only 1.5” wide, so even if you put your seem exactly in the middle of the stud, your nails would be right at the end of the wood. Are you supposed to angle them inward? Still doesn’t leave any room for error.
I far I as understand James Hardie recommends you leave an expansion gap between butt/running joints and these are longer to be 'caulked' but left dry Previously JH did recommend caulking of butt joints but caulking weathered out over time and needed repeat maintenance.
Can some one help? How do you do the finish all the way to the top- too many video showing how to start but never how to do the finish (do you put a trim over ?)
@@NSMConstruction Question, so it's ok to not caulk as long as there's flashing behind, and also if I lower my reveal to 6.5 will that extra half inch lower nail line give the board better holding/ pulling resistance power.
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
For me, the ideas in th-cam.com/users/postUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
You are doing an amazing Nate impression from The Office.
I’ve watched many of your/his videos. This guys knows his stuff. Very smart guy!!
Just says “Umm” like a thousand times each video, “umm” is his favorite word.
Just saying! Lol!
Rite but he's really good
Holy crap he’s fast with that hammer I’ve never seen anyone faster!
Great video. What I don’t understand about seems is how you are supposed to nail both ends to one stud. You are only supposed to stay at least 3/4” from the ends, but a stud is only 1.5” wide, so even if you put your seem exactly in the middle of the stud, your nails would be right at the end of the wood. Are you supposed to angle them inward? Still doesn’t leave any room for error.
Thanks for the how-to's...there doesn't seem to be many good videos on hardie installations.
I far I as understand James Hardie recommends you leave an expansion gap between butt/running joints and these are longer to be 'caulked' but left dry
Previously JH did recommend caulking of butt joints but caulking weathered out over time and needed repeat maintenance.
Drinking game:
Take a shot every time he says umm🥴
Can some one help? How do you do the finish all the way to the top- too many video showing how to start but never how to do the finish (do you put a trim over ?)
Im gonna count all the Uuummms. Got nothing better to do.
perfection!
Could you anchor this to a concrete driveway?
No expansion gap? - a bit sketchy...
Chopsaw with masonry blade work well, wear a mask it gets dusty!🤓
Can you use screws
Uuummmm
How do I do a repair to existing Hardiplank siding with existing hidden nailers?
Bob Crochetiere pin nail the face about all you can do. Cut the nails
How do you repair a random row in the middle?
Here is a great video from Ask This Old House that will walk you through the process!
th-cam.com/video/bz9JoJGWvI4/w-d-xo.html
He said Um 974 times
Um um um um
dnt u see that board stickin down an eigth like wtf
Thank you for pointing that out and also thank you for watching our channel!
um
um
um
um
um
um
um
um great video but really need to stop starting every sentence with Um....
other videos recommend caulking the seams---
@@NSMConstruction
Question, so it's ok to not caulk as long as there's flashing behind, and also if I lower my reveal to 6.5 will that extra half inch lower nail line give the board better holding/ pulling resistance power.
56 uh and umms.
Ummmm!!!
He has way too many eh eh eh. O ring. He needs to learn to talk.